Paolo Sommella

Orcid: 0000-0001-9607-866X

According to our database1, Paolo Sommella authored at least 64 papers between 2008 and 2024.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of five.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2024
Concept Drift Mitigation in Low-Cost Air Quality Monitoring Networks.
Sensors, May, 2024

Temperature Sensitivity Analysis of Inertial Measurement Unit Under Dynamic Conditions.
IEEE Trans. Instrum. Meas., 2024

Propagation of Measurement Uncertainty in IMU Orientation Tracking Algorithms.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024

Dynamic Temperature Test of Gyroscope for Automotive Applications.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

Remaining Useful Life estimation for MEMS-based transducers.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

2023
Analysis of Inertial Measurement Units Performances Under Dynamic Conditions.
IEEE Trans. Instrum. Meas., 2023

A Novel Methodology for Unsupervised Anomaly Detection in Industrial Electrical Systems.
IEEE Trans. Instrum. Meas., 2023

Pseudo-Adiabatic Concrete Curing Monitoring IoT-Enabled System.
Proceedings of the 2023 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2023

Frequency analysis for the measurement of environmental noise.
Proceedings of the IEEE International Workshop on Metrology for Automotive, 2023

An experimental setup for characterization of Inertial measurement unit under dynamic conditions.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

Anomaly Detection on Industrial Electrical Systems using Deep Learning.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

2022
A Virtual Soil Moisture Sensor for Smart Farming Using Deep Learning.
IEEE Trans. Instrum. Meas., 2022

Influence of Concept Drift on Metrological Performance of Low-Cost NO<sub>2</sub> Sensors.
IEEE Trans. Instrum. Meas., 2022

Stress Testing for Performance Analysis of Orientation Estimation Algorithms.
IEEE Trans. Instrum. Meas., 2022

Recent Advances in Diagnosis of Skin Lesions Using Dermoscopic Images Based on Deep Learning.
IEEE Access, 2022

Acoustic Monitoring of Environmental Noise Based on Sampling Approach.
Proceedings of the IEEE International Symposium on Measurements & Networking, 2022

Temperature stress tests on low-cost IMU systems: Analysis and first proposal for enhancing performance.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

Skin Cancer Classification based on Cosine Cyclical Learning Rate with Deep Learning.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

Distance Measurement Characterization for Ultra Wide Band Indoor Localization Systems.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

2021
Experimental Analysis of Filtering Algorithms for IMU-Based Applications Under Vibrations.
IEEE Trans. Instrum. Meas., 2021

Ensembling CNNs for dermoscopic analysis of suspicious skin lesions.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2021

Reliability and Functional Analysis of IMU systems under temperature-based stress tests.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

2020
Accurate Measurement of Reciprocating Kinetic Friction Coefficient Through Automatic Detection of the Running-In.
IEEE Trans. Instrum. Meas., 2020

Quality Assessment of the Inshell Hazelnuts Based on TD-NMR Analysis.
IEEE Trans. Instrum. Meas., 2020

Soft Sensors for Instrument Fault Accommodation in Semiactive Motorcycle Suspension Systems.
IEEE Trans. Instrum. Meas., 2020

A distributed measurement system for the estimation of air quality.
IEEE Instrum. Meas. Mag., 2020

Deep Melanoma classification with K-Fold Cross-Validation for Process optimization.
Proceedings of the 2020 IEEE International Symposium on Medical Measurements and Applications, 2020

Characterization of Inertial Measurement Units under Environmental Stress Screening.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

Wireless Sensor Network Calibration for PM10 Measurement.
Proceedings of the IEEE International Conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications, 2020

2019
A Statistical Approach for Improving the Accuracy of Dry Friction Coefficient Measurement.
IEEE Trans. Instrum. Meas., 2019

Online Fault Detection of Rear Stroke Suspension Sensor in Motorcycle.
IEEE Trans. Instrum. Meas., 2019

A wearable low-cost device for measurement of human exposure to transmitted vibration on motorcycle.
Proceedings of the 2nd Workshop on Metrology for Industry 4.0 and IoT MetroInd4.0&IoT 2019, 2019

A Smart Wireless Sensor Network For PM10 Measurement.
Proceedings of the 5th IEEE International Symposium on Measurements & Networking, 2019

Accurate measurement of Kinetic Friction Coefficient by using two types of tribometer.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

An IFDI Scheme for Stroke Sensors in Motorcycle Semi-Active Suspension Systems.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

2018
Accurate Estimation of the Environmental Noise Through Sampling Approach: Selection of the Measurement Time.
IEEE Trans. Instrum. Meas., 2018

A Virtual ANN-Based Sensor for IFD in Two-Wheeled Vehicle.
Proceedings of the Sensors, 2018

Estimating the Outdoor PM10 Concentration Through Wireless Sensor Network for Smart Metering.
Proceedings of the Sensors, 2018

Measuring suspension velocity from acceleration integration.
Proceedings of the 16th IEEE International Conference on Industrial Informatics, 2018

Task-based measurements for estimating the workers' exposure to acoustic noise.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

Accurate measurement of dry friction coefficient using reciprocating tribometer.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

Semi-active suspension system for motorcycles: From the idea to the industrial product.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

Advanced TD-NMR based estimation of the inshell hazelnuts quality parameters.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

Real-time implementation of an IFD scheme for motorcycle sensors.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

2017
Choosing Bootstrap Method for the Estimation of the Uncertainty of Traffic Noise Measurements.
IEEE Trans. Instrum. Meas., 2017

Hazelnut Oil Classification by NMR Techniques.
IEEE Trans. Instrum. Meas., 2017

Influence of measurement time on acoustic noise uncertainty.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

Velocity prediction from acceleration measurements in motorcycle suspensions.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

Using a SVD-based algorithm for T2 spectrum calculation in TD-NMR application to detect hidden defects in hazelnuts.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

Sensitivity analysis of influence quantities on signal-to-noise ratio in face-based recognition systems.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

I3DermoscopyApp: Hacking Melanoma thanks to IoT technologies.
Proceedings of the 50th Hawaii International Conference on System Sciences, 2017

2016
Investigation of the NMR techniques to detect hidden defects in hazelnuts.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2016

2015
A web-based application for dermoscopic measurements and learning.
Proceedings of the 2015 IEEE International Symposium on Medical Measurements and Applications, 2015

A distributed measurement system for dermoscopic analysis of pigmented skin lesions.
Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

Smart meters and demand response: A double challenge.
Proceedings of the IEEE International Conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications, 2015

Towards visual smart metering exploiting wM-Bus and DLMS/COSEM.
Proceedings of the IEEE International Conference on Computational Intelligence and Virtual Environments for Measurement Systems and Applications, 2015

2014
On road testing of control strategies for semi-active suspensions.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

2013
Smart sensing and smart material for smart automotive damping.
IEEE Instrum. Meas. Mag., 2013

Characterization of motorcycle suspension systems: Comfort and handling performance evaluation.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

2010
Automatic Diagnosis of Melanoma: A Software System Based on the 7-Point Check-List.
Proceedings of the 43rd Hawaii International International Conference on Systems Science (HICSS-43 2010), 2010

2009
Metrological Performance of Traffic Detection Systems.
IEEE Trans. Instrum. Meas., 2009

2008
A Methodology to Test Instrument Software: An Automotive Diagnostic System Application.
IEEE Trans. Instrum. Meas., 2008

A Statistical Approach for Improving the Performance of a Testing Methodology for Measurement Software.
IEEE Trans. Instrum. Meas., 2008

An improved procedure for the automatic detection of dermoscopic structures in digital ELM images of skin lesions.
Proceedings of the IEEE International Conference on Virtual Environments, 2008


  Loading...