Sang-Hun Lee
This page is a disambiguation page, it actually contains mutiple papers from persons of the same or a similar name.
Bibliography
2024
A 0.6-V 4-MS/s Asynchronous SAR ADC With 2-Bit Conversion/Cycle Time-Domain Comparator.
IEEE Trans. Circuits Syst. II Express Briefs, November, 2024
Determination of optimal injection current pattern for multichannel transcranial electrical stimulation without individual MRI using multiple head models.
Comput. Methods Programs Biomed., January, 2024
Proceedings of the International Conference on Consumer Electronics - Taiwan, 2024
2023
J. Comput. Des. Eng., March, 2023
Proceedings of the HCI International 2023 Posters, 2023
2022
A 10-Bit 400-KS/s Low Noise Asynchronous SAR ADC with Dual-Domain Comparator for Input-Referred Noise Reduction.
Sensors, 2022
A novel approach for quantitative importance analysis of safety DI&C systems in the nuclear field.
Reliab. Eng. Syst. Saf., 2022
Framework to model severe accident management guidelines into Level 2 probabilistic safety assessment of a nuclear power plant.
Reliab. Eng. Syst. Saf., 2022
Exhaustive simulation approach for severe accident risk in nuclear power plants: OPR-1000 full-power internal events.
Reliab. Eng. Syst. Saf., 2022
J. Comput. Des. Eng., 2022
Proceedings of the 25th IEEE International Conference on Intelligent Transportation Systems, 2022
A 192-Gb 12-High 896-GB/s HBM3 DRAM with a TSV Auto-Calibration Scheme and Machine-Learning-Based Layout Optimization.
Proceedings of the IEEE International Solid-State Circuits Conference, 2022
The Radiographic view classification and localization of Lumbar spine using Deep Learning Models.
Proceedings of the 13th International Conference on Information and Communication Technology Convergence, 2022
2021
Silver-Assembled Silica Nanoparticles in Lateral Flow Immunoassay for Visual Inspection of Prostate-Specific Antigen.
Sensors, 2021
STPA-Based Hazard and Importance Analysis on NPP Safety I&C Systems Focusing on Human-System Interactions.
Reliab. Eng. Syst. Saf., 2021
Proceedings of the IEEE Conference on Computer Vision and Pattern Recognition Workshops, 2021
2020
Reliab. Eng. Syst. Saf., 2020
User interface for in-vehicle systems with on-wheel finger spreading gestures and head-up displays.
J. Comput. Des. Eng., 2020
Operational Vulnerability Identification Procedure for Nuclear Facilities Using STAMP/STPA.
IEEE Access, 2020
22.3 A 128Gb 8-High 512GB/s HBM2E DRAM with a Pseudo Quarter Bank Structure, Power Dispersion and an Instruction-Based At-Speed PMBIST.
Proceedings of the 2020 IEEE International Solid- State Circuits Conference, 2020
Proceedings of the 2020 IEEE/CVF Conference on Computer Vision and Pattern Recognition, 2020
2019
Wirel. Pers. Commun., 2019
Sensors, 2019
Portable and Configurable Implementation of ARINC-653 Temporal Partitioning for Small Civilian UAVs.
IEEE Access, 2019
2018
Bayesian Belief Network Model Quantification Using Distribution-Based Node Probability and Experienced Data Updates for Software Reliability Assessment.
IEEE Access, 2018
2017
Adenosine Triphosphate-Encapsulated Liposomes with Plasmonic Nanoparticles for Surface Enhanced Raman Scattering-Based Immunoassays.
Sensors, 2017
A 3D Human-Machine Integrated Design and Analysis Framework for Squat Exercises with a Smith Machine.
Sensors, 2017
Int. J. Comput. Commun. Control, 2017
Proceedings of the 2017 IEEE Conference on Computer Vision and Pattern Recognition, 2017
2016
Supporting virtualization standard for network devices in RTEMS real-time operating system.
SIGBED Rev., 2016
Corrigendum to "Reliability modeling of safety-critical network communication in a digitalized nuclear power plant" [Reliab. Eng. Syst. Saf. 144 (2015) 285-295].
Reliab. Eng. Syst. Saf., 2016
Proceedings of the International SoC Design Conference, 2016
Proceedings of the 2016 International Conference on Big Data and Smart Computing, 2016
2015
Human-Automation Interaction Design for Adaptive Cruise Control Systems of Ground Vehicles.
Sensors, 2015
Discomfort Evaluation of Truck Ingress/Egress Motions Based on Biomechanical Analysis.
Sensors, 2015
Reliability modeling of safety-critical network communication in a digitalized nuclear power plant.
Reliab. Eng. Syst. Saf., 2015
Proceedings of the 2015 IEEE Intelligent Vehicles Symposium, 2015
Proceedings of the 2015 IEEE Global Communications Conference, 2015
Proceedings of the Adjunct Proceedings of the 7th International Conference on Automotive User Interfaces and Interactive Vehicular Applications, 2015
Design of driver-vehicle interface to reduce mode confusion for adaptive cruise control systems.
Proceedings of the Adjunct Proceedings of the 7th International Conference on Automotive User Interfaces and Interactive Vehicular Applications, 2015
2014
Toward Integrated Molecular Diagnostic System ($i$ MDx): Principles and Applications.
IEEE Trans. Biomed. Eng., 2014
Preface for special issue on the 2013 Asian Conference on Design and Digital Engineering.
J. Comput. Des. Eng., 2014
Proceedings of the 2014 IEEE International Conference on Systems, Man, and Cybernetics, 2014
2013
IEEE J. Biomed. Health Informatics, 2013
Umbral Calculus And Euler Polynomials.
Ars Comb., 2013
Proceedings of the ACM/IEEE 4th International Conference on Cyber-Physical Systems (with CPS Week 2013), 2013
Proceedings of the International Winter Workshop on Brain-Computer Interface, 2013
2012
Comput. Aided Des., 2012
Simultaneous and incremental feature-based multiresolution modeling with feature operations in part design.
Comput. Aided Des., 2012
A Configurable, Extensible Implementation of Inter-Partition Communication for Integrated Modular Avionics.
Proceedings of the 2012 IEEE International Conference on Embedded and Real-Time Computing Systems and Applications, 2012
Modeling and identification of serial two-link manipulator considering joint nonlinearities for industrial robots control.
Proceedings of the 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2012
WiP Abstract: Challenges and Strategies for Exploiting Integrated Modular Avionics on Unmanned Aerial Vehicles.
Proceedings of the 2012 IEEE/ACM Third International Conference on Cyber-Physical Systems, 2012
2011
IEEE Trans. Ind. Electron., 2011
Proceedings of the IEEE 16th Conference on Emerging Technologies & Factory Automation, 2011
2010
Transformation of a thin-walled solid model into a surface model via solid deflation.
Comput. Aided Des., 2010
Development of a Novel HyRoHILS System and Its Application to Parameter Identification of an Industrial Robot.
Proceedings of the ISR/ROBOTIK 2010, Proceedings for the joint conference of ISR 2010 (41st Internationel Symposium on Robotics) und ROBOTIK 2010 (6th German Conference on Robotics), 7-9 June 2010, Munich, Germany, 2010
Development of a Robot Vision System for Measuring 3D Pose of Large Object using Virtual Plane Algorithm.
Proceedings of the ISR/ROBOTIK 2010, Proceedings for the joint conference of ISR 2010 (41st Internationel Symposium on Robotics) und ROBOTIK 2010 (6th German Conference on Robotics), 7-9 June 2010, Munich, Germany, 2010
2009
Communication Primitives for Real-Time Distributed Synchronization over Small Area Networks.
Proceedings of the 2009 IEEE International Symposium on Object/Component/Service-Oriented Real-Time Distributed Computing, 2009
2008
Real-Time Communication Support for Embedded Linux over Ethernet.
Proceedings of the 2008 International Conference on Embedded Systems & Applications, 2008
2007
IEEE Trans. Biomed. Circuits Syst., 2007
Proceedings of the 2007 IEEE International Conference on Robotics and Automation, 2007
2006
Adv. Eng. Softw., 2006
History-Based Selective Boolean Operations for Feature-Based Multi-resolution Modeling.
Proceedings of the Computational Science and Its Applications, 2006
Qualitative Method-Based the Effective Risk Mitigation Method in the Risk Management.
Proceedings of the Computational Science and Its Applications, 2006
2005
A CAD-CAE integration approach using feature-based multi-resolution and multi-abstraction modelling techniques.
Comput. Aided Des., 2005
Proceedings of the Knowledge-Based Intelligent Information and Engineering Systems, 2005
2004
Proceedings of the Parallel and Distributed Computing: Applications and Technologies, 2004
2003
VDTS: The Design of Real-Time Virus Detection and Tracing Systems.
Proceedings of the International Conference on Security and Management, 2003
The Design of WEB Stegodata Detection Systems Using Intrusion Detection Systems.
Proceedings of the International Conference on Security and Management, 2003
2001
Partial Entity Structure: A Compact Boundary Representation for Non-Manifold Geometric Modeling.
J. Comput. Inf. Sci. Eng., 2001
Partial entity structure: a compact non-manifold boundary representation based on partial topological entities.
Proceedings of the Sixth ACM Symposium on Solid Modeling and Applications, 2001
2000
A computational verification method of existence of solution for elastoplastic torsion problems with uniqueness.
Appl. Math. Lett., 2000
Proceedings of the Biologically Motivated Computer Vision, 2000
1999
Offsetting operations on non-manifold boundary representation models with simple geometry.
Proceedings of the Fifth ACM Symposium on Solid Modeling and Applications, 1999