Yoke San Wong

According to our database, Yoke San Wong authored at least 55 papers between 1997 and 2017.

Collaborative distances:

• Dijkstra number of five.
• Erdős number of four.

2017

An RBF neural network approach to geometric error compensation with displacement measurements only.

Rui Yang, Kok Kiong Tan, Arthur Tay, Sunan Huang, Jie Sun, Jerry Y. H. Fuh, Yoke San Wong, Chek Sing Teo, Zidong Wang

Neural Comput. Appl., 2017

2015

Adaptive Feed Rate Policies for Spiral Drilling Using Markov Decision Process.

Yedige Tlegenov, Yoke San Wong, Geok Soon Hong

CoRR, 2015

Adaptive-VDHMM for prognostics in tool condition monitoring.

Wu Yue, Yoke San Wong, Geok Soon Hong

Proceedings of the 6th International Conference on Automation, Robotics and Applications, 2015

2013

Graphic Processing Units (GPUs)-Based Haptic Simulator for Dental Implant Surgery.

Fei Zheng, Wen Feng Lu, Yoke San Wong, Kelvin Weng Chiong Foong

J. Comput. Inf. Sci. Eng., 2013

Fabrication of electronic devices with multi-material drop-on-demand dispensing system.

Jie Sun, Jerry Y. H. Fuh, Eng San Thian, Geok Soon Hong, Yoke San Wong, Rui Yang, Kok Kiong Tan

Int. J. Comput. Integr. Manuf., 2013

3D dental biometrics: Alignment and matching of dental casts for human identification.

Xin Zhong, Deping Yu, Yoke San Wong, Terence Sim, Wen Feng Lu, Kelvin Weng Chiong Foong, Ho-Lun Cheng

Comput. Ind., 2013

2012

A study of foot and ankle kinematics during stance phase of normal walking.

Xue Wang, Wen Feng Lu, Han Tong Loh, Yoke San Wong, Fook Rhu Ong

Int. J. Comput. Appl. Technol., 2012

Feature analysis in tool condition monitoring: a case study in titanium machining.

Jie Sun, Yoke San Wong, Geok Soon Hong, Mustafizur Rahman

Int. J. Comput. Appl. Technol., 2012

An analytical drilling force model and GPU-accelerated haptics-based simulation framework of the pilot drilling procedure for micro-implants surgery training.

Fei Zheng, Wen Feng Lu, Yoke San Wong, Kelvin Weng Chiong Foong

Comput. Methods Programs Biomed., 2012

3D CAD model retrieval with perturbed Laplacian spectra.

Kunpeng Zhu, Yoke San Wong, Han Tong Loh, Wen Feng Lu

Comput. Ind., 2012

2011

Multiscale Singularity Analysis of Cutting Forces for Micromilling Tool-Wear Monitoring.

Kunpeng Zhu, Geok Soon Hong, Yoke San Wong

IEEE Trans. Ind. Electron., 2011

A manufacturing-oriented approach for multi-platforming product family design with modified genetic algorithm.

Zhuo Liu, Yoke San Wong, Kim Seng Lee

J. Intell. Manuf., 2011

Integral Sliding Mode Control for Fast Tool Servo Diamond Turning of Micro-Structured Surfaces.

Deping Yu, Geok Soon Hong, Yoke San Wong

Int. J. Autom. Technol., 2011

Towards automated pose invariant 3D dental biometrics.

Xin Zhong, Deping Yu, Kelvin W. C. Foong, Terence Sim, Yoke San Wong, Ho-Lun Cheng

Proceedings of the 2011 IEEE International Joint Conference on Biometrics, 2011

Voxel-based haptic training simulator for screw insertion in knee osteotomy.

Fei Zheng, Yoke San Wong, Wen Feng Lu

Proceedings of the 5th International Conference on Automation, Robotics and Applications, 2011

2010

3D CAD model matching from 2D local invariant features.

K. P. Zhu, Yoke San Wong, Wen Feng Lu, Han Tong Loh

Comput. Ind., 2010

2009

Optimal overlapping and functional interaction in product development.

Jun Lin, Kah-Hin Chai, Aarnout Brombacher, Yoke San Wong

Eur. J. Oper. Res., 2009

A diffusion wavelet approach for 3-D model matching.

K. P. Zhu, Yoke San Wong, Wen Feng Lu, Jerry Y. H. Fuh

Comput. Aided Des., 2009

3D CAD model search: A regularized manifold learning approach.

Kunpeng Zhu, Yoke San Wong, Han Tong Loh, Wen Feng Lu, Jerry Y. H. Fuh

Proceedings of the IEEE International Conference on Robotics and Biomimetics, 2009

Combination of piezoelectric printing and E-jet for microfabrication.

Jerry Ying Hsi Fuh, Sun Jie, Yoke San Wong, Han Tong Loh, Chan Sheue Lian

Proceedings of the IEEE International Conference on Robotics and Biomimetics, 2009

Modified GA-based optimizer for multi-objective product family design.

Zhuo Liu, Yoke San Wong, Kim Seng Lee

Proceedings of the 4th International Conference on Autonomous Robots and Agents, 2009

2008

Noise-Robust Tool Condition Monitoring in Micro-milling with Hidden Markov Models.

K. P. Zhu, Yoke San Wong, Geok Soon Hong

Proceedings of the Soft Computing Applications in Industry, 2008

A dynamic model for managing overlapped iterative product development.

Jun Lin, Kah-Hin Chai, Yoke San Wong, Aarnout Brombacher

Eur. J. Oper. Res., 2008

Identification of feature set for effective tool condition monitoring - a case study in titanium machining.

Jie Sun, Yoke San Wong, Geok Soon Hong, Mustafizur Rahman, Zhigang Wang

Proceedings of the 2008 IEEE International Conference on Automation Science and Engineering, 2008

2007

Application of statistical process control in injection mould manufacturing.

J. Cao, Yoke San Wong, Kim Seng Lee

Int. J. Comput. Integr. Manuf., 2007

Direct laser sintering of Cu-based metal for rapid tooling.

Y. Tang, Han Tong Loh, Jerry Y. H. Fuh, Yoke San Wong, L. Lu

Int. J. Comput. Appl. Technol., 2007

Dynamic workflow change in PDM systems.

Zhiming Qiu, Yoke San Wong

Comput. Ind., 2007

Role-based 3D visualisation for asynchronous PLM collaboration.

Zhiming Qiu, K. F. Kok, Yoke San Wong, Jerry Y. H. Fuh

Comput. Ind., 2007

Model-based monitoring and failure detection methodology for ball-nose end milling.

Sheng Huang, Kiah Mok Goh, Kah Chuan Shaw, Yoke San Wong, Geok Soon Hong

Proceedings of 12th IEEE International Conference on Emerging Technologies and Factory Automation, 2007

Towards Effective Multi-platforming Design of Product Family using Genetic Algorithm.

Zhuo Liu, Yoke San Wong, Kim Seng Lee

Proceedings of the IEEE Conference on Automation Science and Engineering, 2007

2006

An approach to minimize build errors in direct metal laser sintering.

Y. Ning, Yoke San Wong, Jerry Y. H. Fuh, Han Tong Loh

IEEE Trans Autom. Sci. Eng., 2006

Design Modification in a Collaborative Assembly Design Environment.

C. Lu, Jerry Y. H. Fuh, Yoke San Wong, Zhiming Qiu, Weidong Li, Y. Q. Lu

J. Comput. Inf. Sci. Eng., 2006

Accessibility comparison for optimal cutter selection in five-axis finish milling of sculptured surfaces.

L. L. Li, Yunfeng Zhang, Andrew Y. C. Nee, Jerry Y. H. Fuh, Yoke San Wong, M. Yeung, Z. Gui

Int. J. Manuf. Res., 2006

2005

Minimizing staircase errors in the orthogonal layered manufacturing system.

Yong Yang, Jerry Y. H. Fuh, Han Tong Loh, Yoke San Wong

IEEE Trans Autom. Sci. Eng., 2005

Development of a parallel optimization method based on genetic simulated annealing algorithm.

Zhigang Wang, Yoke San Wong, Mustafizur Rahman

Parallel Comput., 2005

Critical-path-analysis-based dynamic component supplier optimization.

X. G. Huang, Yoke San Wong, Z. J. Liu, Zhiming Qiu

Int. J. Comput. Integr. Manuf., 2005

Flank wear measurement by successive image analysis.

W. Wang, Yoke San Wong, Geok Soon Hong

Comput. Ind., 2005

Collaborative computer-aided design - research and development status.

Weidong Li, Wen Feng Lu, Jerry Y. H. Fuh, Yoke San Wong

Comput. Aided Des., 2005

Multi-niche crowding in the development of parallel genetic simulated annealing.

Zhigang Wang, Mustafizur Rahman, Yoke San Wong

Proceedings of the Genetic and Evolutionary Computation Conference, 2005

Research on a collaborative mould portal.

Minbo Li, Yoke San Wong, Yinsheng Li

Proceedings of the Ninth International Conference on Computer Supported Cooperative Work in Design, 2005

Research on Collaborative Application Portal of Mould and Hard Disk Drive Industry.

Minbo Li, Yoke San Wong, Yinsheng Li

Proceedings of the Computer Supported Cooperative Work in Design II, 2005

Benchmarking for decision making in rapid prototyping systems.

Mani Mahesh, Jerry Y. H. Fuh, Yoke San Wong, Han Tong Loh

Proceedings of the IEEE International Conference on Automation Science and Engineering, 2005

2004

A two-stage manufacturing partner selection framework for virtual enterprises.

X. G. Huang, Yoke San Wong, J. G. Wang

Int. J. Comput. Integr. Manuf., 2004

An Internet-enabled integrated system for co-design and concurrent engineering.

Weidong Li, Jerry Y. H. Fuh, Yoke San Wong

Comput. Ind., 2004

Modelling cloud data using an adaptive slicing approach.

Y. F. Wu, Yoke San Wong, Han Tong Loh, Yunfeng Zhang

Comput. Aided Des., 2004

Geometric model simplification for distributed CAD.

Zhiming Qiu, Yoke San Wong, Jerry Y. H. Fuh, Y. P. Chen, Zude Zhou, Weidong Li, Y. Q. Lu

Comput. Aided Des., 2004

Feature-based design in a distributed and collaborative environment.

Weidong Li, Soh-Khim Ong, Jerry Y. H. Fuh, Yoke San Wong, Y. Q. Lu, Andrew Y. C. Nee

Comput. Aided Des., 2004

The Application of Nonstandard Support Vector Machine in Tool Condition Monitoring System.

Jie Sun, Geok Soon Hong, Mustafizur Rahman, Yoke San Wong

Proceedings of the 2nd IEEE International Workshop on Electronic Design, 2004

2003

Feature extraction and volume decomposition for orthogonal layered manufacturing.

Yong Yang, Han Tong Loh, Jerry Y. H. Fuh, Yoke San Wong

Comput. Aided Des., 2003

Error-based segmentation of cloud data for direct rapid prototyping.

G. H. Liu, Yoke San Wong, Yunfeng Zhang, Han Tong Loh

Comput. Aided Des., 2003

Fuzzy decision guided component supplier selection.

Xingang Huang, Yoke San Wong, Zhejie Liu

Proceedings of the IEEE International Conference on Systems, 2003

2002

Adaptive fairing of digitized point data with discrete curvature.

G. H. Liu, Yoke San Wong, Yunfeng Zhang, Han Tong Loh

Comput. Aided Des., 2002

Feature Extraction and Selection in Tool Condition Monitoring System.

Jie Sun, Geok Soon Hong, Mustafizur Rahman, Yoke San Wong

Proceedings of the AI 2002: Advances in Artificial Intelligence, 2002

2001

A Web-Based Material Requirements Planning Integrated Application.

Qiang Liao, Chen-Khong Tham, Yoke San Wong, Jianguo Wang, Chris Choy

Proceedings of the 5th International Enterprise Distributed Object Computing Conference (EDOC 2001), 2001

1997

A model-based online control of optimal fixturing process.

Yifa Wang, Jerry Y. H. Fuh, Yoke San Wong

Proceedings of the 1997 IEEE International Conference on Robotics and Automation, 1997