Roque Alfredo Osornio-Rios
Orcid: 0000-0003-0868-2918
According to our database1,
Roque Alfredo Osornio-Rios
authored at least 93 papers
between 2008 and 2024.
Collaborative distances:
Collaborative distances:
Timeline
2008
2010
2012
2014
2016
2018
2020
2022
2024
0
5
10
1
3
4
7
4
3
6
3
1
2
4
7
4
6
3
2
5
4
3
3
4
3
2
1
1
3
1
1
1
1
Legend:
Book In proceedings Article PhD thesis Dataset OtherLinks
Online presence:
On csauthors.net:
Bibliography
2024
FPGA-Microprocessor Based Sensor for Faults Detection in Induction Motors Using Time-Frequency and Machine Learning Methods.
Sensors, April, 2024
Incipient Bearing Fault Signature Identification via Vibration Envelope Analysis and MUSIC.
Proceedings of the 33rd IEEE International Symposium on Industrial Electronics, 2024
Automatic Mechanical Fault Diagnosis in Induction Motors Through Thermography and Gradient Boosting.
Proceedings of the 33rd IEEE International Symposium on Industrial Electronics, 2024
2023
Power Disturbance Monitoring through Techniques for Novelty Detection on Wind Power and Photovoltaic Generation.
Sensors, March, 2023
An Entropy-Based Condition Monitoring Strategy for the Detection and Classification of Wear Levels in Gearboxes.
Entropy, March, 2023
Automatic Classification of Rotor Faults in Soft-Started Induction Motors, Based on Persistence Spectrum and Convolutional Neural Network Applied to Stray-Flux Signals.
Sensors, 2023
Automatic classification of stator asymmetries and insulation thermal damages in induction motors, applying persistence spectrum and a convolutional neural network to the stray-flux signals.
Proceedings of the 32nd IEEE International Symposium on Industrial Electronics, 2023
Thermography-Based Method for the Fault Diagnosis of Magnetite-Contaminated Rolling Bearings.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023
Detection of Stator Asymmetries in Induction Motors Through the Time-Frequency Analysis of Currents.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023
Hardware Accelerated Thermal Image Processing for the Detection of Induction Motor Faults Based on Statistical Features.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023
Deep Learning-Based Partial Transfer Fault Diagnosis Methodology for Electromechanical Systems.
Proceedings of the 28th IEEE International Conference on Emerging Technologies and Factory Automation, 2023
2022
Cutting Tool Wear Monitoring in CNC Machines Based in Spindle-Motor Stray Flux Signals.
IEEE Trans. Ind. Informatics, 2022
IEEE Trans. Ind. Informatics, 2022
Tracking of High-Order Stray-Flux Harmonics Under Starting for the Detection of Winding Asymmetries in Wound-Rotor Induction Motors.
IEEE Trans. Ind. Electron., 2022
Infrared Thermography Smart Sensor for the Condition Monitoring of Gearbox and Bearings Faults in Induction Motors.
Sensors, 2022
Detection of corrosion in ball bearings through the computation of statistical indicators of stray-flux signals.
Proceedings of the IECON 2022, 2022
Proceedings of the IECON 2022, 2022
Infrared Thermographic Image Processing for Identification of Gradual Damage to the Outer Race of Bearings in Induction Motors.
Proceedings of the IECON 2022, 2022
Diagnosis Electromechanical System by Means CNN and SAE: An Interpretable-Learning Study.
Proceedings of the 5th IEEE International Conference on Industrial Cyber-Physical Systems, 2022
2021
Methodology for Power Quality Measurement Synchronization Based on GPS Pulse-Per-Second Algorithm.
IEEE Trans. Instrum. Meas., 2021
Power Quality Disturbance Tracking Based on a Proprietary FPGA Sensor with GPS Synchronization.
Sensors, 2021
System for Tool-Wear Condition Monitoring in CNC Machines under Variations of Cutting Parameter Based on Fusion Stray Flux-Current Processing.
Sensors, 2021
Diagnosis Methodology Based on Deep Feature Learning for Fault Identification in Metallic, Hybrid and Ceramic Bearings.
Sensors, 2021
Deep-Compact-Clustering Based Anomaly Detection Applied to Electromechanical Industrial Systems.
Sensors, 2021
Expert Syst. Appl., 2021
IEEE Access, 2021
Virtual reality-based tool applied in the teaching and training of condition-based maintenance in induction motors.
Proceedings of the IECON 2021, 2021
Infrared thermography image processing for the electromechanical fault detection on the kinematic chain.
Proceedings of the IECON 2021, 2021
Proceedings of the 26th IEEE International Conference on Emerging Technologies and Factory Automation, 2021
2020
Industrial Data-Driven Monitoring Based on Incremental Learning Applied to the Detection of Novel Faults.
IEEE Trans. Ind. Informatics, 2020
Detection of Winding Asymmetries in Wound-Rotor Induction Motors via Transient Analysis of the External Magnetic Field.
IEEE Trans. Ind. Electron., 2020
Smart-Sensor for the Automatic Detection of Electromechanical Faults in Induction Motors Based on the Transient Stray Flux Analysis.
Sensors, 2020
Sensors, 2020
STFT-based induction motor stray flux analysis for the monitoring of cutting tool wearing in CNC machines.
Proceedings of the 46th Annual Conference of the IEEE Industrial Electronics Society, 2020
Proceedings of the 25th IEEE International Conference on Emerging Technologies and Factory Automation, 2020
Analysis of Machine Learning based Condition Monitoring Schemes Applied to Complex Electromechanical Systems.
Proceedings of the 25th IEEE International Conference on Emerging Technologies and Factory Automation, 2020
2019
IEEE Trans. Ind. Informatics, 2019
Methodology for filtering of depth maps based on the MCbR algorithm supported by color, shape and neighboring features.
Signal Process. Image Commun., 2019
Multiple-fault detection and identification scheme based on hierarchical self-organizing maps applied to an electric machine.
Appl. Soft Comput., 2019
Proceedings of the IECON 2019, 2019
Stray Flux Analysis for the Detection of Rotor Failures in Wound Rotor Induction Motors.
Proceedings of the IECON 2019, 2019
Condition monitoring approach based on dimensionality reduction techniques for detecting power quality disturbances in cogeneration systems.
Proceedings of the 24th IEEE International Conference on Emerging Technologies and Factory Automation, 2019
Autoencoder based feature reduction analysis applied to electromechanical systems condition monitoring.
Proceedings of the 24th IEEE International Conference on Emerging Technologies and Factory Automation, 2019
2018
Hybrid Approach Based on GA and PSO for Parameter Estimation of a Full Power Quality Disturbance Parameterized Model.
IEEE Trans. Ind. Informatics, 2018
IEEE Trans. Ind. Informatics, 2018
Guest Editorial Special Section on Thermographic Analysis Technique for Monitoring and Diagnosis in Industrial Machines and Industrial Facilities.
IEEE Trans. Ind. Informatics, 2018
Sensor Fault Diagnosis Observer for an Electric Vehicle Modeled as a Takagi-Sugeno System.
J. Sensors, 2018
Induction Motor Failure Analysis: An Automatic Methodology Based on Infrared Imaging.
IEEE Access, 2018
Methodology for Flicker Estimation and Its Correlation to Environmental Factors in Photovoltaic Generation.
IEEE Access, 2018
Proceedings of the IEEE International Conference on Industrial Technology, 2018
Incremental Learning Framework-based Condition Monitoring for Novelty Fault Identification Applied to Electromechanical Systems.
Proceedings of the 23rd IEEE International Conference on Emerging Technologies and Factory Automation, 2018
Novelty Detection based Condition Monitoring Scheme Applied to Electromechanical Systems.
Proceedings of the 23rd IEEE International Conference on Emerging Technologies and Factory Automation, 2018
2017
Supportive Noninvasive Tool for the Diagnosis of Breast Cancer Using a Thermographic Camera as Sensor.
Sensors, 2017
Neural Comput. Appl., 2017
A new method for inpainting of depth maps from time-of-flight sensors based on a modified closing by reconstruction algorithm.
J. Vis. Commun. Image Represent., 2017
2016
Self-adjustment methodology of a thermal camera for detecting faults in industrial machinery.
Proceedings of the IECON 2016, 2016
Methodology for thermal analysis of induction motors with infrared thermography considering camera location.
Proceedings of the IECON 2016, 2016
2015
Sensor Fusion for Joint Kinematic Estimation in Serial Robots Using Encoder, Accelerometer and Gyroscope.
J. Intell. Robotic Syst., 2015
2014
Detection and Classification of Single and Combined Power Quality Disturbances Using Neural Networks.
IEEE Trans. Ind. Electron., 2014
Experimental system for teaching induction motor faults during the startup transient and steady state.
Comput. Appl. Eng. Educ., 2014
Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014
2013
Reconfigurable Monitoring System for Time-Frequency Analysis on Industrial Equipment Through STFT and DWT.
IEEE Trans. Ind. Informatics, 2013
A Hilbert Transform-Based Smart Sensor for Detection, Classification, and Quantification of Power Quality Disturbances.
Sensors, 2013
FPGA-based hardware CNC interpolator of Bezier, splines, B-splines and NURBS curves for industrial applications.
Comput. Ind. Eng., 2013
FPGA-Matlab-based open core for three-time controllers in automatic control applications.
Comput. Appl. Eng. Educ., 2013
FPGA-based instantaneous estimation of unbalance/symmetrical components through the Hilbert transform.
Proceedings of the IECON 2013, 2013
2012
IEEE Trans. Instrum. Meas., 2012
An Open-Access Educational Tool for Teaching Motion Dynamics in Multi-Axis Servomotor Control.
IEEE Trans. Educ., 2012
Smart Sensor for Online Detection of Multiple-Combined Faults in VSD-Fed Induction Motors.
Sensors, 2012
Smart Sensor for Real-Time Quantification of Common Symptoms Present in Unhealthy Plants.
Sensors, 2012
A hardware-software system for coordinated multi-axis control based on a non uniform rational B-splines interpolator applied to industrial computer numerically controlled machines.
J. Syst. Control. Eng., 2012
MUSIC-ANN Analysis for Locating Structural Damages in a Truss-Type Structure by Means of Vibrations.
Comput. Aided Civ. Infrastructure Eng., 2012
Proceedings of the 2012 International Conference on Reconfigurable Computing and FPGAs, 2012
Novel methodology for improving performance of sensorless speed observers in induction motors at variable load conditions.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012
Proceedings of the 9th International Conference on Electrical Engineering, 2012
2011
FPGA-Based Online Detection of Multiple Combined Faults in Induction Motors Through Information Entropy and Fuzzy Inference.
IEEE Trans. Ind. Electron., 2011
The Application of High-Resolution Spectral Analysis for Identifying Multiple Combined Faults in Induction Motors.
IEEE Trans. Ind. Electron., 2011
FPGA-Based Smart Sensor for Online Displacement Measurements Using a Heterodyne Interferometer.
Sensors, 2011
Fused Smart Sensor Network for Multi-Axis Forward Kinematics Estimation in Industrial Robots.
Sensors, 2011
Reconfigurable FPGA-Based Unit for Singular Value Decomposition of Large m x n Matrices.
Proceedings of the 2011 International Conference on Reconfigurable Computing and FPGAs, 2011
2010
FPGA-Based Vibration Analyzer for Continuous CNC Machinery Monitoring With Fused FFT-DWT Signal Processing.
IEEE Trans. Instrum. Meas., 2010
FPGA-Based Fused Smart-Sensor for Tool-Wear Area Quantitative Estimation in CNC Machine Inserts.
Sensors, 2010
FPGA-Based Fused Smart Sensor for Dynamic and Vibration Parameter Extraction in Industrial Robot Links.
Sensors, 2010
A Field Programmable Gate Array-Based Reconfigurable Smart-Sensor Network for Wireless Monitoring of New Generation Computer Numerically Controlled Machines.
Sensors, 2010
Sensors, 2010
Open-architecture system based on a reconfigurable hardware-software multi-agent platform for CNC machines.
J. Syst. Archit., 2010
Proceedings of the ReConFig'10: 2010 International Conference on Reconfigurable Computing and FPGAs, 2010
2009
IEEE Trans. Instrum. Meas., 2009
Novel Oversampling Technique for Improving Signal-to-Quantization Noise Ratio on Accelerometer-Based Smart Jerk Sensors in CNC Applications.
Sensors, 2009
Sensors, 2009
FPGA-Based Online Induction Motor Multiple-Fault Detection with Fused FFT and Wavelet Analysis.
Proceedings of the ReConFig'09: 2009 International Conference on Reconfigurable Computing and FPGAs, 2009
2008
Proceedings of the ReConFig'08: 2008 International Conference on Reconfigurable Computing and FPGAs, 2008