Pengcheng Hu

Shihua Tang

Yan Zhang

Xiaohui Song

Mengbo Sun

IEEE Access, 2023

Ground Source Heat Pump System Based on Residential Building.

[BibT_eX]

[DOI]

Abhisek Ukil

Nirmal-Kumar C. Nair

Proceedings of the IEEE PES Innovative Smart Grid Technologies - Asia, 2023

Photovoltaic Maximum Power Point Tracking Based on Bayesian Optimization Neural Network.

[BibT_eX]

[DOI]

Abhisek Ukil

Nirmal-Kumar C. Nair

Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023

Maximum Power Point Tracking Algorithm Based on Adaptive Particle Swarm Optimization Under Partial Shading Conditions.

[BibT_eX]

[DOI]

Abhisek Ukil

Nirmal-Kumar C. Nair

Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023

2022

Skeleton Curve-Guided Five-Axis Sweep Scanning for Surface With Multiple Holes.

[BibT_eX]

[DOI]

IEEE Trans Autom. Sci. Eng., 2022

Feature Points Recognition of Computerized Numerical Control Machining Tool Path Based on Deep Learning.

[BibT_eX]

[DOI]

Comput. Aided Des., 2022

Efficient Cutting Power Modeling of Three-Axis Milling Based on Transfer Learning and Neural Network.

[BibT_eX]

[DOI]

IEEE Access, 2022

2021

Comparison of Modelling Strategies to Estimate Phenotypic Values from an Unmanned Aerial Vehicle with Spectral and Temporal Vegetation Indexes.

[BibT_eX]

[DOI]

Remote. Sens., 2021

A variable-depth multi-layer five-axis trochoidal milling method for machining deep freeform 3D slots.

[BibT_eX]

[DOI]

Robotics Comput. Integr. Manuf., 2021

Fused-like angles: replacement for roll-pitch-yaw angles for a six-degree-of-freedom grating interferometer.

[BibT_eX]

[DOI]

Di Chang

Frontiers Inf. Technol. Electron. Eng., 2021

2020

Homodyne Laser Vibrometer With Detectability of Nanoscale Vibration and Adaptability to Reflectivity.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2020

Design for a Highly Stable Laser Source Based on the Error Model of High-Speed High-Resolution Heterodyne Interferometers.

[BibT_eX]

[DOI]

Sensors, 2020

Ultrastable Offset-Locking Continuous Wave Laser to a Frequency Comb with a Compound Control Method for Precision Interferometry.

[BibT_eX]

[DOI]

Sensors, 2020

Document-level emotion detection using graph-based margin regularization.

[BibT_eX]

[DOI]

Ruihua Cheng

Jie Zhang

Neurocomputing, 2020

A spiral-based inspection path generation algorithm for efficient five-axis sweep scanning of freeform surfaces.

[BibT_eX]

[DOI]

Comput. Aided Des., 2020

2019

The Improvements of the NIM-2 Joule Balance.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2019

A Parasitic Displacement Measurement System for Suspended Coil in Joule Balance.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2019

Displacement measuring grating interferometer: a review.

[BibT_eX]

[DOI]

Frontiers Inf. Technol. Electron. Eng., 2019

2018

Thermal Drift of Optics in Separated-Beam Heterodyne Interferometers.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2018

Nonlinear Errors Resulting from Ghost Reflection and Its Coupling with Optical Mixing in Heterodyne Laser Interferometers.

[BibT_eX]

[DOI]

Sensors, 2018

Measurement Method for Nonlinearity in Heterodyne Laser Interferometers Based on Double-Channel Quadrature Demodulation.

[BibT_eX]

[DOI]

Sensors, 2018

Automatic generation of efficient and interference-free five-axis scanning path for free-form surface inspection.

[BibT_eX]

[DOI]

Comput. Aided Des., 2018

2017

The Design and Construction of the Joule Balance NIM-2.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2017

A Six-Axis Heterodyne Interferometer System for the Joule Balance.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2017

Automatic Generation of Five-Axis Continuous Inspection Paths for Free-Form Surfaces.

[BibT_eX]

[DOI]

Rong Zhang

IEEE Trans Autom. Sci. Eng., 2017

Efficiency-optimal iso-planar tool path generation for five-axis finishing machining of freeform surfaces.

[BibT_eX]

[DOI]

Lufeng Chen

Comput. Aided Des., 2017

Efficient Cutter-Freeform Surfaces Projection Method for Five-Axis Tool Path Computation.

[BibT_eX]

[DOI]

Proceedings of the Intelligent Robotics and Applications - 10th International Conference, 2017

2016

A Capacitive Sensor for the Measurement of Departure From the Vertical Movement.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2016

An Annular Planar-Capacitive Tilt Sensor With a 360° Measurement Range.

[BibT_eX]

[DOI]

Jiahao Guo

IEEE Trans. Ind. Electron., 2016

Analysis of a Segmented Annular Coplanar Capacitive Tilt Sensor with Increased Sensitivity.

[BibT_eX]

[DOI]

Jiahao Guo

Sensors, 2016

Absolute Position Sensing Based on a Robust Differential Capacitive Sensor with a Grounded Shield Window.

[BibT_eX]

[DOI]

Sensors, 2016

基于时间尺度的一类典型高阶系统的二阶线性自抗扰控制 (Second Order Linear Active Disturbance Rejection Control for a Class of Typical High Order System Based on Time Scale).

[BibT_eX]

[DOI]

Rui Guo

Yamin Fan

计算机科学, 2016

Five-axis tool path generation based on machine-dependent potential field.

[BibT_eX]

[DOI]

Int. J. Comput. Integr. Manuf., 2016

2015

Long-Distance Measurement Applying Two High-Stability and Synchronous Wavelengths.

[BibT_eX]

[DOI]

Hongxing Yang

IEEE Trans. Instrum. Meas., 2015

Compensation for the Variable Cyclic Error in Homodyne Laser Interferometers.

[BibT_eX]

[DOI]

Sensors, 2015

Five-axis finishing tool path generation for a mesh blade based on linear morphing cone.

[BibT_eX]

[DOI]

Rong Zhang

J. Comput. Des. Eng., 2015

Boundary-Conformed Tool Path Generation Based on Global Reparametrization.

[BibT_eX]

[DOI]

Proceedings of the 14th International Conference on Computer-Aided Design and Computer Graphics, 2015

2013

Global obstacle avoidance and minimum workpiece setups in five-axis machining.

[BibT_eX]

[DOI]

Chen-Han Lee

Comput. Aided Des., 2013

2011

Improving the dynamics of five-axis machining through optimization of workpiece setup and tool orientations.

[BibT_eX]

[DOI]