Yu Zhao
Affiliations:- Beihang University, School of Reliability and Systems Engineering, Beijing, China
According to our database1,
Yu Zhao
authored at least 45 papers
between 2011 and 2024.
Collaborative distances:
Collaborative distances:
Timeline
Legend:
Book In proceedings Article PhD thesis Dataset OtherLinks
On csauthors.net:
Bibliography
2024
Condition-based maintenance management for two-stage continuous deterioration with two-dimensional inspection errors.
Qual. Reliab. Eng. Int., November, 2024
2023
Reliability demonstration test plan for degraded products subject to Gamma process with unit heterogeneity.
Reliab. Eng. Syst. Saf., December, 2023
Reliability acceptance sampling plan for degraded products subject to Wiener process with unit heterogeneity.
Reliab. Eng. Syst. Saf., 2023
Jointly Optimizing Production, Quality Inspection and Maintenance Policies for an Unreliable Production System.
Proceedings of the IEEE International Conference on Industrial Engineering and Engineering Management, 2023
2022
Generally weighted moving average control chart for monitoring two-parameter exponential distribution with measurement errors.
Comput. Ind. Eng., 2022
Reliability Modeling and Rework Strategy Evaluation of Manufacturing System based on Stochastic-flow Network.
Proceedings of the IEEE International Conference on Industrial Engineering and Engineering Management, 2022
2020
Reliability modeling methods for load-sharing <i>k</i>-out-of-<i>n</i> system subject to discrete external load.
Reliab. Eng. Syst. Saf., 2020
Reliab. Eng. Syst. Saf., 2020
Entropy, 2020
Reliability Evaluation for Manufacturing System Based on Dynamic Adaptive Fuzzy Reasoning Petri Net.
IEEE Access, 2020
2019
A new reliability analysis method for load-sharing <i>k</i>-out-of-<i>n</i>: F system based on load-strength model.
Reliab. Eng. Syst. Saf., 2019
A novel pseudo-maximum likelihood estimation method for accelerated degradation tests under Wiener process.
Qual. Reliab. Eng. Int., 2019
The Method for Risk Evaluation in Assembly Process based on the Discrete-Time SIRS Epidemic Model and Information Entropy.
Entropy, 2019
A Novel Approach to Support Failure Mode, Effects, and Criticality Analysis Based on Complex Networks.
Entropy, 2019
The Analysis of Defect Emergence in Assembly Process Based on the Discrete-Time SIRS Model.
IEEE Access, 2019
Research on the Propagation of Defects in Assembly Process Based on SIR Epidemic Model.
Proceedings of the 2019 IEEE International Conference on Prognostics and Health Management, 2019
2018
Reliab. Eng. Syst. Saf., 2018
Entropy, 2018
Screening Scheme Evaluation of the Assembly Process Based on the Stress-Strength Model and Defect Stream Analysis.
Entropy, 2018
Multi-level maintenance strategy of deteriorating systems subject to two-stage inspection.
Comput. Ind. Eng., 2018
Remaining Useful Life Prediction Using a Novel Two-Stage Wiener Process With Stage Correlation.
IEEE Access, 2018
Mechanism Equivalence in Designing Optimum Step-Stress Accelerated Degradation Test Plan Under Wiener Process.
IEEE Access, 2018
An Extended Model for Fatigue Life Prediction and Acceleration Considering Load Frequency Effect.
IEEE Access, 2018
Time-dependent Reliability Modelling Method Based on Load-strength Model in the Presence of Environmental Effects.
Proceedings of the 2018 IEEE International Conference on Industrial Engineering and Engineering Management, 2018
A Multi-objective Framework for Designing Accelerated Degradation Tests Under Wiener Process Model.
Proceedings of the 2018 IEEE International Conference on Industrial Engineering and Engineering Management, 2018
2017
A Stress-Strength Time-Varying Correlation Interference Model for Structural Reliability Analysis Using Copulas.
IEEE Trans. Reliab., 2017
A preventive maintenance policy based on dependent two-stage deterioration and external shocks.
Reliab. Eng. Syst. Saf., 2017
Optimal design of constant-stress accelerated degradation tests using the M-optimality criterion.
Reliab. Eng. Syst. Saf., 2017
Qual. Reliab. Eng. Int., 2017
Equivalence analysis of accelerated degradation mechanism based on stochastic degradation models.
Qual. Reliab. Eng. Int., 2017
Reliability evaluation of non-repairable phased-mission common bus systems with common cause failures.
Comput. Ind. Eng., 2017
A condition-based maintenance model for a three-state system subject to degradation and environmental shocks.
Comput. Ind. Eng., 2017
Reliability Demonstration for Long-Life Products Based on Hardened Testing Method and Gamma Process.
IEEE Access, 2017
2016
Reliability evaluation of linear multi-state consecutively-connected systems constrained by m consecutive and n total gaps.
Reliab. Eng. Syst. Saf., 2016
A delay time model for a mission-based system subject to periodic and random inspection and postponed replacement.
Reliab. Eng. Syst. Saf., 2016
Qual. Reliab. Eng. Int., 2016
2015
IEEE Trans. Reliab., 2015
Reliability modelling and verification of manufacturing processes based on process knowledge management.
Int. J. Comput. Integr. Manuf., 2015
Commun. Stat. Simul. Comput., 2015
Proceedings of the 13th IEEE International Conference on Industrial Informatics, 2015
2014
Space-partition method for the variance-based sensitivity analysis: Optimal partition scheme and comparative study.
Reliab. Eng. Syst. Saf., 2014
Eur. J. Oper. Res., 2014
2013
Simultaneous Optimization of Robust Parameter and Tolerance Design Based on Generalized Linear Models.
Qual. Reliab. Eng. Int., 2013
2011
An integration design optimization framework of robust design, axiomatic design, and reliability-based design.
Qual. Reliab. Eng. Int., 2011