Ronghai Qu
Orcid: 0000-0001-6375-0990
According to our database1,
Ronghai Qu
authored at least 70 papers
between 2007 and 2024.
Collaborative distances:
Collaborative distances:
Awards
IEEE Fellow
IEEE Fellow 2018, "For contributions to flux modulations machines and wind generators".
Timeline
2008
2010
2012
2014
2016
2018
2020
2022
2024
0
5
10
15
10
14
8
9
6
6
5
2
1
3
4
1
1
Legend:
Book In proceedings Article PhD thesis Dataset OtherLinks
Online presence:
-
on orcid.org
On csauthors.net:
Bibliography
2024
Model-Free Predictive Voltage Control of the Floating Capacitor in Hybrid-Inverter Open- Winding Permanent Magnet Synchronous Motor.
IEEE Trans. Ind. Electron., October, 2024
Simultaneous Wireless Power and Data Transfer System With Single Coil Based on Multifrequency Modulation.
IEEE Trans. Ind. Electron., June, 2024
Common-Mode Voltage Elimination of Dual Three-Phase Motor with Different Angular Displacements.
IEEE Trans. Ind. Electron., June, 2024
Torque Capacity Improvement of Flux-Switching PM Machines Based on Directional Stator Permeance Design.
IEEE Trans. Ind. Electron., May, 2024
IEEE Trans. Ind. Electron., April, 2024
Low Pole-Pair Ratio Integration Design of Permanent Magnet Vernier Machine With Improved Power Factor.
IEEE Trans. Ind. Electron., March, 2024
Analytical Torque Ripple Reduction Strategy for Flux Modulated Doubly-Salient Reluctance Motor Drives Based on ZSC Harmonic Regulation.
IEEE Trans. Ind. Electron., February, 2024
Online Multi-Parameter Observation of IPM Machine With Reconstructed Nonlinear Small-Signal Model Based on Dual EKF.
IEEE Trans. Ind. Electron., February, 2024
Hybrid Thermal Modeling with LPTN-Informed Neural Network for Multi-Node Temperature Estimation in PMSM.
Dataset, January, 2024
Rotor Eccentricity Quantitative Characterization Based on Physics-Informed Adversarial Network and Health Condition Data Only.
IEEE Trans. Ind. Electron., 2024
A Novel Variable Impedance PM Fault-Tolerant Machine for Ultrahigh-Reliability Applications.
IEEE Trans. Ind. Electron., 2024
2023
Switch Short-Circuit Fault-Tolerant Control of Five-Phase Open-Winding Motor Drive With a Floating Capacitor.
IEEE Trans. Ind. Electron., November, 2023
Feedback Linearization Direct Torque Control With Zero-Sequence Current Regulation for DC-Biased VRM Drives.
IEEE Trans. Ind. Electron., November, 2023
Novel Virtual Winding Current Controller for Suppression of Linear Permanent Magnet Machine Electromagnetic Thrust Ripple.
IEEE Trans. Ind. Electron., October, 2023
Novel Harmonic Current Controller for DC-Biased Vernier Reluctance Machines Based on Virtual Winding.
IEEE Trans. Ind. Electron., September, 2023
Improved LPTN-Based Online Temperature Prediction of Permanent Magnet Machines by Global Parameter Identification.
IEEE Trans. Ind. Electron., September, 2023
A High Power Factor Permanent Magnet Vernier Machine With Modular Stator and Yokeless Rotor.
IEEE Trans. Ind. Electron., July, 2023
Continuous Rotor Position Estimation for Flux Modulated Doubly Salient Reluctance Motor Drives Based on Back EMF Harmonics.
IEEE Trans. Ind. Electron., June, 2023
Zero-Sequence Current Suppression Method for Fault-Tolerant OW-PMSM Drive With Asymmetric Zero-Sequence Voltage Injection.
IEEE Trans. Ind. Electron., 2023
A Simplified PWM Strategy for Open-Winding Flux Modulated Doubly-Salient Reluctance Motor Drives With Switching Action Minimization.
IEEE Trans. Ind. Electron., 2023
Torque Improvement of Vernier Permanent Magnet Machine With Larger Rotor Pole Pairs Than Stator Teeth Number.
IEEE Trans. Ind. Electron., 2023
IEEE Trans. Ind. Electron., 2023
Auxiliary Circuit Free Maximum Power Efficiency Tracking Scheme for Wireless Motor System With Source-Load Coupling.
IEEE Trans. Ind. Electron., 2023
Active Power Allocation Strategy for a Novel Wireless Open-Winding Motor System With Improved Antimisalignment Capability.
IEEE Trans. Ind. Electron., 2023
Method for Predicting RUL of Rolling Bearings under Different Operating Conditions Based on Transfer Learning and Few Labeled Data.
Sensors, 2023
Design of Low-Torque-Ripple Permanent Magnet Assisted Synchronous Reluctance Machines with Mirror Asymmetric Rotors.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023
2022
Dual-Inverter PWM Scheme for DC-Biased Vernier Reluctance Machines With Reduced Switching Frequency Capable of Zero-Sequence Current Regulation.
IEEE Trans. Ind. Electron., 2022
Instantaneous Torque Modeling and Torque Ripple Reduction Strategy for Flux Modulated Doubly-Salient Reluctance Motor Drives.
IEEE Trans. Ind. Electron., 2022
Fault-Tolerant Reconfiguration Topology and Control Strategy for Symmetric Open-Winding Multiphase Machines.
IEEE Trans. Ind. Electron., 2022
Power Compensation-Oriented SVM-DPC Strategy for a Fault-Tolerant Back-to-Back Power Converter Based DFIM Shipboard Propulsion System.
IEEE Trans. Ind. Electron., 2022
An Accurate Harmonic Current Suppression Strategy for DC-Biased Vernier Reluctance Machines Based on Adaptive Notch Filter.
IEEE Trans. Ind. Electron., 2022
IEEE Trans. Ind. Electron., 2022
Correction of Field Orientation Inaccuracy Caused by Resolver Periodic Error and Rotor Time Constant Variation for Indirect Field-Oriented Control Induction Motor Drives.
IEEE Trans. Ind. Electron., 2022
Symmetrical Components Observer for LPMM Back EMF Based on Negative-Sequence Current Injection.
IEEE Trans. Ind. Electron., 2022
2021
Impedance-Based Stability Analysis of Less Power Electronics Integrated Electric Shipboard Propulsion System Considering Operation Mode, PLL, and DC-Bus Voltage Control Effect.
IEEE Trans. Veh. Technol., 2021
Direct Torque Control Strategy for DC-Biased Vernier Reluctance Machines Capable of Zero-Sequence Current Regulation.
IEEE Trans. Ind. Electron., 2021
Analysis of the Fractional Pole-Pair Linear PM Vernier Machine for Force Ripple Reduction.
IEEE Trans. Ind. Electron., 2021
A Brushless Dual-Electrical-Port Dual-Mechanical-Port Machine With Integrated Winding Configuration.
IEEE Trans. Ind. Electron., 2021
Analysis of a Spoke-Array Brushless Dual-Electrical-Port Dual-Mechanical-Port Machine With Reluctance Rotor.
IEEE Trans. Ind. Electron., 2021
Modeling and Drive Control of a Brushless Dual-Mechanical-Port Machine With Integrated Winding.
IEEE Trans. Ind. Electron., 2021
Hybrid Model for Electromagnetic Vibration Synthesis of Electrical Machines Considering Tooth Modulation and Tangential Effects.
IEEE Trans. Ind. Electron., 2021
A Novel Negative-Sequence Current Injection Method for Reducing LVPMM Electromagnetic Thrust Ripple Considering Static Longitudinal End Effect.
IEEE Trans. Ind. Electron., 2021
2020
Power Converter Topologies and Control Strategies for DC-Biased Vernier Reluctance Machines.
IEEE Trans. Ind. Electron., 2020
IEEE Trans. Ind. Electron., 2020
Electromagnetic Force and Vibration Study on Axial Flux Permanent Magnet Synchronous Machines With Dual Three-Phase Windings.
IEEE Trans. Ind. Electron., 2020
Water Cold Plates for Efficient Cooling: Verified on a Permanent-Magnet Machine With Concentrated Winding.
IEEE Trans. Ind. Electron., 2020
IEEE Access, 2020
Online Magnetization Trajectory Prediction and Current Control for a Variable-Flux Permanent Magnet Machine.
IEEE Access, 2020
2019
Analysis of Spoke-Type Brushless Dual-Electrical-Port Dual-Mechanical-Port Machine With Decoupled Windings.
IEEE Trans. Ind. Electron., 2019
Fault-Tolerant Predictive Control of Six-Phase PMSM Drives Based on Pulsewidth Modulation.
IEEE Trans. Ind. Electron., 2019
IEEE Trans. Ind. Electron., 2019
A Dynamic Multilayer Winding Thermal Model for Electrical Machines With Concentrated Windings.
IEEE Trans. Ind. Electron., 2019
Analysis, Modeling, and Current Trajectory Control of Magnetization State Manipulation in Variable-Flux Permanent Magnet Machines.
IEEE Trans. Ind. Electron., 2019
An Overview of Fault-Diagnosis and Fault-Tolerance Techniques for Switched Reluctance Machine Systems.
IEEE Access, 2019
2018
IEEE Trans. Veh. Technol., 2018
IEEE Trans. Ind. Electron., 2018
Experimental and Theoretical Research on Cogging Torque of PM Synchronous Motors Considering Manufacturing Tolerances.
IEEE Trans. Ind. Electron., 2018
Magnet-Frozen-Permeability FEA and DC-Biased Measurement for Machine Inductance: Application on a Variable-Flux PM Machine.
IEEE Trans. Ind. Electron., 2018
Maximum-Torque-per-Ampere and Magnetization-State Control of a Variable-Flux Permanent Magnet Machine.
IEEE Trans. Ind. Electron., 2018
2017
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017
Paralleled three-phase four-leg inverters for reduction of common mode current and common mode EMI.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017
Drive for DC-biased sinusoidal current vernier reluctance motors with asymmetrical power electronics devices.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017
2016
Design of a Superconducting Synchronous Generator With LTS Field Windings for 12 MW Offshore Direct-Drive Wind Turbines.
IEEE Trans. Ind. Electron., 2016
Nonsinusoidal Power Supply Analysis for Concentrated-Full-Pitch-Winding Multiphase Induction Motor.
IEEE Trans. Ind. Electron., 2016
2015
A permanent magnet traction machine with wide high efficiency range for EV application.
Proceedings of the IECON 2015, 2015
Analysis of cogging torque in surface permanent magnet machine with manufacturing tolerances.
Proceedings of the IECON 2015, 2015
Loss minimization control of vernier reluctance machines with DC field windings in stator.
Proceedings of the IECON 2015, 2015
Advanced mathematical model for surface mounted permanent magnet machines with equivalent virtual salient rotor.
Proceedings of the IECON 2015, 2015
2007
Effect of Number of Phases on Losses in Conducting Sleeves of High Speed Surface PM Machine Rotors.
Proceedings of the Conference Record of the 2007 IEEE Industry Applications Conference Forty-Second IAS Annual Meeting, 2007