Youtong Fang
Orcid: 0000-0002-8521-4184Affiliations:
- Zhejiang University, Hangzhou, China
According to our database1,
Youtong Fang
authored at least 53 papers
between 2012 and 2024.
Collaborative distances:
Collaborative distances:
Timeline
Legend:
Book In proceedings Article PhD thesis Dataset OtherLinks
Online presence:
-
on orcid.org
On csauthors.net:
Bibliography
2024
A Two-Step Event-Triggered-Based Data-Driven Predictive Control for Power Converters.
IEEE Trans. Ind. Electron., November, 2024
IEEE Trans. Intell. Transp. Syst., May, 2024
IEEE Trans. Ind. Electron., April, 2024
A Two-Phase Lifetime Prediction Model of Generator Stator Main Wall Insulation Driven by Digital Twin.
IEEE Trans. Instrum. Meas., 2024
Remaining Useful Life Prediction Method by Integrating Two-Phase Accelerated Degradation Data and Field Information.
IEEE Trans. Instrum. Meas., 2024
IEEE Trans. Ind. Electron., 2024
Predictive Control of Voltage Source Inverter: An Online Reinforcement Learning Solution.
IEEE Trans. Ind. Electron., 2024
Modeling and Optimization for Submersible Pump Tubular Linear Motor Based on Dynamic Load Analysis.
IEEE Access, 2024
2023
Demand Response Potential Evaluation of Aggregated High-Speed Trains Toward Power System Operation.
IEEE Trans. Smart Grid, September, 2023
Predictor-Based Data-Driven Model-Free Adaptive Predictive Control of Power Converters Using Machine Learning.
IEEE Trans. Ind. Electron., August, 2023
IEEE Trans. Ind. Electron., 2023
IEEE Trans. Ind. Electron., 2023
IEEE Trans. Ind. Electron., 2023
Improving the Robustness of Deep Convolutional Neural Networks Through Feature Learning.
CoRR, 2023
A Novel Optimization Framework for High Dynamics Point-to-Point Direct Drive Motion Control System With a New Type of Surrogate Model.
IEEE Access, 2023
Comparison of Two Finite-Permeability Subdomain Models for Surface-Mounted Permanent-Magnet Machines.
IEEE Access, 2023
A Multi-Objective Finite-Element Method Optimization That Reduces Computation Resources Through Subdomain Model Assistance, for Surface-Mounted Permanent-Magnet Machines Used in Motion Systems.
IEEE Access, 2023
A Direct-Drive Permanent-Magnet Motor Selective Compliance Assembly Robot Arm: Modeling, Motion Control, and Trajectory Optimization Based on Direct Collocation Method.
IEEE Access, 2023
2022
IEEE Trans. Ind. Electron., 2022
Influence of Start Rotor Position on Three-Phase Short-Circuit Current in Dual Three-Phase Surface-Mounted PM Machines.
IEEE Trans. Ind. Electron., 2022
Sensors, 2022
2021
Multialgorithm Fusion Image Processing for High Speed Railway Dropper Failure-Defect Detection.
IEEE Trans. Syst. Man Cybern. Syst., 2021
Novel Fault-Tolerant Doubly Fed Flux Reversal Machine With Armature Windings Wound on Both Stator and Rotor Teeth.
IEEE Trans. Ind. Electron., 2021
Improved Stator/Rotor-Pole Number Combinations for Torque Ripple Reduction in Doubly Salient PM Machines.
IEEE Trans. Ind. Electron., 2021
Predictor-Based Neural Network Finite-Set Predictive Control for Modular Multilevel Converter.
IEEE Trans. Ind. Electron., 2021
IEEE Access, 2021
Design and Implementation of an Auto-Oriented Bidirectional ZCS Hybrid Circuit Breaker.
IEEE Access, 2021
Online Demagnetization Monitoring of Dual Y Shift 30 Degree Six-phase Permanent Magnet Synchronous Motor.
Proceedings of the 30th IEEE International Symposium on Industrial Electronics, 2021
2020
A Novel Doubly-Fed Flux-Switching Permanent Magnet Machine With Armature Windings Wound on Both Stator Poles and Rotor Teeth.
IEEE Trans. Ind. Electron., 2020
On-Load Field Prediction in SPM Machines by a Subdomain and Magnetic Circuit Hybrid Model.
IEEE Trans. Ind. Electron., 2020
Comparative Study of Novel Doubly-Fed Linear Switched Flux Permanent Magnet Machines With Different Primary Structures.
IEEE Access, 2020
Fast Finite-Set Model Predictive Control for Three-Phase Four-Arm Active Front End Modular Multilevel Converters Under Unbalanced and Distorted Network Conditions.
IEEE Access, 2020
Passivity-Based Cascade-Free Finite-Set Model Predictive Control for Nested Neutral Point-Clamped Converters.
IEEE Access, 2020
Current Prediction Error Reduction Method of Predictive Current Control for Permanent Magnet Synchronous Motors.
IEEE Access, 2020
Single- and Two-Phase Open-Circuit Fault Tolerant Control for Dual Three-Phase PM Motor Without Phase Shifting.
IEEE Access, 2020
Optimization Research on a Switching Power Amplifier and a Current Control Strategy of Active Magnetic Bearing.
IEEE Access, 2020
Torque Ripple Reduction of a Salient-Pole Permanent Magnet Synchronous Machine With an Advanced Step-Skewed Rotor Design.
IEEE Access, 2020
Proceedings of the Fifteenth International Conference on Ecological Vehicles and Renewable Energies, 2020
Research and Applications of Permanent Magnet Machines for Novel Railway Transportation Internal Combustion Power Packs.
Proceedings of the Fifteenth International Conference on Ecological Vehicles and Renewable Energies, 2020
2019
Proceedings of the 28th IEEE International Symposium on Industrial Electronics, 2019
2018
Compensation of DC-Link Voltage Fluctuation for Railway Traction PMSM in Multiple Low-Switching-Frequency Synchronous Space Vector Modulation Modes.
IEEE Trans. Veh. Technol., 2018
IEEE Trans. Ind. Electron., 2018
Common mode current suppression for permanent magnet synchronous motor based on model predictive control.
Proceedings of the Thirteenth International Conference on Ecological Vehicles and Renewable Energies, 2018
A modified jiles-atherton model for estimating the iron loss of electrical steel considering DC bias.
Proceedings of the Thirteenth International Conference on Ecological Vehicles and Renewable Energies, 2018
2017
DC-link-fluctuation-resistant control scheme for high power traction PMSM in six-step mode.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017
Direct torque control for brushless DC motors in aerospace applications with single sided matrix converters with reduced torque ripple.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017
2016
Optimal inspection-based preventive maintenance policy for three-state mechanical components under competing failure modes.
Reliab. Eng. Syst. Saf., 2016
2014
Resonance Damping and Harmonic Suppression for Grid-Connected Current-Source Converter.
IEEE Trans. Ind. Electron., 2014
2012
A Single Sided Matrix Converter Drive for a Brushless DC Motor in Aerospace Applications.
IEEE Trans. Ind. Electron., 2012
Design of a Five-Phase Brushless DC Motor for a Safety Critical Aerospace Application.
IEEE Trans. Ind. Electron., 2012
J. Zhejiang Univ. Sci. C, 2012
Design of interior PM synchronous traction motor with novel approximate skewed rotor.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012