Weihua Cao
This page is a disambiguation page, it actually contains mutiple papers from persons of the same or a similar name.
Bibliography
2024
Time Series Anomaly Detection via Rectangular Information Granulation for Sintering Process.
IEEE Trans. Fuzzy Syst., August, 2024
Dynamic Hybrid Models With Active Sampling and Adaptive Selection of Double-Domain Features for the Tuning of Microwave Cavity Filters.
IEEE Trans. Cybern., August, 2024
Multi-fault diagnosis and fault degree identification in hydraulic systems based on fully convolutional networks and deep feature fusion.
Neural Comput. Appl., June, 2024
Soft-Sensing of Burn-Through Point Based on Weighted Kernel Just-in-Time Learning and Fuzzy Broad-Learning System in Sintering Process.
IEEE Trans. Ind. Informatics, May, 2024
Multi-working condition performance assessment based on knowledge extraction of optimal operating states for continuous annealing processes.
Int. J. Syst. Sci., April, 2024
Dynamic Optimization-Based Intelligent Control System for Drilling Rate of Penetration (ROP): Simulation and Industrial Application.
IEEE Trans. Ind. Informatics, March, 2024
Dynamic Modeling Framework Based on Automatic Identification of Operating Conditions for Sintering Carbon Consumption Prediction.
IEEE Trans. Ind. Electron., March, 2024
Multi-objective trajectory planning in the multiple strata drilling process:A bi-directional constrained co-evolutionary optimizer with Pareto front learning.
Expert Syst. Appl., March, 2024
Root Cause Identification of Industrial Alarm Floods Using Word Embedding and Few-Shot Learning.
IEEE Trans. Ind. Informatics, February, 2024
Improving Performance of Disturbance Rejection for Nonlinear Systems Using Improved Equivalent-Input-Disturbance Approach.
IEEE Trans. Ind. Informatics, January, 2024
Incident Detection Adapting to the Drilling Depth for Geological Drilling Processes Based on Domain Adversarial Dual Graph Convolutional Network.
IEEE Trans. Instrum. Meas., 2024
Drilling Process Monitoring Based on Operation Mode Recognition and Dynamic Feature Extraction.
IEEE Trans. Ind. Electron., 2024
Polynomial verification for safe codiagnosability of decentralized fuzzy discrete-event systems.
Fuzzy Sets Syst., 2024
Fuzzy Sets Syst., 2024
Proceedings of the IEEE International Conference on Industrial Technology, 2024
2023
Appl. Soft Comput., November, 2023
Statistical Evaluation of the Performance of Gridded Daily Precipitation Products from Reanalysis Data, Satellite Estimates, and Merged Analyses over Global Land.
Remote. Sens., September, 2023
J. Adv. Comput. Intell. Intell. Informatics, July, 2023
Inf. Sci., July, 2023
An Improved Dynamic Optimization Control System for the Drilling Rate of Penetration (ROP) and Its Industrial Application.
IEEE Trans. Ind. Electron., June, 2023
Identification of downhole conditions in geological drilling processes based on quantitative trends and expert rules.
Neural Comput. Appl., June, 2023
A Novel Rate of Penetration Model Based on Support Vector Regression and Modified Bat Algorithm.
IEEE Trans. Ind. Informatics, May, 2023
IEEE Trans. Circuits Syst. II Express Briefs, February, 2023
The Influence of FY-4A High-Frequency LST Data on Data Assimilation in a Climate Model.
Remote. Sens., January, 2023
Efficient Facial Expression Recognition With Representation Reinforcement Network and Transfer Self-Training for Human-Machine Interaction.
IEEE Trans. Ind. Informatics, 2023
Analysis and Design of Active Disturbance Rejection Control With an Improved Extended State Observer for Systems With Measurement Noise.
IEEE Trans. Ind. Electron., 2023
Analysis and robust control of system with uncertainty and disturbance using equivalent-input-disturbance approach.
J. Frankl. Inst., 2023
Improved Bottleneck Bandwidth and Round-Trip Propagation Congestion Control Algorithm for Round-Trip Time Fairness.
J. Adv. Comput. Intell. Intell. Informatics, 2023
Anomaly Detection and Alarm Limit Design for In-Hole Bit Bounce Based on Interval Augmented Mahalanobis Distance.
Proceedings of the International Conference on Neural Computing for Advanced Applications, 2023
Bit Bounce Detection for Drilling Process Based on Multi-Feature Graph and Graph Convolutional Network.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023
Blast Furnace Gas Utilization Rate Prediction Model based on Northern Goshawk Optimization and Long Short-Term Memory in Massive Data Set.
Proceedings of the 6th IEEE International Conference on Industrial Cyber-Physical Systems, 2023
Similarity Analysis of Industrial Alarm Floods Based on Word Embedding and Move-Split-Merge Distance.
Proceedings of the 6th IEEE International Conference on Industrial Cyber-Physical Systems, 2023
Prediction of Silicon Content in Molten Iron of Blast Furnace Based on Multi-dimensional Sequential Characteristic Reconstruction.
Proceedings of the 6th IEEE International Conference on Industrial Cyber-Physical Systems, 2023
Reinforcement Learning with Reward Shaping and Hybrid Exploration in Sparse Reward Scenes.
Proceedings of the 6th IEEE International Conference on Industrial Cyber-Physical Systems, 2023
Proceedings of the CAA Symposium on Fault Detection, 2023
Design and implementation of a new generation graph & model & data offline maintenance platform.
Proceedings of the 2023 4th International Conference on Big Data Economy and Information Management, 2023
2022
Disturbance Rejection and Predictive Control for Systems With Input and Output Delays.
IEEE Trans. Syst. Man Cybern. Syst., 2022
Tube-Based Adaptive Model Predictive Control for Deviation Correction in Vertical Drilling Process.
IEEE Trans. Ind. Electron., 2022
Hybrid Intelligent Control Based on Condition Identification for Combustion Process in Heating Furnace of Compact Strip Production.
IEEE Trans. Ind. Electron., 2022
Information Granulation With Rectangular Information Granules and Its Application in Time-Series Similarity Measurement.
IEEE Trans. Fuzzy Syst., 2022
A Dynamic-Attention-Based Heuristic Fuzzy Expert System for the Tuning of Microwave Cavity Filters.
IEEE Trans. Fuzzy Syst., 2022
Operating Performance Improvement Based on Prediction and Grade Assessment for Sintering Process.
IEEE Trans. Cybern., 2022
Disturbance Rejection and Robustness of Improved Equivalent-Input-Disturbance-Based System.
IEEE Trans. Cybern., 2022
Decentralized Failure Prognosis of Stochastic Discrete-Event Systems and a Test Algorithm.
IEEE Trans Autom. Sci. Eng., 2022
Neural Comput. Appl., 2022
A multi-objective optimisation algorithm for a drilling trajectory constrained to wellbore stability.
Int. J. Syst. Sci., 2022
Sci. China Inf. Sci., 2022
Appl. Soft Comput., 2022
Proceedings of the 13th Asian Control Conference, 2022
Identification and Evaluation of Blast Furnace Condition Based on Spatio-Temporal Feature Extraction.
Proceedings of the 13th Asian Control Conference, 2022
GNG-Based NSGA-III for Deviation Correction Trajectory in Vertical Geological Drilling Process.
Proceedings of the 13th Asian Control Conference, 2022
Rate of penetration prediction using hybrid Gaussian process regression model with ARD structure in geological drilling process.
Proceedings of the 13th Asian Control Conference, 2022
Axial-torsional coupled drill-string vibration analysis based on the bit-rock interaction model considering the drilling fluid factor.
Proceedings of the 13th Asian Control Conference, 2022
2021
Weight-Adapted Convolution Neural Network for Facial Expression Recognition in Human-Robot Interaction.
IEEE Trans. Syst. Man Cybern. Syst., 2021
Speech Personality Recognition Based on Annotation Classification Using Log-Likelihood Distance and Extraction of Essential Audio Features.
IEEE Trans. Multim., 2021
Abnormality Detection for Drilling Processes Based on Jensen-Shannon Divergence and Adaptive Alarm Limits.
IEEE Trans. Ind. Informatics, 2021
Intelligent Tuning of Microwave Cavity Filters Using Granular Multi-Swarm Particle Swarm Optimization.
IEEE Trans. Ind. Electron., 2021
Modeling and Control of Drill-String System With Stick-Slip Vibrations Using LPV Technique.
IEEE Trans. Control. Syst. Technol., 2021
The Quantile-Matching Approach to Improving Radar Quantitative Precipitation Estimation in South China.
Remote. Sens., 2021
Robust mixed-sensitivity H∞ control of weight on bit in geological drilling process with parameter uncertainty.
J. Frankl. Inst., 2021
Intelligent Compensating Method for MPC-Based Deviation Correction with Stratum Uncertainty in Vertical Drilling Process.
J. Adv. Comput. Intell. Intell. Informatics, 2021
Speech emotion recognition based on formant characteristics feature extraction and phoneme type convergence.
Inf. Sci., 2021
Discrimination and correction of abnormal data for condition monitoring of drilling process.
Neurocomputing, 2021
Semi-supervised support vector regression based on data similarity and its application to rock-mechanics parameters estimation.
Eng. Appl. Artif. Intell., 2021
An operating performance assessment strategy with multiple modes based on least squares support vector machines for drilling process.
Comput. Ind. Eng., 2021
Modeling and coordinated optimization method featuring coupling relationship among subsystems for improving safety and efficiency of drilling process.
Appl. Soft Comput., 2021
Eye state detection based on Weight Binarization Convolution Neural Network and Transfer Learning.
Appl. Soft Comput., 2021
Multi-objective drilling trajectory optimization using decomposition method with minimum fuzzy entropy-based comprehensive evaluation.
Appl. Soft Comput., 2021
A New Total Variation Denoising Algorithm for Piecewise Constant Signals Based on Non-convex Penalty.
Proceedings of the Neural Computing for Advanced Applications, 2021
Highest Wellbore Stability Obstacle Avoidance Drilling Trajectory Optimization in Complex Multiple Strata Geological Environment.
Proceedings of the IECON 2021, 2021
Performance Assessment Index in Continuous Annealing Processes by Extracting Reference Curve of Operating Modes.
Proceedings of the 4th IEEE International Conference on Industrial Cyber-Physical Systems, 2021
Discussion on Integrated Modeling Technology of New Generation Centralized Control Station Equipment Monitoring System.
Proceedings of CECNet 2021, 2021
Proceedings of the CAA Symposium on Fault Detection, 2021
2020
A New Hybrid Bat Algorithm and its Application to the ROP Optimization in Drilling Processes.
IEEE Trans. Ind. Informatics, 2020
A Fuzzy Control Strategy of Burn-Through Point Based on the Feature Extraction of Time-Series Trend for Iron Ore Sintering Process.
IEEE Trans. Ind. Informatics, 2020
Disturbance Rejection for Input-Delay System Using Observer-Predictor-Based Output Feedback Control.
IEEE Trans. Ind. Informatics, 2020
Improve Disturbance-Rejection Performance for an Equivalent-Input-Disturbance-Based Control System by Incorporating a Proportional-Integral Observer.
IEEE Trans. Ind. Electron., 2020
An Intelligent Control Strategy for Iron Ore Sintering Ignition Process Based on the Prediction of Ignition Temperature.
IEEE Trans. Ind. Electron., 2020
Disturbance Rejection and Control System Design Using Improved Equivalent Input Disturbance Approach.
IEEE Trans. Ind. Electron., 2020
Intelligent Integrated Control for Burn-Through Point to Carbon Efficiency Optimization in Iron Ore Sintering Process.
IEEE Trans. Control. Syst. Technol., 2020
IEEE Trans. Circuits Syst. II Express Briefs, 2020
Disturbance rejection via feedforward compensation using an enhanced equivalent-input-disturbance approach.
J. Frankl. Inst., 2020
Identification of multiple operating modes based on fused features for continuous annealing processes.
Inf. Sci., 2020
Disturbance estimator and smith predictor-based active rejection of stick-slip vibrations in drill-string systems.
Int. J. Syst. Sci., 2020
Neurocomputing, 2020
Visual-audio emotion recognition based on multi-task and ensemble learning with multiple features.
Neurocomputing, 2020
Sci. China Inf. Sci., 2020
Downhole Condition Identification for Geological Drilling Processes Based on Qualitative Trend Analysis and Expert Rules.
Proceedings of the Neural Computing for Advanced Applications, 2020
Numerical analysis of drag reduction characteristics of microtubes based on superhydrophobic properties.
Proceedings of the ISBDAI 2020, 2020
3, Springer, ISBN: 978-981-15-1144-8, 2020
2019
Electroencephalogram Emotion Recognition Based on Empirical Mode Decomposition and Optimal Feature Selection.
IEEE Trans. Cogn. Dev. Syst., 2019
An Initiative Service Method Based on Fuzzy Analytical Hierarchy Process and Context Intention Inference for Drinking Service Robot.
IEEE Trans. Cogn. Dev. Syst., 2019
J. Adv. Comput. Intell. Intell. Informatics, 2019
Combining 2D Gabor and Local Binary Pattern for Facial Expression Recognition Using Extreme Learning Machine.
J. Adv. Comput. Intell. Intell. Informatics, 2019
Hybrid modeling and online optimization strategy for improving carbon efficiency in iron ore sintering process.
Inf. Sci., 2019
Inf. Sci., 2019
Accurate fuzzy predictive models through complexity reduction based on decision of needed fuzzy rules.
Neurocomputing, 2019
An ensemble model based on weighted support vector regression and its application in annealing heating process.
Sci. China Inf. Sci., 2019
Two-level intelligent modeling method for the rate of penetration in complex geological drilling process.
Appl. Soft Comput., 2019
Proceedings of the 2019 IEEE Conference on Control Technology and Applications, 2019
Emotion Regulation Based on Multi-objective Weighted Reinforcement Learning for Human-robot Interaction.
Proceedings of the 12th Asian Control Conference, 2019
Optimal Economic Operation of Microgrid Considering Lifetime Characteristics for Hybrid Energy Storage System.
Proceedings of the 12th Asian Control Conference, 2019
A novel online learning RECOC-KFDA method for lithologic identification in drilling process.
Proceedings of the 12th Asian Control Conference, 2019
2018
Trans. Inst. Meas. Control, 2018
A Multilevel Prediction Model of Carbon Efficiency Based on the Differential Evolution Algorithm for the Iron Ore Sintering Process.
IEEE Trans. Ind. Electron., 2018
J. Adv. Comput. Intell. Intell. Informatics, 2018
Torsional vibration control of drill-string systems with time-varying measurement delays.
Inf. Sci., 2018
A dynamic subspace model for predicting burn-through point in iron sintering process.
Inf. Sci., 2018
Optimization of coke ratio for the second proportioning phase in a sintering process base on a model of temperature field of material layer.
Neurocomputing, 2018
Neurocomputing, 2018
Speech emotion recognition based on feature selection and extreme learning machine decision tree.
Neurocomputing, 2018
Expert Syst. Appl., 2018
Proceedings of the 2018 International Conference on Security, 2018
2017
T-S Fuzzy Logic Based Modeling and Robust Control for Burning-Through Point in Sintering Process.
IEEE Trans. Ind. Electron., 2017
J. Adv. Comput. Intell. Intell. Informatics, 2017
J. Adv. Comput. Intell. Intell. Informatics, 2017
Intelligent Coordinating Control Between Burn-Through Point and Mixture Bunker Level in an Iron Ore Sintering Process.
J. Adv. Comput. Intell. Intell. Informatics, 2017
IEEE CAA J. Autom. Sinica, 2017
CAAI Trans. Intell. Technol., 2017
An initiative service method based on intention understanding for drinking service robot.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017
A GA-SVM and D-S evidence theory based method for shunt-fault diagnosis in power systems.
Proceedings of the 11th Asian Control Conference, 2017
Nesterov accelerated gradient descent-based convolution neural network with dropout for facial expression recognition.
Proceedings of the 11th Asian Control Conference, 2017
Downhole-friction-estimation-based rotary speed control for drillstring system with stick-slip vibrations.
Proceedings of the 11th Asian Control Conference, 2017
Proceedings of the 11th Asian Control Conference, 2017
A stick-slip vibration suppression method for the drillstring system based on neutral type model.
Proceedings of the 11th Asian Control Conference, 2017
2016
J. Adv. Comput. Intell. Intell. Informatics, 2016
Intelligent Nadaboost-ELM Modeling Method for Formation Drillability Using Well Logging Data.
J. Adv. Comput. Intell. Intell. Informatics, 2016
Sliding Mode MPPT Controller for Photovoltaic Systems Under Partial Shading Conditions.
J. Adv. Comput. Intell. Intell. Informatics, 2016
J. Adv. Comput. Intell. Intell. Informatics, 2016
Disturbance rejection in nonlinear systems based on equivalent-input-disturbance approach.
Appl. Math. Comput., 2016
2015
Modeling of High Temperature Gas Flow 3D Distribution in BF Throat Based on the Computational Fluid Dynamics.
J. Adv. Comput. Intell. Intell. Informatics, 2015
2014
IEEE Trans. Control. Syst. Technol., 2014
2013
Optimal tracking agent: a new framework of reinforcement learning for multiagent systems.
Concurr. Comput. Pract. Exp., 2013
Proceedings of the International Conference on Internet Multimedia Computing and Service, 2013
2012
An intelligent control system based on prediction of the burn-through point for the sintering process of an iron and steel plant.
Expert Syst. Appl., 2012
2011
Proceedings of the IEEE 10th International Conference on Trust, 2011
Disturbance rejection in repetitive-control systems based on equivalent-input-disturbance approach.
Proceedings of the 50th IEEE Conference on Decision and Control and European Control Conference, 2011
Simulation based evaluation and optimization for energy consumption of a typical welding shop.
Proceedings of the IEEE Conference on Automation Science and Engineering, 2011
Voiceprint-biometric template design and authentication based on cloud computing security.
Proceedings of the 2011 International Conference on Cloud and Service Computing, 2011
2010
Proceedings of the Global Communications Conference, 2010
2009
Intelligent Decoupling Control of Gas Collection Process of Multiple Asymmetric Coke Ovens.
IEEE Trans. Ind. Electron., 2009
IEEE Trans. Control. Syst. Technol., 2009
2005
J. Adv. Comput. Intell. Intell. Informatics, 2005