Michael Galea

Orcid: 0000-0002-9094-611X

According to our database¹, Michael Galea authored at least 56 papers between 2011 and 2024.

Collaborative distances:

Dijkstra number² of four.
Erdős number³ of four.

Timeline

Legend:

Book

In proceedings

Article

PhD thesis

Dataset

Other

Bibliography

2024

A New Output Integral Sliding Mode Fault-Tolerant Control and Fault Estimation Scheme for Uncertain Systems.

[BibT_eX]

[DOI]

IEEE Trans Autom. Sci. Eng., July, 2024

Discontinuous Modulated Model Predictive Control for Low Inductance High-Speed Electric Drive Applications.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2024

2023

Time-to-Failure Analysis of Short-Duty Cycle, Inverter-Fed Electrical Machines Exposed to Prevailing Electrical Stress.

[BibT_eX]

[DOI]

IEEE Trans. Aerosp. Electron. Syst., December, 2023

Characterization of PDIV, PDEV, and RPDIV in Insulated Wires Under Unipolar Repetitive Square Wave Excitations for Inverter-Fed Motors.

[BibT_eX]

[DOI]

Hadi Naderiallaf

Paolo Giangrande

Michael Galea

IEEE Access, 2023

2022

Cogging Force Optimization of Double-Sided Tubular Linear Machine With Tooth-Cutting.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2022

A Contribution to Thermal Ageing Assessment of Glass Fiber Insulated Wire Based on Partial Discharges Activity.

[BibT_eX]

[DOI]

Hadi Naderiallaf

Paolo Giangrande

Michael Galea

IEEE Access, 2022

Mitigation of AC Winding Losses for Aircraft Propulsion Motors.

[BibT_eX]

[DOI]

Proceedings of the IECON 2022, 2022

2021

A Novel Sizing Approach for Synchronous Reluctance Machines.

[BibT_eX]

[DOI]

Mukhammed Murataliyev

Michele Degano

Michael Galea

IEEE Trans. Ind. Electron., 2021

Lifetime Estimation of Enameled Wires Under Accelerated Thermal Aging Using Curve Fitting Methods.

[BibT_eX]

[DOI]

IEEE Access, 2021

Fast and Simple Tuning Rules of Synchronous Reference Frame Proportional-Integral Current Controller.

[BibT_eX]

[DOI]

IEEE Access, 2021

A Multiport Power Electronics Converter for Hybrid Traction Applications.

[BibT_eX]

[DOI]

Wei Juin Choy

Alessandro Costabeber

IEEE Access, 2021

Review of Speed-Extension of Permanent Magnet Synchronous Motor with Reconfigurable-Winding System.

[BibT_eX]

[DOI]

Proceedings of the 30th IEEE International Symposium on Industrial Electronics, 2021

Trade-off Analysis of Energy Storage Systems for Helicopter Landing Gear Electromechanical Actuator.

[BibT_eX]

[DOI]

Proceedings of the 30th IEEE International Symposium on Industrial Electronics, 2021

Comparative Study of Current Control Techniques for Fault-tolerant Five-phase PMSM.

[BibT_eX]

[DOI]

Proceedings of the IECON 2021, 2021

Design and Analysis of a Double Coaxial Magnetic Coupling to Improve Torque Density.

[BibT_eX]

[DOI]

Proceedings of the IECON 2021, 2021

2020

A Time-Saving Approach for the Thermal Lifetime Evaluation of Low-Voltage Electrical Machines.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2020

Thermal Overload and Insulation Aging of Short Duty Cycle, Aerospace Motors.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2020

The Role of Neural Networks in Predicting the Thermal Life of Electrical Machines.

[BibT_eX]

[DOI]

IEEE Access, 2020

Additive Manufacturing and Testing of a Soft Magnetic Rotor for a Switched Reluctance Motor.

[BibT_eX]

[DOI]

IEEE Access, 2020

Analysis and Modelling of High Frequency Effects on Synchronous Generator's Armature Conductors.

[BibT_eX]

[DOI]

Proceedings of the 29th IEEE International Symposium on Industrial Electronics, 2020

Improving Performance and Extending Lifetime of PMSMs via Advanced End-Winding Cooling.

[BibT_eX]

[DOI]

Proceedings of the 29th IEEE International Symposium on Industrial Electronics, 2020

Feasibility Design Study of High-Performance, High-Power-Density Propulsion Motor for Middle-Range Electric Aircraft.

[BibT_eX]

[DOI]

Proceedings of the 29th IEEE International Symposium on Industrial Electronics, 2020

Predicting Insulation Resistance of Enamelled Wire using Neural Network and Curve Fit Methods Under Thermal Aging.

[BibT_eX]

[DOI]

Proceedings of the 2020 International Joint Conference on Neural Networks, 2020

Weibull Distribution and Geometrical Size Factor for Evaluating the Thermal Life of Electrical Machines' Insulation.

[BibT_eX]

[DOI]

Vincenzo Madonna

Paolo Giangrande

Michael Galea

Proceedings of the 46th Annual Conference of the IEEE Industrial Electronics Society, 2020

Polyimide-Coated Fibre Bragg Grating (FBG) Sensors for Thermal Mapping of Electric Machine Windings.

[BibT_eX]

[DOI]

Proceedings of the 22nd International Conference on Transparent Optical Networks, 2020

Predictive Torque Control with Fixed Switching Frequency for Induction Motor Drives.

[BibT_eX]

[DOI]

Proceedings of the 2020 IEEE International Conference on Industrial Technology, 2020

2019

A Methodology to Remove Stator Skew in Small-Medium Size Synchronous Generators via Innovative Damper Cage Designs.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2019

Simplified Damper Cage Circuital Model and Fast Analytical-Numerical Approach for the Analysis of Synchronous Generators.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2019

Consideration on Eddy Current Reduction Techniques for Solid Materials Used in Unconventional Magnetic Circuits.

[BibT_eX]

[DOI]

Ahmed Mahmood Mohammed

Michael Galea

Tom Cox

Chris Gerada

IEEE Trans. Ind. Electron., 2019

Improved Thermal Management and Analysis for Stator End-Windings of Electrical Machines.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2019

An Active Modulation Scheme to Boost Voltage Utilization of the Dual Converter With a Floating Bridge.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2019

Modeling of Classical Synchronous Generators Using Size-Efficient Lookup Tables With Skewing Effect.

[BibT_eX]

[DOI]

IEEE Access, 2019

The potential of exploiting non-symmetric structures in electrical machines.

[BibT_eX]

[DOI]

Proceedings of the IECON 2019, 2019

An Improved Automatic Voltage Regulator for Self-Excited, Small-to-Medium Power Generating Sets equipped with Brushless Excitation Systems.

[BibT_eX]

[DOI]

Proceedings of the IECON 2019, 2019

On the Thermal Insulation Qualification of Low Voltage Electrical Machines.

[BibT_eX]

[DOI]

Proceedings of the IECON 2019, 2019

Analysis of Energy Storage System Requirements for Aircraft Electric Taxiing Operations.

[BibT_eX]

[DOI]

Proceedings of the IECON 2019, 2019

Fast and Accurate Multi-Physics Model for Optimization-based Design of VSBBC.

[BibT_eX]

[DOI]

Proceedings of the IECON 2019, 2019

An Enhanced Unified Space Vector Modulation Technique for Dual Converters with Isolated Voltage Supplies.

[BibT_eX]

[DOI]

Proceedings of the IECON 2019, 2019

2018

A Two-Degrees-of-Freedom System for Wheel Traction Applications.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2018

Analysis, Modeling, and Design Considerations for the Excitation Systems of Synchronous Generators.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2018

Development of a High Force Density, Actuation Drive for an Aerospace Application.

[BibT_eX]

[DOI]

Michael Galea

Giampaolo Buticchi

Proceedings of the 27th IEEE International Symposium on Industrial Electronics, 2018

Design and Testing of PMSM for Aerospace EMA Applications.

[BibT_eX]

[DOI]

Proceedings of the IECON 2018, 2018

2017

Analytical Thermal Model for Fast Stator Winding Temperature Prediction.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2017

A Fast Method for Modeling Skew and Its Effects in Salient-Pole Synchronous Generators.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2017

Improved Damper Cage Design for Salient-Pole Synchronous Generators.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2017

A New Method for Determining the Magnetic Properties of Solid Materials Employed in Unconventional Magnetic Circuits.

[BibT_eX]

[DOI]

Ahmed Mahmood Mohammed

Tom Cox

Michael Galea

Chris Gerada

IEEE Trans. Ind. Electron., 2017

2016

Multiobjective Optimization of a Magnetically Levitated Planar Motor With Multilayer Windings.

[BibT_eX]

[DOI]

IEEE Trans. Ind. Electron., 2016

Topology investigation on high speed PM generator with back wound windings.

[BibT_eX]

[DOI]

Proceedings of the 25th IEEE International Symposium on Industrial Electronics, 2016

2-D analytical model for dual-stator machines with permanent magnets.

[BibT_eX]

[DOI]

Dmitry Golovanov

Michael Galea

Chris Gerada

Proceedings of the IECON 2016, 2016

Trade-off analysis and design of a high power density PM machine for flooded industrial pump.

[BibT_eX]

[DOI]

Proceedings of the IECON 2016, 2016

2015

A voltage controlled power resistor circuit for active gate driving of wide-bandgap power devices.

[BibT_eX]

[DOI]

Proceedings of the IECON 2015, 2015

Optimal design of an electro-mechanical actuator for aerospace application.

[BibT_eX]

[DOI]

Proceedings of the IECON 2015, 2015

Comparison of multi-physics optimization methods for high speed synchrnous reluctance machines.

[BibT_eX]

[DOI]

Proceedings of the IECON 2015, 2015

End barrier shape optimizations and sensitivity analysis of synchrnous reluctance machines.

[BibT_eX]

[DOI]

Proceedings of the IECON 2015, 2015

2014

Enabling technologies for a fault tolerant linear actuation drive.

[BibT_eX]

[DOI]

Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014

2011

Design Considerations for a Fault-Tolerant Flux-Switching Permanent-Magnet Machine.

[BibT_eX]

[DOI]

Tsarafidy Raminosoa

Chris Gerada

Michael Galea

IEEE Trans. Ind. Electron., 2011

Michael Galea

Timeline

Legend:

Links

Online presence:

On csauthors.net:

Bibliography

Loading...