Sérgio M. A. Cruz

Orcid: 0000-0002-9651-8925

According to our database1, Sérgio M. A. Cruz authored at least 27 papers between 2008 and 2024.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2024
A Simple Magnetic-Flux-Based Method for Localizing High-Resistance Stator Ground Faults in Synchronous Machines.
IEEE Trans. Ind. Electron., May, 2024

A systematic approach to modeling synchronous generator using Markov parameters and Takagi-Sugeno fuzzy systems.
Expert Syst. Appl., January, 2024

Correction to "Online Filter Parameters Estimation in a Double Conversion UPS System for Real-Time Model Predictive Control Performance Optimization".
IEEE Access, 2024

2022
Disturbance Observer Based Predictive Current Control of Six-Phase Permanent Magnet Synchronous Machines for the Mitigation of Steady-State Errors and Current Harmonics.
IEEE Trans. Ind. Electron., 2022

Online Filter Parameters Estimation in a Double Conversion UPS System for Real-Time Model Predictive Control Performance Optimization.
IEEE Access, 2022

2021
Detection of Turn-to-Turn Faults in the Stator and Rotor of Synchronous Machines During Startup.
IEEE Trans. Ind. Electron., 2021

On the Stability of a Minimum-Loss Controlled Dual-VSI DFIG-DC System.
Proceedings of the IECON 2021, 2021

Model Predictive Control for paralleled UPS systems with load-side neutral wire.
Proceedings of the 22nd IEEE International Conference on Industrial Technology, 2021

2020
Minimum-Loss Control Strategy for a Dual-VSI DFIG DC System.
IEEE Trans. Ind. Electron., 2020

Cooperative and Dynamically Weighted Model Predictive Control of a 3-Level Uninterruptible Power Supply With Improved Performance and Dynamic Response.
IEEE Trans. Ind. Electron., 2020

Sensitivity to Parameter Mismatch in a Bi-Subspace Predictive Current Control Strategy for Six-Phase PMSM Drives.
Proceedings of the 46th Annual Conference of the IEEE Industrial Electronics Society, 2020

Open-Phase Fault Diagnosis in Six-Phase PMSM Drives Based on the Harmonics of the Measured Secondary Subspace Currents.
Proceedings of the 46th Annual Conference of the IEEE Industrial Electronics Society, 2020

2019
Broken Rotor Bar Detection in Induction Motors Based on Air-Gap Rotational Magnetic Field Measurement.
IEEE Trans. Instrum. Meas., 2019

Dynamically Weighted Optimal Switching Vector Model Predictive Control of Power Converters.
IEEE Trans. Ind. Electron., 2019

Predictive Current Control of Six-Phase Permanent Magnet Synchronous Machines with Modulated Virtual Vectors.
Proceedings of the IECON 2019, 2019

Predictive Current Control Based on Variable Amplitude Virtual Vectors for Six-Phase Permanent Magnet Synchronous Machines.
Proceedings of the IEEE International Conference on Industrial Technology, 2019

Fixed and Variable Amplitude Virtual Vectors for Model Predictive Control of Six-Phase PMSMs with Single Neutral Configuration.
Proceedings of the IEEE International Conference on Industrial Technology, 2019

2018
Predictive Torque and Rotor Flux Control of a DFIG-DC System for Torque Ripple Compensation and Loss Minimization.
IEEE Trans. Ind. Electron., 2018

Comparison of Model Predictive Control Strategies for Six-Phase Permanent Magnet Synchronous Machines.
Proceedings of the IECON 2018, 2018

Fault- Tolerant Predictive Control of a Doubly-Fed Induction Generator with Minimal Hardware Requirements.
Proceedings of the IECON 2018, 2018

2017
Predictive Stator Flux and Load Angle Control of Synchronous Reluctance Motor Drives Operating in a Wide Speed Range.
IEEE Trans. Ind. Electron., 2017

2015
Diagnosis of bearing faults in induction motors by vibration signals - Comparison of multiple signal processing approaches.
Proceedings of the 24th IEEE International Symposium on Industrial Electronics, 2015

An encoderless high-performance synchronous reluctance motor drive.
Proceedings of the IEEE International Conference on Industrial Technology, 2015

2014
Detection of stator and rotor faults in a DFIG based on the stator reactive power analysis.
Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014

2012
A New Fault Diagnosis Method and a Fault-Tolerant Switching Strategy for Matrix Converters Operating With Optimum Alesina-Venturini Modulation.
IEEE Trans. Ind. Electron., 2012

2011
Analysis and Diagnosis of Open-Circuit Faults in Matrix Converters.
IEEE Trans. Ind. Electron., 2011

2008
A New Model-Based Technique for the Diagnosis of Rotor Faults in RFOC Induction Motor Drives.
IEEE Trans. Ind. Electron., 2008


  Loading...