Xuesong Mei
Orcid: 0000-0001-6505-2774
According to our database1,
Xuesong Mei
authored at least 66 papers
between 2007 and 2025.
Collaborative distances:
Collaborative distances:
Timeline
Legend:
Book In proceedings Article PhD thesis Dataset OtherLinks
On csauthors.net:
Bibliography
2025
Robotics Comput. Integr. Manuf., 2025
2024
Digital Twin-Enabled Health Prognostics for Smart Manufacturing Systems Under Uncertain Operating Conditions.
IEEE Trans. Ind. Informatics, December, 2024
Reconfigurable Battery System-Based Hybrid Self-Heating Method for Low Temperature Applications.
IEEE Trans. Ind. Informatics, November, 2024
Multi-Contact Cartesian Null-Space Impedance Control for the Anthropomorphic Manipulator Without Knowledge of Force Locations.
IEEE Robotics Autom. Lett., November, 2024
IEEE Robotics Autom. Lett., October, 2024
IEEE Robotics Autom. Lett., June, 2024
Robotics Comput. Integr. Manuf., April, 2024
Disturbance Observer-Based Adaptive Neural Control of the Permanent Magnet Linear Motor System With Unknown Backlash-Like Hysteresis.
IEEE Trans. Ind. Informatics, March, 2024
A Novel Fuzzy Echo State Broad Learning System for Surface Roughness Virtual Metrology.
IEEE Trans. Ind. Informatics, March, 2024
Fine Thermal Control Based on Multilayer Temperature Distribution for Lithium-Ion Batteries.
IEEE Trans. Ind. Informatics, March, 2024
A tabu memory based iterated greedy algorithm for the distributed heterogeneous permutation flowshop scheduling problem with the total tardiness criterion.
Expert Syst. Appl., March, 2024
J. Intell. Manuf., January, 2024
A quality improvement method for complex component fine manufacturing based on terminal laser beam deflection compensation.
J. Intell. Manuf., January, 2024
Adaptive neural sliding mode control of an uncertain permanent magnet linear motor system with unknown input backlash in laser processing.
Inf. Sci., 2024
Modeling and compensation of small-sample thermal error in precision machine tool spindles using spatial-temporal feature interaction fusion network.
Adv. Eng. Informatics, 2024
Hardware Assisted Full Time Synchronization of EtherCAT Network with Cable Redundancy.
Proceedings of the 14th IEEE International Symposium on Industrial Embedded Systems, 2024
S<sup>2</sup>NeRF: Neural Radiance Fields Training with Sparse Points and Sparse Views.
Proceedings of the Intelligent Robotics and Applications - 17th International Conference, 2024
Proceedings of the Intelligent Robotics and Applications - 17th International Conference, 2024
StereoNeRF: Learning Radiance Fields from Stereo Observation for Driving View Synthesis.
Proceedings of the Intelligent Robotics and Applications - 17th International Conference, 2024
Multi-population for Multi-objective Genetic Algorithm with Adaptive Information Sharing Strategy for Berth Allocation and Quay Crane Assignment Problems.
Proceedings of the Genetic and Evolutionary Computation Conference Companion, 2024
2023
Collision-Free Motion Generation Based on Stochastic Optimization and Composite Signed Distance Field Networks of Articulated Robot.
IEEE Robotics Autom. Lett., November, 2023
IEEE Trans. Ind. Informatics, October, 2023
Material Removal Rate Prediction Based on Broad Echo State Learning System for Magnetically Driven Internal Finishing.
IEEE Trans. Ind. Informatics, May, 2023
Real-Time Monitoring and Control of the Breakthrough Stage in Ultrafast Laser Drilling Based on Sequential Three-Way Decision.
IEEE Trans. Ind. Informatics, April, 2023
Shape regulation of tapered microchannels in silica glass ablated by femtosecond laser with theoretical modeling and machine learning.
J. Intell. Manuf., 2023
2022
Broad Learning System Based on Binary Grey Wolf Optimization for Surface Roughness Prediction in Slot Milling.
IEEE Trans. Instrum. Meas., 2022
A Novel Method for Measuring, Collimating, and Maintaining the Spatial Pose of Terminal Beam in Laser Processing System Based on 3D and 2D Hybrid Vision.
IEEE Trans. Ind. Electron., 2022
IEEE Trans. Ind. Electron., 2022
Inductance Analysis of Two-Phase Winding Segmented Permanent Magnet Linear Synchronous Motor.
Symmetry, 2022
Research on Detent Force Characteristics of Winding Segmented Permanent Magnet Linear Synchronous Motor Based on Analytical Model.
Symmetry, 2022
Assembly quality evaluation for linear axis of machine tool using data-driven modeling approach.
J. Intell. Manuf., 2022
An on-machine tool path generation method based on hybrid and local point cloud registration for laser deburring of ceramic cores.
J. Intell. Manuf., 2022
Microservices-based cloud-edge collaborative condition monitoring platform for smart manufacturing systems.
Int. J. Prod. Res., 2022
SVM-Based Optimizing Control of Two-Phase Winding Segmented Permanent Magnet Linear Synchronous Motor.
IEEE Access, 2022
2021
Erratum to "Remaining Useful Life Prediction of Ball Screw Using Precision Indicator".
IEEE Trans. Instrum. Meas., 2021
IEEE Trans. Instrum. Meas., 2021
IEEE Trans. Ind. Informatics, 2021
A Relative State of Health Estimation Method Based on Wavelet Analysis for Lithium-Ion Battery Cells.
IEEE Trans. Ind. Electron., 2021
Optimized Impedance Adaptation of Robot Manipulator Interacting With Unknown Environment.
IEEE Trans. Control. Syst. Technol., 2021
Realization of Force Detection and Feedback Control for Slave Manipulator of Master/Slave Surgical Robot.
Sensors, 2021
A newly developed corner smoothing methodology based on clothoid splines for high speed machine tools.
Robotics Comput. Integr. Manuf., 2021
Deep reinforcement learning for permanent magnet synchronous motor speed control systems.
Neural Comput. Appl., 2021
J. Intell. Robotic Syst., 2021
Cloud-Manufacturing-Based Condition Monitoring Platform With 5G and Standard Information Model.
IEEE Internet Things J., 2021
IEEE Access, 2021
2020
An Online and Vision-Based Method for Fixtured Pose Measurement of Nondatum Complex Component.
IEEE Trans. Instrum. Meas., 2020
Assembly consistency improvement of straightness error of the linear axis based on the consistency degree and GA-MSVM-I-KM.
J. Intell. Manuf., 2020
A Novel Local Smoothing Method for Five-Axis Machining With Time-Synchronization Feedrate Scheduling.
IEEE Access, 2020
A Novel Condition Monitoring Signal Analysis Method of Numerical Control Machine Tools in Varying Duty Operation.
IEEE Access, 2020
2019
End-Effector Force Estimation for Flexible-Joint Robots With Global Friction Approximation Using Neural Networks.
IEEE Trans. Ind. Informatics, 2019
Orderings of a class of trees with respect to the Merrifield-Simmons index and the Hosoya index.
J. Comb. Optim., 2019
Multi-point Interaction Force Estimation for Robot Manipulators with Flexible Joints Using Joint Torque Sensors.
Proceedings of the Intelligent Robotics and Applications - 12th International Conference, 2019
Straightness Error Assessment Model of the Linear Axis of Machine Tool Based on Data-Driven Method.
Proceedings of the Intelligent Robotics and Applications - 12th International Conference, 2019
Effects of Image Augmentation and Dual-layer Transfer Machine Learning Architecture on Tumor Classification.
Proceedings of the ICCPR '19: 8th International Conference on Computing and Pattern Recognition, 2019
2017
Dynamic modeling of robot based on neural network with incomplete state observations.
Proceedings of the 2017 IEEE International Conference on Robotics and Biomimetics, 2017
Proceedings of the 24th International Conference on Mechatronics and Machine Vision in Practice, 2017
Design and performance analysis of high response actuator using magnetic shape memory alloy.
Proceedings of the 24th International Conference on Mechatronics and Machine Vision in Practice, 2017
A fuzzy adaptive controller for constant cutting torque in high-performance gear hobbing process.
Proceedings of the IEEE International Conference on Advanced Intelligent Mechatronics, 2017
2014
An experimental study on energy saving potential for cutterhead drive of shield Tunneling machine using variable-speed hydraulic system.
Proceedings of the IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2014
2013
Research on the register system modeling for the four-color gravure printing machine.
Proceedings of the 10th IEEE International Conference on Control and Automation, 2013
2012
Sensors, 2012
2010
Proceedings of the 8th IEEE International Conference on Control and Automation, 2010
2009
A Simplified Systematic Method of Acquiring Design Specifications From Customer Requirements.
J. Comput. Inf. Sci. Eng., 2009
Proceedings of the 2009 International Asia Conference on Informatics in Control, 2009
2008
Proceedings of the Intelligent Robotics and Applications, First International Conference, 2008
2007
Proceedings of the IEEE International Conference on Control Applications, 2007