Tohru Ishida

According to our database, Tohru Ishida authored at least 12 papers between 2008 and 2023.

Collaborative distances:

• Dijkstra number of five.
• Erdős number of five.

2023

Effects of Bit Shape of Electroplated Diamond Tool Used for Drilling Small Diameter Holes in Glass Plate on Machining Fluid Flow and Chip Discharge.

Tappei Oyamada, Akira Mizobuchi, Tohru Ishida

Int. J. Autom. Technol., January, 2023

2022

Polishing Performance of a Recycled Grinding Wheel Using Grinding Wheel Scraps for the Wet Polishing of Stainless-Steel Sheets.

Akira Mizobuchi, Takeshi Hamada, Atsuyoshi Tashima, Keita Horimoto, Tohru Ishida

Int. J. Autom. Technol., 2022

2018

Editorial: Progress of Manufacturing Technology.

Keiji Yamada, Kazuhito Ohashi, Tohru Ishida, Tadanori Sugino

Int. J. Autom. Technol., 2018

2016

Miniature Drilling of Chemically Strengthened Glass Plate Using Electroplated Diamond Tool.

Akira Mizobuchi, Yuki Kagawa, Tohru Ishida

Int. J. Autom. Technol., 2016

2014

Fundamental Study on Hole Fabrication Inside a Hole by Means of Electrical Discharge Machining.

Tohru Ishida, Yuichi Okahara, Masahiko Kita, Akira Mizobuchi, Keiichi Nakamoto, Yoshimi Takeuchi

Int. J. Autom. Technol., 2014

2013

Restraint of Thermal Crack on Rake Face of Cermet Tool in Intermittent Cutting.

Akira Mizobuchi, Masahiro Masuda, Teruo Nogami, Hitoshi Ogawa, Tohru Ishida

Int. J. Autom. Technol., 2013

2010

Interactive Design-Assistance System of Machine Tool Structure in Conceptual and Fundamental Design Stage.

Zhangyong Yu, Keiichi Nakamoto, Tohru Ishida, Yoshimi Takeuchi

Int. J. Autom. Technol., 2010

Direct Measurement of Electrode Movement During Electrical Discharge Machining by Means of Automatic Discharge Gap Controller.

Masahiko Kita, Tohru Ishida, Yoshimi Takeuchi

Int. J. Autom. Technol., 2010

Design and Implementation of Automatic Discharge Gap Controller for a Curved Hole Creating Microrobot with an Electrical Discharge Machining Function.

Tohru Ishida, Yoshimi Takeuchi

Int. J. Autom. Technol., 2010

2009

Elementary Study on the Creation of Cross Section's Changing Holes by Means of Electrical Discharge Machining.

Tohru Ishida, Yuichi Mochizuki, Yoshimi Takeuchi

Int. J. Autom. Technol., 2009

2008

Creation of U-Shaped and Skewed Holes by Means of Electrical Discharge Machining Using an Improved Electrode Curved Motion Generator.

Tohru Ishida, Yoshimi Takeuchi

Int. J. Autom. Technol., 2008

Development of an Electrode Motion Control Device for Curved Hole Electrical Discharge Machining.

Tohru Ishida, Yasuhito Miyake, Koji Teramoto, Yoshimi Takeuchi

Int. J. Autom. Technol., 2008