Satoshi Kanai

According to our database, Satoshi Kanai authored at least 37 papers between 1993 and 2024.

Collaborative distances:

• Dijkstra number of five.
• Erdős number of four.

2024

Editorial: Advanced Three-Dimensional Digital Geometry Processing.

Yukie Nagai, Satoshi Kanai

Int. J. Autom. Technol., September, 2024

Ceiling Equipment Extraction from TLS Point Clouds for Reflected Ceiling Plan Creation.

Riho Akiyama, Hiroaki Date, Satoshi Kanai, Kazushige Yasutake

Int. J. Autom. Technol., September, 2024

2022

Deep-Learning-Based Three-Dimensional Detection of Individual Wave-Dissipating Blocks from As-Built Point Clouds Measured by UAV Photogrammetry and Multibeam Echo-Sounder.

Yajun Xu, Satoshi Kanai, Hiroaki Date, Tomoaki Sano

Remote. Sens., 2022

2021

Study on Real-Time Point Cloud Superimposition on Camera Image to Assist Environmental Three-Dimensional Laser Scanning.

Kenta Ohno, Hiroaki Date, Satoshi Kanai

Int. J. Autom. Technol., 2021

2020

Hygienic Manipulation Evaluation System during Endotracheal Suctioning using Bilateral Dorsum Manus Total Travel Distance^*.

Noriyo Colley, Misuzu Nakamura, Sozo Inoue, Satoshi Kanai, Atsushi Konno, Shunsuke Komizunai, Shinji Ninomiya, Tadayoshi Asaka, Hiroki Mani, Hana Takizawa, Sarina Umesawa, Yuya Taira, Eri Murata

Proceedings of the 2020 IEEE/SICE International Symposium on System Integration, 2020

2019

An Interactive Endotracheal Suctioning Simulator Which Exhibits Vital Reactions: ESTE-SIM.

Shunsuke Komizunai, Shinji Ninomiya, Atsushi Konno, Satoshi Kanai, Tadayoshi Asaka, Eri Murata, Hiroki Mani, Nozomi Takahashi, Noriyo Colley

Int. J. Autom. Technol., 2019

Editorial: Augmented Prototyping and Fabrication for Advanced Product Design and Manufacturing.

Satoshi Kanai, Jouke C. Verlinden

Int. J. Autom. Technol., 2019

2018

Efficient Registration of Laser-Scanned Point Clouds of Bridges Using Linear Features.

Hiroaki Date, Takahito Yokoyama, Satoshi Kanai, Yoshiro Hada, Manabu Nakao, Toshiya Sugawara

Int. J. Autom. Technol., 2018

2017

Simulation-Based Evaluation of Ease of Wayfinding Using Digital Human and As-Is Environment Models.

Tsubasa Maruyama, Satoshi Kanai, Hiroaki Date, Mitsunori Tada

ISPRS Int. J. Geo Inf., 2017

TokyoTech-AIST at TRECVID 2017: Multimedia Event Detection Using Deep CNNs and Zero-Shot Classiers.

Nakamasa Inoue, Ryosuke Yamamoto, Na Rong, Satoshi Kanai, Junsuke Masada, Chihiro Shiraishi, Shi-wook Lee, Koichi Shinoda

Proceedings of the 2017 TREC Video Retrieval Evaluation, 2017

2016

Motion-capture-based walking simulation of digital human adapted to laser-scanned 3D as-is environments for accessibility evaluation.

Tsubasa Maruyama, Satoshi Kanai, Hiroaki Date, Mitsunori Tada

J. Comput. Des. Eng., 2016

Automatic registration of MLS point clouds and SfM meshes of urban area.

Reiji Yoshimura, Hiroaki Date, Satoshi Kanai, Ryohei Honma, Kazuo Oda, Tatsuya Ikeda

Geo spatial Inf. Sci., 2016

2015

MoCap-Based Adaptive Human-Like Walking Simulation in Laser-Scanned Large-Scale as-Built Environments.

Tsubasa Maruyama, Satoshi Kanai, Hiroaki Date

Proceedings of the Digital Human Modeling - Applications in Health, Safety, Ergonomics and Risk Management: Ergonomics and Health, 2015

2014

As-built modeling of piping system from terrestrial laser-scanned point clouds using normal-based region growing.

Kazuaki Kawashima, Satoshi Kanai, Hiroaki Date

J. Comput. Des. Eng., 2014

Feature-Based 3D Process Planning for MEMS Fabrication.

Satoshi Kanai, Takayuki Shibata, Takahiro Kawashima

Int. J. Autom. Technol., 2014

Editorial: CAD, CAM, and Digital Engineering.

Satoshi Kanai, Keiichi Shirase

Int. J. Autom. Technol., 2014

2013

Decomposing scanned assembly meshes based on periodicity recognition and its application to kinematic simulation modeling.

Tomohiro Mizoguchi, Satoshi Kanai

Comput. Aided Des., 2013

Anatomy-Based Variational Modeling of Digital Hand and Its Verification.

Yulai Xie, Satoshi Kanai, Hiroaki Date

Proceedings of the Digital Human Modeling and Applications in Health, Safety, Ergonomics, and Risk Management. Human Body Modeling and Ergonomics, 2013

Simulating a Walk of Digital Human Model Directly in Massive 3D Laser-Scanned Point Cloud of Indoor Environments.

Tsubasa Maruyama, Satoshi Kanai, Hiroaki Date

Proceedings of the Digital Human Modeling and Applications in Health, Safety, Ergonomics, and Risk Management. Human Body Modeling and Ergonomics, 2013

2011

An optimal delay management algorithm from passengers' viewpoints considering the whole railway network.

Satoshi Kanai, Koichi Shiina, Shingo Harada, Norio Tomii

J. Rail Transp. Plan. Manag., 2011

Parts identification and motion estimation on CT scanned assembly meshes.

Tomohiro Mizoguchi, Yoshikazu Kobayashi, Kenji Shirai, Satoshi Kanai

Proceedings of the International Conference on Computer Graphics and Interactive Techniques, 2011

2009

Database-Driven Grasp Synthesis and Ergonomic Assessment for Handheld Product Design.

Keisuke Kawaguchi, Yui Endo, Satoshi Kanai

Proceedings of the Digital Human Modeling, 2009

2007

An Integrated Environment for Testing and Assessing the Usability of Information Appliances Using Digital and Physical Mock-Ups.

Satoshi Kanai, Soh Horiuchi, Yukiaki Kikuta, Akihiko Yokoyama, Yoshiyuki Shiroma

Proceedings of the Virtual Reality, 2007

A Computer-Aided Ergonomic Assessment and Product Design System Using Digital Hands.

Yui Endo, Satoshi Kanai, Takeshi Kishinami, Natsuki Miyata, Makiko Kouchi, Masaaki Mochimaru

Proceedings of the Digital Human Modeling, 2007

2006

Segmentation of Scanned Mesh into Analytic Surfaces Based on Robust Curvature Estimation and Region Growing.

Tomohiro Mizoguchi, Hiroaki Date, Satoshi Kanai, Takeshi Kishinami

Proceedings of the Geometric Modeling and Processing, 2006

2005

High-Quality and Property Controlled Finite Element Mesh Generation From Triangular Meshes using the Multiresolution Technique.

Hiroaki Date, Satoshi Kanai, Takeshi Kishinami, Ichiro Nishigaki, Takayuki Dohi

J. Comput. Inf. Sci. Eng., 2005

A new bilateral mesh smoothing method by recognizing features.

Takafumi Shimizu, Hiroaki Date, Satoshi Kanai, Takeshi Kishinami

Proceedings of the 9th International Conference on Computer-Aided Design and Computer Graphics, 2005

Mesh simplification and adaptive LOD for finite element mesh generation.

Hiroaki Date, Satoshi Kanai, Takeshi Kishinami, Ichiro Nishigaki

Proceedings of the 9th International Conference on Computer-Aided Design and Computer Graphics, 2005

2004

Behaviour Modeller: The Systematic Generation of Statechart from Functional Relations and Scenarios for Prototyping User Interfaces.

Akihiko Urushihara, Satoshi Kanai, Takeshi Kishinami, Toyoaki Tomura

Proceedings of the Computer-Aided Design of User Interfaces IV, 2004

2003

A Cooperative Simulation Mechanism of Distributed Control Systems Based on Object-Oriented Design Pattern.

Toyoaki Tomura, Satoshi Kanai, Takeshi Kishinami

Proceedings of the 6th IEEE International Symposium on Object-Oriented Real-Time Distributed Computing (ISORC 2003), 2003

2002

Object-Oriented Design Pattern Approach to Seamless Modeling, Simulation and Implementation of Distributed Control Systems.

Satoshi Kanai, Takeshi Kishinami, Toyoaki Tomura, Kiyoshi Uehiro, Kazuhiro Ibuka, Susumu Yamamoto

Proceedings of the Knowledge and Skill Chains in Engineering and Manufacturing, 2002

2001

Developing Simulation Models of Open Distributed Control System by Using Object-Oriented Structural and Behavioral Patterns.

Toyoaki Tomura, Satoshi Kanai

Proceedings of the 4th International Symposium on Object-Oriented Real-Time Distributed Computing (ISORC 2001), 2001

Object-Oriented Design Pattern Approach for Modeling and Simulating Open Distributed Control System.

Toyoaki Tomura, Satoshi Kanai, Kiyoshi Uehiro, Susumu Yamamoto

Proceedings of the 2001 IEEE International Conference on Robotics and Automation, 2001

2000

Seamless design methodology of manufacturing cell-control software based on activity-control-condition and object diagram.

Toyoaki Tomura, Satoshi Kanai, Takeshi Kishinami

Int. J. Comput. Integr. Manuf., 2000

Object-Oriented Graphical Specification and Seamless Design Procedure for Manufacturing Cell Control Software Development.

Satoshi Kanai, Takeshi Kishinami, Toyoaki Tomura

Proceedings of the 2000 IEEE International Conference on Robotics and Automation, 2000

1997

Experimental Assessment for Examination of Curves and Surfaces by Auditory Sense.

Hidetomo Takahashi, Satoshi Kanai

J. Robotics Mechatronics, 1997

1993

Free-Form Surface Modeler with Artificial Reality.

Hidetomo Takahashi, Satoshi Kanai

J. Robotics Mechatronics, 1993