Peter Göhner

According to our database, Peter Göhner authored at least 65 papers between 1979 and 2019.

Collaborative distances:

• Dijkstra number of four.
• Erdős number of three.

2019

Flexibles Framework zur Parallelisierung von simulationsbasierten Entwicklungsaufgaben in der Automatisierungstechnik.

Desirée Vögeli, Peter Göhner, Michael Weyrich

Autom., 2019

2018

Intelligent and Distributed Solving of Multiphysics Problems Coordinated by Software Agents - An Intelligent Approach for Decentralized Simulations.

Desirée Vögeli, Sebastian Grabmaier, Matthias Jüttner, Michael Weyrich, Peter Göhner, Wolfgang M. Rucker

Proceedings of the 10th International Conference on Agents and Artificial Intelligence, 2018

2017

Agentenbasierte dynamische Rekonfiguration von vernetzten intelligenten Produktionsanlagen.

Dorothea Pantförder, Felix Mayer, Christian Diedrich, Peter Göhner, Michael Weyrich, Birgit Vogel-Heuser

Proceedings of the Handbuch Industrie 4.0 Bd.2, Automatisierung., 2017

Softwareagenten zur zuverlässigen Durchführung dezentraler multiphysikalischer Simulationen.

Desirée Vögeli, Nasser Jazdi, Sebastian Grabmaier, Matthias Jüttner, Michael Weyrich, Peter Göhner, Wolfgang M. Rucker

Autom., 2017

2016

Agent-based dimensioning to support the planning of Intra-Logistics systems.

Theresa Beyer, Peter Göhner, Ramin Yousefifar, Karl-Heinz Wehking

Proceedings of the 21st IEEE International Conference on Emerging Technologies and Factory Automation, 2016

2015

Agentenbasierte Kopplung von Produktionsanlagen - Konzept für Cyber-Physische Produktionssysteme.

Birgit Vogel-Heuser, Daniel Schütz, Peter Göhner

Inform. Spektrum, 2015

Extending an intelligent medicine cabinet through the use of consumer electronic devices in order to increase the medication adherence.

Claudio E. M. Gomes, Vicente F. Lucena, Farzan Yazdi, Peter Göhner

Proceedings of the IEEE 5th International Conference on Consumer Electronics - Berlin, 2015

Fault diagnosis of automated systems using mobile devices.

Andreas Oliver Friedrich, Peter Göhner

Proceedings of the 20th IEEE Conference on Emerging Technologies & Factory Automation, 2015

Fault-based identification and inspection of fault developments to enhance availability in industrial automation systems.

Manuel Bordasch, Christian Brand, Peter Göhner

Proceedings of the 20th IEEE Conference on Emerging Technologies & Factory Automation, 2015

Knowledge-based planning and adaptation of industrial automation systems.

Theresa Beyer, Nasser Jazdi, Peter Göhner, Ramin Yousefifar

Proceedings of the 20th IEEE Conference on Emerging Technologies & Factory Automation, 2015

Flexible agent-based planning and adaptation of material handling systems.

Theresa Beyer, Ramin Yousefifar, Sebastian Abele, Manuel Bordasch, Peter Göhner, Karl-Heinz Wehking

Proceedings of the IEEE International Conference on Automation Science and Engineering, 2015

2014

Agent-Based Concepts for Manufacturing Automation.

Peter Göhner, Michael Weyrich

Proceedings of the Multiagent System Technologies - 12th German Conference, 2014

Coupling heterogeneous production systems by a multi-agent based cyber-physical production system.

Birgit Vogel-Heuser, Christian Diedrich, Dorothea Pantförder, Peter Göhner

Proceedings of the 12th IEEE International Conference on Industrial Informatics, 2014

Adaptive Human-Machine-Interface of Automation Systems.

Farzan Yazdi Motlagh, Peter Göhner

Proceedings of the Technological Innovation for Collective Awareness Systems, 2014

Improving Proceeding Test Case Prioritization with Learning Software Agents.

Sebastian Abele, Peter Göhner

Proceedings of the ICAART 2014, 2014

An educational and research cooperation between Brazil and Germany on industrial automation topics.

Vicente Ferreira de Lucena Jr., Peter Göhner, Nasser Jazdi

Proceedings of the IEEE Frontiers in Education Conference, 2014

Context-sensitive human-machine interface of automation systems: Introduction of an adaptive concept and prototype.

Farzan Yazdi, Kai Przybysz, Peter Göhner

Proceedings of the 2014 IEEE Emerging Technology and Factory Automation, 2014

2013

Konsistenzprüfung im frühen mechatronischen Entwurf.

Michael Rauscher, Peter Göhner

Autom., 2013

Systematischer Einsatz von Modellen in der Entwicklung von Automatisierungssystemen.

Mathias Maurmaier, Peter Göhner

Autom., 2013

Anforderungen an das Software-Engineering in der Automatisierungstechnik.

Birgit Vogel-Heuser, Christian Diedrich, Alexander Fay, Peter Göhner

Proceedings of the Software Engineering 2013: Fachtagung des GI-Fachbereichs Softwaretechnik, 26. Februar, 2013

Agent based control of production systems.

Arndt Lüder, Peter Göhner, Birgit Vogel-Heuser

Proceedings of the IECON 2013, 2013

Fault prevention in industrial automation systems by means of a functional model and a hybrid abnormity identification concept.

Manuel Bordasch, Peter Göhner

Proceedings of the IECON 2013, 2013

An intelligent medicine cabinet proposed to increase medication adherence.

Claudio E. M. Gomes, Vicente F. Lucena, Farzan Yazdi, Peter Göhner

Proceedings of the IEEE 15th International Conference on e-Health Networking, 2013

Voice-activated system to remotely control industrial and building automation systems using cloud computing.

Victor E. Lauria Valenzuela, Vicente F. Lucena, Payam Parvaresh, Nasser Jazdi, Peter Göhner

Proceedings of 2013 IEEE 18th Conference on Emerging Technologies & Factory Automation, 2013

Reusable hardware and software model for remote supervision of industrial Automation Systems using web technologies.

Victor E. Lauria Valenzuela, Vicente Ferreira de Lucena Jr., Nasser Jazdi, Peter Göhner

Proceedings of 2013 IEEE 18th Conference on Emerging Technologies & Factory Automation, 2013

Towards an Adaptable Mobile Agents' Management System.

Mohammad Bashir Uddin Khan, Ghada Abaza, Peter Göhner

Proceedings of the Distributed Computing and Artificial Intelligence, 2013

2012

Prioritization of Test Cases Using Software Agents and Fuzzy Logic.

Christoph Malz, Nasser Jazdi, Peter Göhner

Proceedings of the Fifth IEEE International Conference on Software Testing, 2012

User centered development of flexible user interfaces in application systems.

Farzan Yazdi Motlagh, Peter Göhner

Proceedings of the International Multi-Conference on Systems, Signals & Devices, 2012

2011

Dynamische Ermittlung der Softwarequalität zur Unterstützung der Testfallpriorisierung mit einem agentenbasierten Ansatz.

Yang Yang, Christoph Malz, Peter Göhner, Lothar Beller, Thomas Kerler

Softwaretechnik-Trends, 2011

Models for Model-Based User-Centric Energy Analysis of Industrial Automation Systems.

Andreas Beck, Peter Göhner

Proceedings of the Complex Adaptive Systems 2011 Conference, 2011

Flexible Informationsgewinnung in der Automatisierungstechnik mithilfe von Softwareagenten (Flexible Information Retrieval in Industrial Automation by Means of Software Agents).

Stephan Pech, Peter Göhner

Autom., 2011

User-Centered Design of Accessible Web and Automation Systems.

Helmut Vieritz, Farzan Yazdi, Daniel Schilberg, Peter Göhner, Sabina Jeschke

Proceedings of the Information Quality in e-Health, 2011

Agent-Based Test Case Prioritization.

Christoph Malz, Peter Göhner

Proceedings of the Fourth IEEE International Conference on Software Testing, 2011

Modeling knowledge for user-centric energy cost analysis of industrial automation systems.

Andreas Beck, Peter Göhner

Proceedings of the XXIII International Symposium on Information, 2011

A Concept for User-Centered Development of Accessible User Interfaces for Industrial Automation Systems and Web Applications.

Farzan Yazdi, Helmut Vieritz, Nasser Jazdi, Daniel Schilberg, Peter Göhner, Sabina Jeschke

Proceedings of the Universal Access in Human-Computer Interaction. Applications and Services, 2011

Consideration of Human Factors for Prioritizing Test Cases for the Software System Test.

Christoph Malz, Kerstin Sommer, Peter Göhner, Birgit Vogel-Heuser

Proceedings of the Engineering Psychology and Cognitive Ergonomics, 2011

Function allocation for multi-agent systems and middleware in industrial automation systems.

Leon Urbas, Annett Krause, Stephan Pech, Peter Göhner

Proceedings of the IEEE 16th Conference on Emerging Technologies & Factory Automation, 2011

Requirements on engineering tools for increasing reuse in industrial automation.

Camelia R. Maga, Nasser Jazdi, Peter Göhner

Proceedings of the IEEE 16th Conference on Emerging Technologies & Factory Automation, 2011

2010

Mehr Systematik für den Anlagenbau und das industrielle Lösungsgeschäft - Gesteigerte Effizienz durch Domain Engineering (Improved Systematisation in Plant Engineering and Industrial Solutions Business - Increased Efficiency through Domain Engineering).

Nasser Jazdi, Camelia R. Maga, Peter Göhner, Thomas Ehben, Thilo Tetzner, Ulrich Löwen

Autom., 2010

AmICA - A Flexible, Compact, Easy-to-Program and Low-Power WSN Platform.

Sebastian Wille, Norbert Wehn, Ivan Martinovic, Simon Kunz, Peter Göhner

Proceedings of the Mobile and Ubiquitous Systems: Computing, Networking, and Services, 2010

Einsatz von Agenten für das Selbstmanagement von Automatisierungssystemen.

Hisham Mubarak, Peter Göhner

Proceedings of the Multikonferenz Wirtschaftsinformatik, 2010

Multi-agent Information Retrieval in Heterogeneous Industrial Automation Environments.

Stephan Pech, Peter Göhner

Proceedings of the Agents and Data Mining Interaction, 2010

2009

Modellgetriebene Entwicklung von Automatisierungssystemen.

Mathias Maurmaier, Peter Göhner

Proceedings of the Dagstuhl-Workshop MBEES: Modellbasierte Entwicklung eingebetteter Systeme V, 2009

Model-driven Development in Industrial Automation - Automating the Development of Industrial Automation Systems using Model Transformations.

Mathias Maurmaier, Peter Göhner

Proceedings of the ICINCO 2009, 2009

An Agent-based Approach for Automating the Disturbance Handling for Flexible Manufacturing Systems.

Iman Badr, Peter Göhner

Proceedings of 12th IEEE International Conference on Emerging Technologies and Factory Automation, 2009

2008

Mining software code repositories and bug databases using survival analysis models.

Michael Wedel, Uwe Jensen, Peter Göhner

Proceedings of the Second International Symposium on Empirical Software Engineering and Measurement, 2008

Integrated Accessibility Models of User Interfaces for IT and Automation Systems.

Peter Göhner, Simon Kunz, Sabina Jeschke, Helmut Vieritz, Olivier Pfeiffer

Proceedings of the ISCA 21st International Conference on Computer Applications in Industry and Engineering, 2008

2007

Extending the MaSE Methodology for the Development of Embedded Real-Time Systems.

Iman Badr, Hisham Mubarak, Peter Göhner

Proceedings of the Languages, 2007

2006

Model-Driven Development of Real-Time Systems with UML 2.0 and C.

Mohammad Ullah Khan, Kurt Geihs, Felix Gutbrodt, Peter Göhner, Roland Trauter

Proceedings of the Joint Meeting of The Fourth Workshop on Model-Based Development of Computrer-Based Systems and The Third International Workshop on Model-based Methodologies for Pervasive and Embedded Software, 2006

Test and reliability challenges in automotive microelectronics.

Christian Sebeke, C. Jung, Klaus Harbich, S. Fuchs, J. Schwarz, Peter Göhner

Proceedings of the Conference on Design, Automation and Test in Europe, 2006

A Germany-Brazil Experience Report on Teaching Software Engineering for Electrical Engineering Undergraduate Students.

Vicente Ferreira de Lucena Jr., Alysson Brito, Peter Göhner

Proceedings of the 19th Conference on Software Engineering Education and Training (CSEE&T 2006), 2006

2005

Eine ganzheitliche qualitative Vorgehensweise zur Erhöhung der Zuverlässigkeit programmierbarer mechatronischer Systeme in frühen Entwicklungsphasen.

Michael Wedel, Peter Göhner

Softwaretechnik-Trends, 2005

Aufbau von Agentensystemen zur Unterstützung komponentenbasierter Entwicklungsprozesse (Architecture of Agent Systems Supporting Component-based Engineering Processes).

Thomas Wagner, Peter Göhner

it Inf. Technol., 2005

2004

Conceptual Design of an Engineering Model for Product and Plant Automation.

Katja Fischer, Peter Göhner, Felix Gutbrodt, Uwe Katzke, Birgit Vogel-Heuser

Proceedings of the Integration of Software Specification Techniques for Applications in Engineering, 2004

Reliability Considerations forMechatronic Systems on the Basis of a State Model.

Talal Arnaout, Peter Göhner, Hans-Joachim Wunderlich, Eduard Zimmer

Proceedings of the ARCS 2004, 2004

2003

Adaptive Information Exchange with Field Bus Systems.

Stephan Eberle, Peter Göhner

Proceedings of the Computational Science and Its Applications, 2003

1998

Qualitätsmanagement an einem Hochschulinstitut.

Peter Göhner

Proceedings of the Informatik und Ausbildung, GI-Fachtagung 98, 1998

1996

Building Complex Automation Systems Based on The Simulation of Object Oriented Basic Components.

Wolfgang Fleisch, Peter Göhner, Ralf Belschner, Michael Gunzert

Proceedings of the Modelling and Simulation, 1996

1991

Building IPSE's by Combining Heterogeneous CASE Tools.

Peter Göhner

Proceedings of the Software Development Environments and CASE Technology, 1991

1988

Software Reverse Engineering als Basis für eine zuverlässige Wartung und Wiederverwendung von Prozeßautomatisierungssystemen.

Peter Lempp, Peter Göhner

Proceedings of the Prozeßrechnersysteme '88, 1988

1984

Methoden zur Entwicklung von Realzeitsystemen und ihre praktische Anwendung in EPOS.

Peter Göhner

Proceedings of the Prozeßrechner 1984, 1984

1981

Ingenieurgerechte Spezifikation der Synchronisierung paralleler Rechenprozesse.

Peter Göhner

PhD thesis, 1981

Spezifikation der Synchronisierung paralleler Rechenprozesse in EPOS.

Peter Göhner

Proceedings of the Fachtagung Prozeßrechner 1981, 1981

1980

Umwandlung von EPOS-Spezifikationen in Petri-Netze.

Peter Göhner

Proceedings of the GI - 10. Jahrestagung, Saarbrücken, 30. September, 1980

1979

EPOS : A Specification and Design Technique for Computer Controlled Real-time Automation Systems.

Rudolf Lauber, Joachim Biewald, Peter Göhner, H. Schelling

Proceedings of the 4th International Conference on Software Engineering, 1979