Marco Laracca

According to our database, Marco Laracca authored at least 44 papers between 2004 and 2024.

Collaborative distances:

• Dijkstra number of five.
• Erdős number of five.

2024

BLE-Based Indoor Localization: Analysis of Some Solutions for Performance Improvement.

Filippo Milano, Helbert da Rocha, Marco Laracca, Luigi Ferrigno, António Espírito-Santo, José A. C. Salvado, Vincenzo Paciello

Sensors, January, 2024

An Eddy Current Probe for the Detection of Subsuperficial Defects of Any Orientation.

Federico Carere, Alessandro Sardellitti, Andrea Bernieri, Luigi Ferrigno, Silvia Sangiovanni, Marco Laracca

IEEE Trans. Instrum. Meas., 2024

Multi-Parameter Estimation by combining Dimensional Analysis and Eddy Current Testing.

Alessandro Sardellitti, Vincenzo Mottola, Filippo Milano, Luigi Ferrigno, Antonello Tamburrino, Marco Laracca

Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024

Performance Enhancement of Graphene-Based Biopotential Electrodes through Electrical Contact Geometry Optimization.

Babar Ali, Umar Farooq, Marco Laracca, Hossein Cheraghi Bidsorkhi, Alessandro Gioseppe D'Aloia, Maria Sabrina Sarto

Proceedings of the 2024 IEEE International Symposium on Measurements & Networking (M&N), 2024

A Method to Design Open Loop Current Transducers for Busbar Applications.

Federico Carere, Marco Laracca, Davide Saccavini, Silvia Sangiovanni

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

Assessing Impact of Uncertainty on a Decision Support System for Flexibility Exploitation in a Distribution Network.

Tommaso Bragatto, Federico Carere, Alberto Geri, Marco Laracca, Parastou Poursoltan, Silvia Sangiovanni

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

Novel Approach for Battery State of Charge Evaluation through Inductive Sensing.

Carmine Bourelly, Filippo Milano, Luigi Ferrigno, Marco Laracca, Gui Yun Tian

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

2023

A Non-Invasive Technique for Long-Term Monitoring of Gastroesophageal Reflux - A Pilot Study.

Marco Laracca, Gianfranco Miele, Luca Podestà, Silvia Sangiovanni

Sensors, December, 2023

An Eddy-Current Testing Method for Measuring the Thickness of Metallic Plates.

Alessandro Sardellitti, Filippo Milano, Marco Laracca, Salvatore Ventre, Luigi Ferrigno, Antonello Tamburrino

IEEE Trans. Instrum. Meas., 2023

An Analytical Model for Lithium-Ion Batteries Based on Genetic Programming Approach.

Filippo Milano, Giulia Di Capua, Nunzio Oliva, Francesco Porpora, Carmine Bourelly, Luigi Ferrigno, Marco Laracca

Proceedings of the IEEE International Workshop on Metrology for Automotive, 2023

A test bed for in-laboratory calibration of optical-based speedometers.

Andrea Bernieri, G. Iannitti, Marco Laracca, Gianfranco Miele, Silvia Sangiovanni

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

2022

A Fast ECT Measurement Method for the Thickness of Metallic Plates.

Alessandro Sardellitti, Giulia Di Capua, Marco Laracca, Antonello Tamburrino, Salvatore Ventre, Luigi Ferrigno

IEEE Trans. Instrum. Meas., 2022

UWB-Based Indoor Localization: How to Optimally Design the Operating Setup?

Gianni Cerro, Luigi Ferrigno, Marco Laracca, Gianfranco Miele, Filippo Milano, Valentina Pingerna

IEEE Trans. Instrum. Meas., 2022

Use of Magnetic Positioning Systems in Industrial and Biomedical Applications.

Andrea Bernieri, Gianni Cerro, Luigi Ferrigno, Marco Laracca, Filippo Milano

IEEE Instrum. Meas. Mag., 2022

Performance comparison in Ultra Wide Band positioning in sensor networks: least square minimization versus grid search approach.

Luigi Ferrigno, Filippo Milano, Valentina Pingerna, Gianni Cerro, Marco Laracca

Proceedings of the IEEE International Symposium on Measurements & Networking, 2022

2021

Magnetic Localization System for Short-Range Positioning: A Ready-to-Use Design Tool.

Luigi Ferrigno, Marco Laracca, Filippo Milano, Gianni Cerro, Paolo Bellitti, Mauro Serpelloni, Oscar Casas Piedrafita

IEEE Trans. Instrum. Meas., 2021

Analysis of the Uncertainty Contributions for on Board Vehicle Speed Meters Calibration Method.

Luigi Ferrigno, Marco Laracca, Adolfo Martucci, Gianfranco Miele, Silvia Sangiovanni

Proceedings of the IEEE International Workshop on Metrology for Automotive, 2021

On the Power Consumption of a Bluetooth Device Operating in Beacon Mode.

Luigi Ferrigno, Filippo Milano, António Espírito-Santo, José A. C. Salvado, Marco Laracca, Vincenzo Paciello

Proceedings of the IECON 2021, 2021

A UWB-based localization system: analysis of the effect of anchor positions and robustness enhancement in indoor environments.

Luigi Ferrigno, Gianfranco Miele, Filippo Milano, Valentina Pingerna, Gianni Cerro, Marco Laracca

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

2020

On the Calibration of GNSS-Based Vehicle Speed Meters.

Adolfo Martucci, Giovanni Cerasuolo, Orsola Petrella, Marco Laracca

Sensors, 2020

On a finite domain magnetic localization by means of TMR triaxial sensors.

Gianni Cerro, Luigi Ferrigno, Marco Laracca, Filippo Milano, Paolo Bellitti, Mauro Serpelloni, Oscar Casas Piedrafita

Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

2019

Eddy Current Testing Probe Based on Double-Coil Excitation and GMR Sensor.

Andrea Bernieri, Luigi Ferrigno, Marco Laracca, Antonio Rasile

IEEE Trans. Instrum. Meas., 2019

An Uncertainty Analysis for the Calibration of GNSS-Based Vehicle Speed Meters.

Adolfo Martucci, Giovanni Cerasuolo, Orsola Petrella, Marco Laracca

Proceedings of the 2nd Workshop on Metrology for Industry 4.0 and IoT MetroInd4.0&IoT 2019, 2019

2018

Fast Eddy Current Testing Defect Classification Using Lissajous Figures.

Gianni D'Angelo, Marco Laracca, Salvatore Rampone, Giovanni Betta

IEEE Trans. Instrum. Meas., 2018

Metrological Characterization of a Novel Microsensor Platform for Activated Carbon Filters Monitoring.

Gianni Cerro, Marco Ferdinandi, Luigi Ferrigno, Marco Laracca, Mario Molinara

IEEE Trans. Instrum. Meas., 2018

Calibration System for Multi-sensor Acoustical Systems.

Orsola Petrella, Giovanni Cerasuolo, Salvatore Ameduri, Vincenzo Quaranta, Marco Laracca

Proceedings of the Sensors, 2018

Improvement of the Frequency Behavior of an EC-NDT Inspection System.

Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca, Antonio Rasile

Proceedings of the Sensors, 2018

Characterization of a TMR Sensor for EC-NDT Applications.

Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca, Antonio Rasile

Proceedings of the Sensors, 2018

ECT probe improvement for in-service non-destructive testing on conductive materials.

Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca, Antonio Rasile

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

2014

An Experimental Setup for the Calibration of Acoustic Antenna.

Orsola Petrella, Salvatore Ameduri, Vincenzo Quaranta, Giovanni Betta, Marco Laracca

IEEE Trans. Instrum. Meas., 2014

Multifrequency Excitation and Support Vector Machine Regressor for ECT Defect Characterization.

Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca, Stefano Mastrostefano

IEEE Trans. Instrum. Meas., 2014

Optimized complex signals for Eddy Current Testing.

Giovanni Betta, Luigi Ferrigno, Marco Laracca, Pietro Burrascano, Marco Ricci

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

2013

Cost-Effective FPGA Instrument for Harmonic and Interharmonic Monitoring.

Giovanni Betta, Luigi Ferrigno, Marco Laracca

IEEE Trans. Instrum. Meas., 2013

Crack Depth Estimation by Using a Multi-Frequency ECT Method.

Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca

IEEE Trans. Instrum. Meas., 2013

Modelling, parametric analysis, and optimization of an experimental set-up for acoustic antenna calibration.

Orsola Petrella, Salvatore Ameduri, Vincenzo Quaranta, Giovanni Betta, Marco Laracca

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

On the suitability of compressive sampling for the measurement of electrical power quality.

Francesco Bonavolontà, Mauro D'Arco, Giacomo Ianniello, Annalisa Liccardo, Rosario Schiano Lo Moriello, Luigi Ferrigno, Marco Laracca, Gianfranco Miele

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

A novel biaxial probe implementing multifrequency excitation and SVM processing for NDT.

Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

2012

An FPGA-Based Instrument for the Estimation of R, L, and C Parameters Under Nonsinusoidal Conditions.

Luigi Ferrigno, Marco Laracca, Consolatina Liguori, Antonio Pietrosanto

IEEE Trans. Instrum. Meas., 2012

GMR-Based ECT Instrument for Detection and Characterization of Crack on a Planar Specimen: A Hand-Held Solution.

Giovanni Betta, Luigi Ferrigno, Marco Laracca

IEEE Trans. Instrum. Meas., 2012

2008

Measurement of Passive R, L, and C Components Under Nonsinusoidal Conditions: The Solution of Some Case Studies.

Luigi Ferrigno, Marco Laracca, Antonio Pietrosanto

IEEE Trans. Instrum. Meas., 2008

Crack Shape Reconstruction in Eddy Current Testing Using Machine Learning Systems for Regression.

Andrea Bernieri, Luigi Ferrigno, Marco Laracca, Mario Molinara

IEEE Trans. Instrum. Meas., 2008

2006

Reproducibility and Uncertainty of Conducted Emission Measurements for Adjustable-Speed Electrical Power Drive Characterization.

Giovanni Betta, Domenico Capriglione, Marco Laracca

IEEE Trans. Instrum. Meas., 2006

2004

An automated self-calibrated instrument for nondestructive testing on conductive materials.

Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca

IEEE Trans. Instrum. Meas., 2004

A biaxial probe for nondestructive testing on conductive materials.

Andrea Bernieri, Giovanni Betta, Luigi Ferrigno, Marco Laracca

IEEE Trans. Instrum. Meas., 2004