Takeshi Mizuno

Orcid: 0000-0002-6748-9977

According to our database1, Takeshi Mizuno authored at least 56 papers between 1994 and 2024.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2024
Measuring Semantic Similarity in Japanese Key Audit Matters.
Proceedings of the 16th IIAI International Congress on Advanced Applied Informatics, 2024

Newly Designed Three-degree-of-freedom Zero-compliance Mechanism for Precise Force Measurement Using Cantilever.
Proceedings of the IEEE International Conference on Advanced Intelligent Mechatronics, 2024

2023
Effect of a Body Part Action on Body Perception of the Other Inactive Body Part.
IEEE Trans. Cogn. Dev. Syst., September, 2023

Topic Classification of Key Audit Matters in Japanese Audit Reports by Zero-shot Text Classification.
Proceedings of the 14th IIAI International Congress on Advanced Applied Informatics, 2023

2021
Vibration Isolation System with Kalman Filter Estimated Acceleration Feedback: An Approach of Negative Stiffness Control.
J. Sensors, 2021

2020
Concept and Prototype of Soft Actuator for Liquid Nitrogen Temperature Environments.
J. Robotics Mechatronics, 2020

2019
Modeling and Validation of Vertical Direction Force Estimation with a Three-Dimensional Force Measurement Instrument Based on a Zero-Compliance Mechanism.
Sensors, 2019

Force Compensation Based on Observer for Assembly of Magnetized Components.
Proceedings of the 12th Asian Control Conference, 2019

Intermediate Control for Stable Trajectory in a Relay-Feedback Mass Measurement System.
Proceedings of the 12th Asian Control Conference, 2019

Realization of Vibration Absorption at Multiple Frequencies on Vacuum Chamber with Cryopump.
Proceedings of the 12th Asian Control Conference, 2019

Stabilization of Magnetic Suspension System by using First-Order-Reset Element without Derivative Feedback.
Proceedings of the 12th Asian Control Conference, 2019

Proposal of Mass Estimation Regardless of Switching Position in a Relay Feedback Mass Measurement System.
Proceedings of the 12th Asian Control Conference, 2019

2018
Vibration Suppression in the Passively-Supported Direction by Varying Bias Currents in Magnetic Suspension System.
Proceedings of the 16th European Control Conference, 2018

2017
Editorial to the special section.
J. Syst. Control. Eng., 2017

Resonance frequency tracking control of ultrasonic transducer for diminished haptics.
Proceedings of the 11th Asian Control Conference, 2017

Realization of zero-power control in a two-degree-of-freedom double parallel magnetic suspension system.
Proceedings of the 11th Asian Control Conference, 2017

Application of phase-locked loop to mass measurement using damped dynamic vibration absorber.
Proceedings of the 11th Asian Control Conference, 2017

2016
Surface Acoustic Wave Excitation Using a Pulse Wave.
Int. J. Autom. Technol., 2016

Excitation of Surface Acoustic Wave on a Glass Substrate Using a LiNbO<sub>3</sub> Piece.
Int. J. Autom. Technol., 2016

A simple action of right index finger induces rubber hand illusion to static left hand.
Proceedings of the 2016 IEEE International Conference on Systems, Man, and Cybernetics, 2016

Force compensation for anti-collision in placing a magnetized component on ferromagnetic plate.
Proceedings of the 15th European Control Conference, 2016

2015
Improvement of vibration isolation characteristics by Kalman-filter estimated acceleration feedback.
Proceedings of the 14th European Control Conference, 2015

Realization of acceleration feedback by using an active dynamic vibration absorber as a sensor in a low-frequency region.
Proceedings of the 14th European Control Conference, 2015

Parallel-mechanism based vibration isolation system using displacement cancellation control.
Proceedings of the 10th Asian Control Conference, 2015

Comparison of zero-power controllers in double parallel magnetic suspension system with parallel connected coils.
Proceedings of the 10th Asian Control Conference, 2015

Development of non-contact carrier system using solar magnetic suspension (3ed report: Continuous 5-day and installation of sloping propulsion mechanism).
Proceedings of the 10th Asian Control Conference, 2015

2014
Effect of Nonlinearity Caused by Friction on a Negative Stiffness Control System.
IEEE Trans. Control. Syst. Technol., 2014

A New Direct Single-Molecule Observation Method for DNA Synthesis Reaction Using Fluorescent Replication Protein A.
Sensors, 2014

Zero-power control of double parallel magnetic suspension system with mixed polarity.
Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014

2013
On the simultaneous realization of virtually zero-power and zero-compliance controls.
Proceedings of the 52nd IEEE Conference on Decision and Control, 2013

2012
Stylus-Based Tele-Touch System using a Surface Acoustic Wave Tactile Display.
Int. J. Intell. Mechatronics Robotics, 2012

Study on the observability of double parallel magnetic suspension systems.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

2011
Analysis of friction-induced oscillation in negative stiffness control system.
Proceedings of the 50th IEEE Conference on Decision and Control and European Control Conference, 2011

2010
Two-Dimensional Inverted Pendulum Using Repulsive Magnetic Levitation (Bewegungsführung eines zweidimensionalen inversen Pendels mit Hilfe von Magneten).
Autom., 2010

Tactile mouse using friction control.
Proceedings of the 2010 IEEE Haptics Symposium, 2010

Study on self-sensing electrostatic suspension using a variable capacitor.
Proceedings of the 11th IEEE International Workshop on Advanced Motion Control, 2010

A 3-DOF modular vibration isolation system using zero-power magnetic suspension with adjustable negative stiffness.
Proceedings of the 11th IEEE International Workshop on Advanced Motion Control, 2010

2009
Dummy finger for surface acoustic wave tactile display -vibration characteristics-.
Proceedings of the IEEE International Conference on Robotics and Biomimetics, 2009

Pen type surface acoustic wave tactile display with movable tablet.
Proceedings of the 18th IEEE International Symposium on Robot and Human Interactive Communication, 2009

Stiffness control of magnetic suspension by local current feedback.
Proceedings of the 10th European Control Conference, 2009

2008
Pen tablet type surface acoustic wave tactile display combined with Phantom.
Proceedings of the IEEE International Conference on Robotics and Biomimetics, 2008

2007
Application of surface acoustic wave tactile display for pen tablet interface with visual information.
Proceedings of the IEEE International Conference on Robotics and Biomimetics, 2007

A Glass Substrate Transducer for Surface Acoustic Wave Tactile Display.
Proceedings of the IEEE RO-MAN 2007, 2007

2006
Proposal of Tele-touch Using Active Type SAW Tactile Display.
Proceedings of the 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2006

Two-dimensional Active Type Surface Acoustic Wave Tactile Display On a Computer Screen.
Proceedings of the 14th International Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems (HAPTICS 2006), 2006

Development of a Six-Axis Hybrid Vibration Isolation System Using Zero-Power Control.
Proceedings of the 45th IEEE Conference on Decision and Control, 2006

2005
Transparent surface acoustic wave tactile display.
Proceedings of the 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2005

A surface acoustic wave tactile display on Phantom.
Proceedings of the 2005 international conference on Augmented tele-existence, 2005

A SAW Tactile Display Using a Glass Substrate.
Proceedings of the First Joint Eurohaptics Conference and Symposium on Haptic Interfaces for Virtual Environment and Teleoperator Systems, 2005

Pneumatic Three-axis Vibration Isolation System Using Negative Stiffness.
Proceedings of the 44th IEEE IEEE Conference on Decision and Control and 8th European Control Conference Control, 2005

2004
Design of a mode-based controller for 3-DOF vibration isolation system.
Proceedings of the 2004 IEEE Conference on Robotics, Automation and Mechatronics, 2004

2003
Development of a three-axis active vibration isolation system using zero-power magnetic suspension.
Proceedings of the 42nd IEEE Conference on Decision and Control, 2003

2000
Development of a Hysteresis Amplifier with an H-bridge Drive for Self-Sensing Magnetic Suspension.
J. Robotics Mechatronics, 2000

1999
CD playback using a monolithic confocal laser coupler with a confocal knife edge (CKE) structure.
IEEE Trans. Consumer Electron., 1999

1996
Stability analysis of self-sensing magnetic bearing controllers.
IEEE Trans. Control. Syst. Technol., 1996

1994
Application of digital signal processors for industrial magnetic bearings.
IEEE Trans. Control. Syst. Technol., 1994


  Loading...