Paolo Cova

Orcid: 0000-0003-0040-098X

According to our database1, Paolo Cova authored at least 41 papers between 2002 and 2024.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2024
Operational Amplifier Characterization at Cryogenic Temperatures.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

2023
Electrical Vehicle Fleet Management for Industrial Environment with Battery SoH Prediction Through Neural Networks.
Proceedings of the IEEE International Conference on Metrology for eXtended Reality, 2023

2022
Development of a cryogenic DC-DC Boost Converter: devices characterization and first prototype measurements.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

2021
Modeling of a university campus Micro-Grid for optimal planning of renewable generation and storage deployment.
Proceedings of the IEEE International Smart Cities Conference, 2021

2018
Comprehensive Control System for Parallelable 60 Hz-2MVA Harbor AC/AC Converters.
IEEE Trans. Ind. Informatics, 2018

Photovoltaic plant maintainability optimization and degradation detection: Modelling and characterization.
Microelectron. Reliab., 2018

Water cold plates for high power converters: A software tool for easy optimized design.
Microelectron. Reliab., 2018

Non-linear thermal simulation at system level: Compact modelling and experimental validation.
Microelectron. Reliab., 2018

GaN transistors efficient cooling by graphene foam.
Microelectron. Reliab., 2018

2017
Thermal design and characterization of a modular integrated liquid cooled 1200 V-35 A SiC MOSFET bi-directional switch.
Microelectron. Reliab., 2017

GaN-based triple active bridge for avionic application.
Proceedings of the 26th IEEE International Symposium on Industrial Electronics, 2017

2016
Metrological Characterization of Cold Plates for Power Converters.
IEEE Trans. Instrum. Meas., 2016

Thermal design optimization of novel modular power converter assembly enabling higher performance, reliability and availability.
Microelectron. Reliab., 2016

A simple 1-D finite elements approach to model the effect of PCB in electronic assemblies.
Microelectron. Reliab., 2016

2015
Numerical analysis and experimental tests for solder joints power cycling optimization.
Microelectron. Reliab., 2015

2014
Robust snubberless soft-switching power converter using SiC power MOSFETs and bespoke thermal design.
Microelectron. Reliab., 2014

Thermal damage in SiC Schottky diodes induced by SE heavy ions.
Microelectron. Reliab., 2014

A main converter for future LHC experiments: Features measurement and reliability considerations.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

Metrological characterization of a cold plate test bench.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

2013
Temperature-dependent reverse-bias stress of normally-off GaN power FETs.
Microelectron. Reliab., 2013

Finite element modeling and characterization of lead-free solder joints fatigue life during power cycling of surface mounting power devices.
Microelectron. Reliab., 2013

Thermal optimization of water heat sink for power converters with tight thermal constraints.
Microelectron. Reliab., 2013

2012
Thermal modeling and design of power converters with tight thermal constraints.
Microelectron. Reliab., 2012

Editorial.
Microelectron. Reliab., 2012

Reliability oriented design of power supplies for high energy physics applications.
Microelectron. Reliab., 2012

Fault tolerant digital control of 2 MVA parallelable frequency converters for harbor applications.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

2011
Dynamic electro-thermal modeling for power device assemblies.
Microelectron. Reliab., 2011

2010
Coupled measurement-simulation procedure for very high power fast recovery - Soft behavior diode design and testing.
Microelectron. Reliab., 2010

Thermal modeling of planar transformer for switching power converters.
Microelectron. Reliab., 2010

2009
Heat management for power converters in sealed enclosures: A numerical study.
Microelectron. Reliab., 2009

2008
Thermal modeling of high frequency DC-DC switching modules: Electromagnetic and thermal simulation of magnetic components.
Microelectron. Reliab., 2008

2007
Test structures for dielectric spectroscopy of thin films at microwave frequencies.
Microelectron. Reliab., 2007

Layout Considerations and Thermal Analysis of a 1.8 MHz Resonant VRM.
Proceedings of the Conference Record of the 2007 IEEE Industry Applications Conference Forty-Second IAS Annual Meeting, 2007

2006
Thermal characterization and modeling of power hybrid converters for distributed power systems.
Microelectron. Reliab., 2006

Experimental and numerical study of the recovery softness and overvoltage dependence on p-i-n diode design.
Microelectron. J., 2006

2005
On state breakdown in PHEMTs and its temperature dependence.
Microelectron. Reliab., 2005

2004
High reliable high power diode for welding applications.
Microelectron. Reliab., 2004

Temperature-dependent breakdown and hot carrier stress of PHEMTs.
Microelectron. Reliab., 2004

2003
Power p-i-n diodes for snubberless application: H<sup>+</sup> irradiation for soft and reliable reverse recovery.
Microelectron. Reliab., 2003

2002
High-field step-stress and long term stability of PHEMTs with different gate and recess lengths.
Microelectron. Reliab., 2002

A Novel Thermomechanics -Based Lifetime Prediction Model for Cycle Fatigue Failure Mechanisms in Power Semiconductors.
Microelectron. Reliab., 2002


  Loading...