Thomas Keutel

Orcid: 0000-0001-8132-9294

According to our database1, Thomas Keutel authored at least 20 papers between 2012 and 2024.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2024
Correction of DC Bias in Embedded Impedance Spectroscopy Based on Excitation by DC/DC Converters for Li-Ion Batteries.
IEEE Trans. Instrum. Meas., 2024

2023
Unipolar Excitation Signal with Two Phases for Impedance Spectroscopy of Li-ion battery cells.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

2022
Real-Time Monitoring of Cables Based on Network Interface Controllers for Predictive Maintenance.
IEEE Trans. Instrum. Meas., 2022

Impedance Spectroscopy: Applications, Advances and Future Trends.
IEEE Instrum. Meas. Mag., 2022

2019
Experimental Investigation on Weather Changes Influences on Wireless Localization System.
Proceedings of the 5th IEEE International Symposium on Measurements & Networking, 2019

A Cost-Efficient and Continuous Ethernet Cable Diagnosis Technique based on Undersampling.
Proceedings of the 10th IEEE International Conference on Intelligent Data Acquisition and Advanced Computing Systems: Technology and Applications, 2019

2018
Next Generation Wireless Energy Aware Sensors for Internet of Things: A Review.
Proceedings of the 15th International Multi-Conference on Systems, Signals & Devices, 2018

2014
Simulation of Shading Effects on the power output of solar modules for enhanced efficiency in photovoltaic energy generation.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

Design of a vibration energy harvester by twin lateral magnetoelectric transducers.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

Improvement of the efficiency of MISO configuration in inductive power transmission in case of coils misalignment.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

Electrodynamic resonant energy harvester for low frequencies and amplitudes.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

Requirements for wireless sensors networks in production and logistic.
Proceedings of the IEEE 11th International Multi-Conference on Systems, Signals & Devices, 2014

Energy harvesting for wireless sensor nodes in factory environments.
Proceedings of the IEEE 11th International Multi-Conference on Systems, Signals & Devices, 2014

Modeling and simulation of magnetostriction in a twin lateral transducers energy harvester.
Proceedings of the IEEE 11th International Multi-Conference on Systems, Signals & Devices, 2014

MISO configuration efficiency in inductive power transmission for supplying wireless sensors.
Proceedings of the IEEE 11th International Multi-Conference on Systems, Signals & Devices, 2014

Adaptable electromagnetic energy harvester design for industrial implementation.
Proceedings of the IEEE 11th International Multi-Conference on Systems, Signals & Devices, 2014

2013
System Design and Energy Management for Indoor Solar Energy Harvesting Under Consideration of Spectral Characteristics of Solar Cells.
Int. J. Meas. Technol. Instrum. Eng., 2013

2012
Energy harvesting for overhead power line monitoring.
Proceedings of the International Multi-Conference on Systems, Signals & Devices, 2012

Energy profile analysis by simulation for the design of energy harvesting systems.
Proceedings of the International Multi-Conference on Systems, Signals & Devices, 2012

Application of multi-walled carbon nanotube film strain gauge on metallic surface.
Proceedings of the International Multi-Conference on Systems, Signals & Devices, 2012


  Loading...