Wei-Hsin Liao

Orcid: 0000-0001-7221-5906

According to our database1, Wei-Hsin Liao authored at least 48 papers between 2001 and 2024.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2024
Enhancing the Output Performance of Energy Harvesters Using Hierarchical Auxetic Structure and Optimization Techniques.
IEEE Trans. Ind. Electron., September, 2024

An Ultralow Frequency Energy Harvester With an Asymmetric-Stiffness Pendulum Inspired by Biological Grooming Behavior.
IEEE Internet Things J., July, 2024

Self-Powered Wireless Condition Monitoring for Rotating Machinery.
IEEE Internet Things J., January, 2024

Design, Control, and Validation of a Novel Cable-Driven Series Elastic Actuation System for a Flexible and Portable Back-Support Exoskeleton.
IEEE Trans. Robotics, 2024

Deep Reinforcement Learning Based Toolpath Generation for Thermal Uniformity in Laser Powder Bed Fusion Process.
CoRR, 2024

Demo Abstract: A Battery-free Wireless Keyboard.
Proceedings of the 23rd ACM/IEEE International Conference on Information Processing in Sensor Networks, 2024

A smart wearable device for capturing biomechanical energy from human knee motion.
Proceedings of the IEEE International Conference on Advanced Intelligent Mechatronics, 2024

2023
Wearable multisource quantitative gait analysis of Parkinson's diseases.
Comput. Biol. Medicine, September, 2023

Event-Triggered Sliding Mode Impulsive Control for Lower Limb Rehabilitation Exoskeleton Robot Gait Tracking.
Symmetry, 2023

A Coaxial Wrist-Worn Energy Harvester for Self-Powered Internet of Things Sensors.
IEEE Internet Things J., 2023

2022
Gait Synergy Analysis and Modeling on Amputees and Stroke Patients for Lower Limb Assistive Devices.
Sensors, 2022

Severity level diagnosis of Parkinson's disease by ensemble K-nearest neighbor under imbalanced data.
Expert Syst. Appl., 2022

2021
High-Power Density Inertial Energy Harvester Without Additional Proof Mass for Wearables.
IEEE Internet Things J., 2021

Field-Based Toolpath Generation for 3D Printing Continuous Fibre Reinforced Thermoplastic Composites.
CoRR, 2021

Accurate identification of Parkinson's disease by distinctive features and ensemble decision trees.
Biomed. Signal Process. Control., 2021

2020
Optimization Algorithm-Based Approach for Modelling Large Deflection of Cantilever Beam Subjected to Tip Load.
CoRR, 2020

2019
Self-Powered Smart Insole for Monitoring Human Gait Signals.
Sensors, 2019

Reference Joint Trajectories Generation of CUHK-EXO Exoskeleton for System Balance in Walking Assistance.
IEEE Access, 2019

Trajectory Tracking for Swing Phase of the Lower Limb Exoskeleton.
Proceedings of the 2019 IEEE International Conference on Robotics and Biomimetics, 2019

Motion Adaption and Trajectory Generation of Stair Ascent and Descent with a Lower Limb Exoskeleton for Paraplegics.
Proceedings of the IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2019

2018
Online Adaptive and LSTM-Based Trajectory Generation of Lower Limb Exoskeletons for Stroke Rehabilitation.
Proceedings of the IEEE International Conference on Robotics and Biomimetics, 2018

Lower Limb Exoskeleton Control via Linear Quadratic Regulator and Disturbance Observer.
Proceedings of the IEEE International Conference on Robotics and Biomimetics, 2018

2017
Multivariate Multiscale Symbolic Entropy Analysis of Human Gait Signals.
Entropy, 2017

Motion planning of lower limb exoskeleton with passive ankle for paraplegics.
Proceedings of the 2017 IEEE International Conference on Robotics and Biomimetics, 2017

2016
A new powered ankle-foot prosthesis with compact parallel spring mechanism.
Proceedings of the 2016 IEEE International Conference on Robotics and Biomimetics, 2016

2015
Design of a lower extremity exoskeleton for motion assistance in paralyzed individuals.
Proceedings of the 2015 IEEE International Conference on Robotics and Biomimetics, 2015

Insole plantar pressure systems in the gait analysis of post-stroke rehabilitation.
Proceedings of the IEEE International Conference on Information and Automation, 2015

2014
Design and analysis of a regenerative magnetorheological actuator for gait assistance in knee joint.
Proceedings of the 2014 IEEE International Conference on Robotics and Biomimetics, 2014

Human level walking gait modeling and analysis based on semi-Markov process.
Proceedings of the 2014 IEEE International Conference on Robotics and Automation, 2014

Design considerations in medium-power biomechanical energy harvesting circuits.
Proceedings of the IEEE International Conference on Information and Automation, 2014

2013
HIP-KNEE control for gait assistance with Powered Knee Orthosis.
Proceedings of the IEEE International Conference on Robotics and Biomimetics, 2013

Design and control of a powered knee orthosis for gait assistance.
Proceedings of the 2013 IEEE/ASME International Conference on Advanced Intelligent Mechatronics, 2013

2012
Improved Design and Analysis of Self-Powered Synchronized Switch Interface Circuit for Piezoelectric Energy Harvesting Systems.
IEEE Trans. Ind. Electron., 2012

Generalized Simulation Model for a Switched-Mode Power Supply Design Course Using MATLAB/SIMULINK.
IEEE Trans. Educ., 2012

Temporal gait parameters captured by Surface Electromyography measurement.
Proceedings of the 2012 IEEE International Conference on Robotics and Biomimetics, 2012

2011
Steady-State Simulation and Optimization of Class-E Power Amplifiers With Extended Impedance Method.
IEEE Trans. Circuits Syst. I Regul. Pap., 2011

Gait analysis for designing a new assistive knee brace.
Proceedings of the 2011 IEEE International Conference on Robotics and Biomimetics, 2011

2010
Experimental evaluation of an assistive knee brace with magnetorheological actuator.
Proceedings of the 2010 IEEE International Conference on Robotics and Biomimetics, 2010

2009
Magnetorheological fluids based multifunctional actuator for assistive knee braces.
Proceedings of the IEEE International Conference on Robotics and Biomimetics, 2009

Simulation and Optimization of Class-E Power Amplifiers with Extended Impedance Method.
Proceedings of the International Symposium on Circuits and Systems (ISCAS 2009), 2009

2008
Design and testing of assistive knee brace with magnetorheological actuator.
Proceedings of the IEEE International Conference on Robotics and Biomimetics, 2008

2007
Design and control of a Magnetorheological actuator for leg exoskeleton.
Proceedings of the IEEE International Conference on Robotics and Biomimetics, 2007

2006
Wireless transmission for health monitoring of large structures.
IEEE Trans. Instrum. Meas., 2006

A Leg Exoskeleton Utilizing a Magnetorheological Actuator.
Proceedings of the IEEE International Conference on Robotics and Biomimetics, 2006

2005
Adaptive body fitness equipment using magnetorheological fluids.
Proceedings of the IEEE International Conference on Robotics and Biomimetics, 2005

2004
A Snake Robot Using Shape Memory Alloys.
Proceedings of the 2004 IEEE International Conference on Robotics and Biomimetics, 2004

2003
Location and coverage of enhanced self-sensing piezoelectric actuators for active-passive hybrid vibration control of beam structures.
Proceedings of the 42nd IEEE Conference on Decision and Control, 2003

2001
Neural Netwrok Modeling and Controllers for Megnetorheological Fluid Dampers.
Proceedings of the 10th IEEE International Conference on Fuzzy Systems, 2001


  Loading...