Marco Mugnaini

Orcid: 0000-0002-2410-1581

According to our database1, Marco Mugnaini authored at least 141 papers between 2002 and 2024.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2024
Advancing Thrombosis Research: A Novel Device for Measuring Clot Permeability.
Sensors, June, 2024

Influence of Front-End Electronics on Metrological Performance of QCM Systems.
Sensors, June, 2024

A Smart Low-Cost QCM-D Based on Lightweight Frequency Domain Processing.
IEEE Trans. Instrum. Meas., 2024

Investigating Temperature Effects on Resonant Photoacoustic Gas Sensor: Ring-Shaped Cell Case Study.
Proceedings of the IEEE International Symposium on Robotic and Sensors Environments, 2024

A Method for Sensing Passive Joints of Robotic Extra Fingers for Trajectory Tracking.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024

A Convolutional Neural Network to Locate Unbalance in Turbomachinery Supported by AMBs.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024

Measurement System for Blood Sedimentation Rate Through Impedenzimetric Sampling.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2024

A Measurement System for the Dynamic Assessment of Blood Clot Permeability.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2024

Simultaneous Rotor and Controller Tuning for Active Magnetic Bearings in Turbomachinery.
Proceedings of the International Conference on Control, Automation and Diagnosis, 2024

Toward a compact low-cost electronic interface for photoacoustic based gas sensors.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

QCM measurement systems: Problems and performance analysis.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

A Low-Cost Edge Computing Device for Real-Time Detection of Motor Symptoms in Neurodegenerative Diseases Using Machine Learning.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

2023
A Low Complexity Rolling Bearing Diagnosis Technique Based on Machine Learning and Smart Preprocessing.
Sensors, September, 2023

A Convolutional Neural Network for Electrical Fault Recognition in Active Magnetic Bearing Systems.
Sensors, August, 2023

Characterization of the Response of Magnetron Sputtered In2O3-x Sensors to NO2.
Sensors, March, 2023

A Photoacoustic-Based Measurement System for Dual Detection of NO<sub>2</sub> and CO<sub>2</sub> in Combustion Exhaust Gases.
IEEE Trans. Instrum. Meas., 2023

Highly Sensitive Photoacoustic NO<sub>2</sub> Measurement System Based on an Optimized Ring-Shaped Resonant Cell.
IEEE Trans. Instrum. Meas., 2023

A Distributed IoT Air Quality Measurement System for High-Risk Workplace Safety Enhancement.
Sensors, 2023

Bearing Failure Classification with Low Complexity Neural Network.
Proceedings of the IEEE International Conference on Metrology for eXtended Reality, 2023

Machine Learning Regressor for Impedance Parameter Estimation of QCM Sensors for Liquid Media Characterization.
Proceedings of the IEEE International Conference on Metrology for eXtended Reality, 2023

A portable, low cost clot permeability measurement system.
Proceedings of the 2023 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2023

Embedded Machine Learning for 3D Indoor Visible Light Positioning via Optimized Fingerprinting.
Proceedings of the 2023 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2023

Smart Fault Dictionary for Active Magnetic Bearings Systems.
Proceedings of the 2023 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2023

A MobileNet Neural Network Model for Fault Diagnosis in Roller Bearings.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

Performance of reinforced epoxy resin embedded MEMS accelerometers for IoT condition monitoring.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

A simulation tool for sensor selection in AMB rotor supported systems.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

Investigation on NO2 sensing behavior of WO3 nanograined resistive sensors.
Proceedings of the 20th International Multi-Conference on Systems, Signals & Devices, 2023

2022
Assessment of LoRaWAN Transmission Systems Under Temperature and Humidity, Gas, and Vibration Aging Effects Within IIoT Contexts.
IEEE Trans. Instrum. Meas., 2022

QCM Measurements in Newtonian Liquids: Problems and Performance Analysis.
IEEE Trans. Instrum. Meas., 2022

Smart Gravimetric System for Enhanced Security of Accesses to Public Places Embedding a MobileNet Neural Network Classifier.
IEEE Trans. Instrum. Meas., 2022

A Stochastic Algorithm to Design Min-Entropy Tuning Controllers for True Random Number Generators.
IEEE Trans. Circuits Syst. I Regul. Pap., 2022

Performance Evaluation of an IoT Sensor Node for Health Monitoring of Artwork and Ancient Wooden Structures.
Sensors, 2022

Strategies for the Accurate Measurement of the Resonance Frequency in QCM-D Systems via Low-Cost Digital Techniques.
Sensors, 2022

Calibration of a multicomponent MEMS sensor for vibration monitoring of rolling bearings: broad-band and amplitude traceability up to 20 kHz.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2022

High Performance Analog MEMS for IoT Based Condition Monitoring, Characterization with a Bearing Failure Emulation Test Bench.
Proceedings of the IEEE International Workshop on Metrology for Automotive, 2022

Roller Bearing Failures Classification with Low Computational Cost Embedded Machine Learning.
Proceedings of the IEEE International Workshop on Metrology for Automotive, 2022

Monitoring of the Viscoelastic Behaviour of Bacterial Biofilms Exploiting an Accurate QCM System.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2022

A Low-Complexity Method to Address Process Variability in True Random Number Generators based on Digital Nonlinear Oscillators.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2022

A Novel Front-End Circuit for the Digital Conversion of QCM-D Responses for FPGA-Based Frequency Measurements.
Proceedings of the Applications in Electronics Pervading Industry, Environment and Society, 2022

A High Accuracy QCM Based Sensing System for in Water Ammonia Monitoring.
Proceedings of the Sensors and Microsystems, 2022

2021
An AlN Micromachined Mass Sensor: Modeling and Characterization.
IEEE Trans. Instrum. Meas., 2021

A LoRaWAN Carbon Monoxide Measurement System With Low-Power Sensor Triggering for the Monitoring of Domestic and Industrial Boilers.
IEEE Trans. Instrum. Meas., 2021

Battery-Less HF RFID Sensor Tag for Soil Moisture Measurements.
IEEE Trans. Instrum. Meas., 2021

An Adaptive Measurement System for the Simultaneous Evaluation of Frequency Shift and Series Resistance of QCM in Liquid.
Sensors, 2021

Modeling the Conductivity Response to NO2 Gas of Films Based on MWCNT Networks.
Sensors, 2021

Ion Current Sensor for Gas Turbine Condition Dynamical Monitoring: Modeling and Characterization.
Sensors, 2021

Condition Monitoring with LoRaWAN: Preliminary Tests on Gas Turbine Exciters.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2021

NO2 photoacoustic sensing system based on resonant cell and UV-LED sensor.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2021

Real Time Car Passengers Comfort Monitoring by means of Environmental and Vibrational Measurements.
Proceedings of the IEEE International Workshop on Metrology for Automotive, 2021

Distributed IoT system to enhance worker safety in large open areas.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

Data Transmission from ATEX Boxes by Means of LoRa Technology for Industrial Internet of Things (IIoT) Applications.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

LoRaWAN Transmission System Capability Assessment in Industrial Environment Under Temperature and Humidity Characterization.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

Impedance characterization of a QCM-based measurement system in liquid media.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

Long Range (LoRa) Transmission Through Ice: Preliminary Results.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

Smart gravimetric system based on Deep Learning for enhanced safety of accesses to public places.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

Low-Level Advanced Design of True Random Number Generators Based on Truly Chaotic Digital Nonlinear Oscillators in FPGAs.
Proceedings of the Applications in Electronics Pervading Industry, Environment and Society, 2021

2020
Performance Analysis of a Humidity Sensor Based on a Microresonator Functionalized With TiO<sub>2</sub> Nanoparticles.
IEEE Trans. Instrum. Meas., 2020

Ion Sensor-Based Measurement Systems: Application to Combustion Monitoring in Gas Turbines.
IEEE Trans. Instrum. Meas., 2020

A New Class of Digital Circuits for the Design of Entropy Sources in Programmable Logic.
IEEE Trans. Circuits Syst. I Regul. Pap., 2020

NO2 Sensing with SWCNT Decorated by Nanoparticles in Temperature Pulsed Mode: Modeling and Characterization.
Sensors, 2020

Highly Sensitive Detection of NO2 by Au and TiO2 Nanoparticles Decorated SWCNTs Sensors.
Sensors, 2020

Working Principle and Performance of a Scalable Gravimetric System for the Monitoring of Access to Public Places.
Sensors, 2020

Magnetic brakes material characterization under accelerated testing conditions.
Reliab. Eng. Syst. Saf., 2020

Interoperability among Sub-GHz Technologies for Metallic Assets Tracking and Monitoring.
Proceedings of the 2020 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2020

An Automatic Battery Recharge and Condition Monitoring System for Autonomous Drones.
Proceedings of the 2020 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2020

Low-cost, robust gravimetric system for enhanced security of accesses to public places.
Proceedings of the 2020 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2020

A New Class of Chaotic Sources in Programmable Logic Devices.
Proceedings of the 2020 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2020

A Characterization System for Bearing Condition Monitoring Sensors, a Case Study with a Low Power Wireless Triaxial MEMS Based Sensor.
Proceedings of the 2020 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2020

Impedance Measurement Exploited for Anaphylaxis Prediction in Casein Allergic Children.
Proceedings of the 2020 IEEE International Symposium on Medical Measurements and Applications, 2020

Chaos in Fully Digital Circuits: A Novel Approach to the Design of Entropy Sources.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2020

A measurement system for the evaluation of efficiency of enzyme accelerated CO2 capture systems based on modeling.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

Battery-less HF RFID sensor tag for humidity measurements based on TiO2 nanoparticles.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

Reliability and Availability Evaluation of Linear LoRaWAN Sensor Network Architectures for Pipeline Monitoring.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

Design of Area-Efficient Physical Unclonable Functions Derived From CNNs: Trade-Offs and Optimization.
Proceedings of the European Conference on Circuit Theory and Design, 2020

2019
Instantaneous Rotation Speed Measurement System Based on Variable Reluctance Sensors for Torsional Vibration Monitoring.
IEEE Trans. Instrum. Meas., 2019

Measurement System Based on Electrostatic Sensors to Detect Moving Charged Debris With Planar-Isotropic Accuracy.
IEEE Trans. Instrum. Meas., 2019

On the Suitability of Low-Cost Compact Instrumentation for Blood Impedance Measurements.
IEEE Trans. Instrum. Meas., 2019

A Measurement System to Estimate the Pleural Pressure From the CVP for Respiratory System Monitoring.
IEEE Trans. Instrum. Meas., 2019

Co<sub>3</sub>O<sub>4</sub>/Al-ZnO Nano-composites: Gas Sensing Properties.
Sensors, 2019

Self-tunable chaotic true random bit generator in current-mode CMOS circuit with nonlinear distortion analysis.
Int. J. Circuit Theory Appl., 2019

Conditioning Circuit for Simultaneous Sensing and Actuation in Piezoelectric MEMS Resonators.
Proceedings of the IEEE Sensors Applications Symposium, 2019

Ion sensors: application to combustion monitoring in gas turbines.
Proceedings of the IEEE Sensors Applications Symposium, 2019

A LoRa-based IoT Sensor Node for Waste Management Based on a Customized Ultrasonic Transceiver.
Proceedings of the IEEE Sensors Applications Symposium, 2019

Smart Sensing in Mobility: a LoRaWAN Architecture for Pervasive Environmental Monitoring.
Proceedings of the 5th IEEE International forum on Research and Technology for Society and Industry, 2019

A wearable Low-cost Measurement System for Estimation of Human Exposure to Vibrations.
Proceedings of the 5th IEEE International forum on Research and Technology for Society and Industry, 2019

Analysis of a Circuit Primitive for the Reliable Design of Digital Nonlinear Oscillators.
Proceedings of the 15th Conference on Ph.D. Research in Microelectronics and Electronics, 2019

Black Powder Flow Monitoring in Pipelines by Means of Multi-Hop LoRa Networks.
Proceedings of the 2nd Workshop on Metrology for Industry 4.0 and IoT MetroInd4.0&IoT 2019, 2019

Performance Analysis of an AlN Humidity Sensor based on TiO2 nanoparticles.
Proceedings of the 5th IEEE International Symposium on Measurements & Networking, 2019

Smart Braking Material Wearout Monitoring for Part Life Assessment.
Proceedings of the International Symposium on Systems Engineering, 2019

A CMOS PUF Circuit Primitive Based on a Two-Dimensional Nonlinear Dynamical System.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2019

Piecewise Linear Chaotic Maps in Current Mode CMOS Circuits: Nonlinear Distortion Analysis.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2019

Lightweight True Random Bit Generators in PLDs: Figures of Merit and Performance Comparison.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2019

Using the I2C bus to set up Long Range Wired Sensor and Actuator Networks in Smart Buildings.
Proceedings of the 2019 4th International Conference on Computing, 2019

2018
Quartz-Crystal Microbalance Gas Sensors Based on TiO<sub>2</sub> Nanoparticles.
IEEE Trans. Instrum. Meas., 2018

Gas Sensing Properties of In<sub>2</sub>O<sub>3</sub> Nano-Films Obtained by Low Temperature Pulsed Electron Deposition Technique on Alumina Substrates.
Sensors, 2018

YCoO3 Resistive Gas Sensors for the Detection of NO2 in 'Resistance Controlled Mode'.
Proceedings of the Sensors, 2018

Low Temperature NO2 Sensor Based on YCoO3 and TiO2 Nanoparticle Composites.
Proceedings of the Sensors, 2018

Instantaneous rotation speed measurement system based on variable reluctance sensors: Model and analysis of performance.
Proceedings of the 2018 IEEE Sensors Applications Symposium, 2018

An IoT Framework for the Pervasive Monitoring of Chemical Emissions in Industrial Plants.
Proceedings of the 2018 Workshop on Metrology for Industry 4.0 and IoT, 2018

A Novel Measurement System to Estimate the Trans-Pulmonary Pressure Exploiting the Central Venous Pressure and ECG Signals.
Proceedings of the 2018 IEEE International Symposium on Medical Measurements and Applications, 2018

A Compact System for Blood Impedance Measurements for ROS Evaluation.
Proceedings of the 2018 IEEE International Symposium on Medical Measurements and Applications, 2018

Turbomachinery Clearance Monitoring Based on Passive Variable Reluctance Magnetic Sensors.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2018

Digital Nonlinear Oscillators in PLDs: Pitfalls and Open Perspectives for a Novel Class of True Random Number Generators.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2018

A Distributed Condition Monitoring System for the Non-invasive Temperature Measurement of Heat Fluids Circulating in Turbomachinery Pipes Based on Self-Powered Sensing Nodes.
Proceedings of the Applications in Electronics Pervading Industry, Environment and Society, 2018

2017
Detection of Allergen-IgE interaction in Allergic Children Through Combined Impedance and ROS Measurements.
IEEE Trans. Instrum. Meas., 2017

Optimization of Perovskite Gas Sensor Performance: Characterization, Measurement and Experimental Design.
Sensors, 2017

An Unconventional Type of Measurement with Chemoresistive Gas Sensors Exploiting a Versatile Measurement System.
Proceedings of the New Generation of CAS, 2017

Target measurements influence on level crossing detection system safety assessment.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

Quartz crystal microbalance sensors based on TiO2 nanoparticles for gas sensing.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

A lightweight digital system for the probabilistic characterization of true random bit generators.
Proceedings of the 2017 European Conference on Circuit Theory and Design, 2017

Multi-sensors Exhaust Gas Emission Monitoring System for Industrial Applications.
Proceedings of the Applications in Electronics Pervading Industry, Environment and Society, 2017

2016
A Smart Measurement System With Improved Low-Frequency Response to Detect Moving Charged Debris.
IEEE Trans. Instrum. Meas., 2016

Availability and reliability modeling of multicore controlled UPS for datacenter applications.
Reliab. Eng. Syst. Saf., 2016

Detection of allergen-IgE interaction in allergic children through impedance measurements.
Proceedings of the IEEE Sensors Applications Symposium, 2016

Stability evaluation of YCoO3 basedperovskites used for NO2 detection.
Proceedings of the IEEE Sensors Applications Symposium, 2016

Multisensor electrostatic detection of moving charged particles.
Proceedings of the IEEE Sensors Applications Symposium, 2016

Pervasive Wireless Sensor Networks for the Monitoring of Large Monumental Structures: The Case of the Ancient City Walls of Siena.
Proceedings of the Digital Heritage. Progress in Cultural Heritage: Documentation, Preservation, and Protection, 2016

2015
Assessment and Optimization for Novel Gas Materials Through the Evaluation of Mixed Response Surface Models.
IEEE Trans. Instrum. Meas., 2015

Fault tolerant design of a field data modular readout architecture for railway applications.
Reliab. Eng. Syst. Saf., 2015

Hidden Markov Models approach used for life parameters estimations.
Reliab. Eng. Syst. Saf., 2015

A system for the dynamic response characterization of turbomachinery tip clearance measurement instruments based on capacitive probes.
Proceedings of the IEEE Sensors Applications Symposium, 2015

Theoretical modeling of an electrostatic Gas-Path debris detection system with experimental validation.
Proceedings of the IEEE Sensors Applications Symposium, 2015

Gas turbine sensor loop availability driven fall back strategies design.
Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

A heuristic reliable model for guarded capacitive sensors to measure displacements.
Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

High performance liquid chromatography LCC analysis.
Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

2014
Exhaust Thermoelements Redundant Strategy to Improve Temperature Reading Reliability and Serviceability.
Proceedings of the SMARTGREENS 2014, 2014

A new wireless interface for resistive chemical sensors.
Proceedings of the IEEE 11th International Multi-Conference on Systems, Signals & Devices, 2014

HMM used for component parameters apportionment.
Proceedings of the IEEE 11th International Multi-Conference on Systems, Signals & Devices, 2014

2013
Measurement of Angular Vibrations in Rotating Shafts: Effects of the Measurement Setup Nonidealities.
IEEE Trans. Instrum. Meas., 2013

Availability modeling of a safe communication system for rolling stock applications.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Versatile measurement system for the characterization of gas sensing materials.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Surface state model for metal oxide p-type conductometric CO sensors.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

2012
Performance Analysis of Digital Sliding Mode Controlled Inverters.
Proceedings of the SMARTGREENS 2012 - Proceedings of the 1st International Conference on Smart Grids and Green IT Systems, Porto, Portugal, 19, 2012

2011
Design, Modeling, and Test of a System for Atmospheric Electric Field Measurement.
IEEE Trans. Instrum. Meas., 2011

2009
Model and Experimental Characterization of the Dynamic Behavior of Low-Power Carbon Monoxide MOX Sensors Operated With Pulsed Temperature Profiles.
IEEE Trans. Instrum. Meas., 2009

A two electrode C-NiO Nafion amperometric sensor for NO<sub>2</sub> detection.
Microelectron. J., 2009

2006
Surface State Model for Conductance Responses During Thermal-Modulation of SnO <sub>2</sub> -Based Thick Film Sensors: Part II - Experimental Verification.
IEEE Trans. Instrum. Meas., 2006

2005
Automated selection of test frequencies for fault diagnosis in analog electronic circuits.
IEEE Trans. Instrum. Meas., 2005

2002
SBT soft fault diagnosis in analog electronic circuits: a sensitivity-based approach by randomized algorithms.
IEEE Trans. Instrum. Meas., 2002

Pseudo Time-Variant parameters in centrifugal compressor availability studies by means of Markov models.
Microelectron. Reliab., 2002

A reliability study for a submarine compression application.
Microelectron. Reliab., 2002


  Loading...