Luigi Ferrigno
Orcid: 0000-0002-1724-5720
According to our database1,
Luigi Ferrigno
authored at least 121 papers
between 2002 and 2024.
Collaborative distances:
Collaborative distances:
Timeline
Legend:
Book In proceedings Article PhD thesis Dataset OtherLinks
Online presence:
-
on orcid.org
On csauthors.net:
Bibliography
2024
An Overall Automated Architecture Based on the Tapping Test Measurement Protocol: Hand Dexterity Assessment through an Innovative Objective Method.
Sensors, July, 2024
BLE-Based Indoor Localization: Analysis of Some Solutions for Performance Improvement.
Sensors, January, 2024
An Eddy Current Probe for the Detection of Subsuperficial Defects of Any Orientation.
IEEE Trans. Instrum. Meas., 2024
IEEE Access, 2024
The impact of Electrical Signature Quality in NILM process: a preliminary analysis based on unsupervised approch.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024
A non-invasive measurement system for pollutant detection in oil: a preliminary analysis.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024
Multi-Parameter Estimation by combining Dimensional Analysis and Eddy Current Testing.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024
An Ad-Hoc Networked Measurement Framework to Real-Time Monitoring of Neurodegenerative Diseases.
Proceedings of the 2024 IEEE International Symposium on Measurements & Networking (M&N), 2024
Proceedings of the 2024 IEEE International Symposium on Measurements & Networking (M&N), 2024
An Electromagnetic Side-Channel-Based Security Level Detection Measurement Approach in Content Transfer Remote Mechanisms.
Proceedings of the 2024 IEEE International Symposium on Measurements & Networking (M&N), 2024
A Deep Learning System for Water Pollutant Detection Based on the SENSIPLUS Microsensor.
Proceedings of the Pattern Recognition - 27th International Conference, 2024
The Impact of Energy Measurement in Fault Detection: A Preliminary Analysis of Load Profiling Capability.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024
A Novel Energy-Based Composite Index for Assessing Motor State in Parkinson's Disease by Means of IMU-Based Digital Health Technology.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024
A Low-Cost Edge Computing Device for Real-Time Detection of Motor Symptoms in Neurodegenerative Diseases Using Machine Learning.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024
Electromagnetic Side Channel for Application Profiling in IoT Frameworks: A Comparison Between Time and Frequency Measurement Approaches.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024
Proceedings of the 14th IEEE International Workshop on Applied Measurements for Power Systems, 2024
2023
An end-to-end real-time pollutants spilling recognition in wastewater based on the IoT-ready SENSIPLUS platform.
J. King Saud Univ. Comput. Inf. Sci., January, 2023
Load Profile Analysis in Electrical Systems: The Impact of Electrical Signature and Monitoring Quality in the Energy Digitalization Process.
IEEE Trans. Instrum. Meas., 2023
IEEE Trans. Instrum. Meas., 2023
A Measurement Approach for Inline Intrusion Detection of Heartbleed-Like Attacks in IoT Frameworks.
IEEE Trans. Instrum. Meas., 2023
Objective Evaluation of Coordinative Abilities and Training Effectiveness in Sports Scenarios: An Automated Measurement Protocol.
IEEE Access, 2023
EIS-Based SoC Estimation: A Novel Measurement Method for Optimizing Accuracy and Measurement Time.
IEEE Access, 2023
A Statistical Approach for Electrochemical Impedance Spectroscopy Analysis on LFP Batteries' State of Charge.
Proceedings of the 2023 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2023
Experimental Analysis of Side-Channel Emissions for IoT Devices Activities' Profiling.
Proceedings of the 2023 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2023
Proceedings of the IEEE International Workshop on Metrology for Automotive, 2023
Motor abilities analysis using a standardized tapping test enhanced by a detailed processing stage: gender and age comparison.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2023
Enhancing remote monitoring and classification of motor state in Parkinson's disease using Wearable Technology and Machine Learning.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2023
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023
2022
IEEE Trans. Instrum. Meas., 2022
IEEE Trans. Instrum. Meas., 2022
Evolutionary Computation to Implement an IoT-Based System for Water Pollution Detection.
SN Comput. Sci., 2022
Sensors, 2022
Sensors, 2022
IEEE Instrum. Meas. Mag., 2022
eLAMI - An Innovative Simulated Dataset of Electrical Loads for Advanced Smart Energy Applications.
IEEE Access, 2022
A new Dataset for Detection of Illegal or Suspicious Spilling in Wastewater through Low-cost Real-time Sensors.
Proceedings of the 2022 IEEE International Conference on Smart Computing, 2022
An Open Source C Code Generator and a Tiny Machine Learning Toolchain for the SENSIPLUS Platform.
Proceedings of the 2022 IEEE International Conference on Smart Computing, 2022
Parkinson's disease aided diagnosis: online symptoms detection by a low-cost wearable Inertial Measurement Unit.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2022
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2022
Performance comparison in Ultra Wide Band positioning in sensor networks: least square minimization versus grid search approach.
Proceedings of the IEEE International Symposium on Measurements & Networking, 2022
Proceedings of the IEEE International Symposium on Measurements & Networking, 2022
Proceedings of the Sensors and Microsystems, 2022
2021
Electrical Impedance Spectroscopy for Real-Time Monitoring of the Life Cycle of Graphene Nanoplatelets Filters for Some Organic Industrial Pollutants.
IEEE Trans. Instrum. Meas., 2021
Magnetic Localization System for Short-Range Positioning: A Ready-to-Use Design Tool.
IEEE Trans. Instrum. Meas., 2021
Parkinson's Disease Patient Monitoring: A Real-Time Tracking and Tremor Detection System Based on Magnetic Measurements.
Sensors, 2021
Proceedings of the IEEE International Conference on Smart Computing, 2021
Thermal ablation techniques for tumor treatment: open measurement issues from research to industry.
Proceedings of the 6th IEEE International Forum on Research and Technology for Society and Industry, 2021
Towards an IoT measurement system for Radon concentration monitoring: a preliminary proposal.
Proceedings of the 6th IEEE International Forum on Research and Technology for Society and Industry, 2021
Preliminary Sensitivity Analysis of Combinatorial Optimization (CO) for NILM Applications: Effect of the Meter Accuracy.
Proceedings of the 6th IEEE International Forum on Research and Technology for Society and Industry, 2021
Analysis of the Uncertainty Contributions for on Board Vehicle Speed Meters Calibration Method.
Proceedings of the IEEE International Workshop on Metrology for Automotive, 2021
Proceedings of the IECON 2021, 2021
A UWB-based localization system: analysis of the effect of anchor positions and robustness enhancement in indoor environments.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021
Proceedings of the Applications of Evolutionary Computation, 2021
2020
A novel PCA-based approach for building on-board sensor classifiers for water contaminant detection.
Pattern Recognit. Lett., 2020
An End to End Indoor Air Monitoring System Based on Machine Learning and SENSIPLUS Platform.
IEEE Access, 2020
Proceedings of the IEEE International Conference on Smart Computing, 2020
A real-time tracking system for tremor and trajectory estimation in Parkinson's disease affected patients.
Proceedings of the 2020 IEEE International Symposium on Medical Measurements and Applications, 2020
Multi-Frequency Signal for Saturation Detection of a Pollution Filter Based on Graphene Nanoplatelets.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020
2019
Effects of Real Instrument on Performance of an Energy Detection-Based Spectrum Sensing Method.
IEEE Trans. Instrum. Meas., 2019
IEEE Trans. Instrum. Meas., 2019
Contaminants detection and classification through a customized IoT-based platform: A case study.
IEEE Instrum. Meas. Mag., 2019
The Effect of Hardware/Software Features on the Performance of an Open-Source Network Emulator.
Proceedings of the Wired/Wireless Internet Communications, 2019
Proceedings of the IEEE International Conference on Smart Computing, 2019
A fine-grained controlled set-up to execute time synchronization protocol tests in a distributed environment.
Proceedings of the 2nd Workshop on Metrology for Industry 4.0 and IoT MetroInd4.0&IoT 2019, 2019
Proceedings of the 5th IEEE International Symposium on Measurements & Networking, 2019
2018
Metrological Characterization of a Novel Microsensor Platform for Activated Carbon Filters Monitoring.
IEEE Trans. Instrum. Meas., 2018
Proceedings of the Wired/Wireless Internet Communications, 2018
Proceedings of the 2018 IEEE International Conference on Smart Computing, 2018
Proceedings of the Sensors, 2018
Proceedings of the Sensors, 2018
Proceedings of the 2018 Workshop on Metrology for Industry 4.0 and IoT, 2018
The effect of ADC vertical resolution on the performance of an energy detection algorithm in cognitive radios.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018
ECT probe improvement for in-service non-destructive testing on conductive materials.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018
2017
Preliminary realization of a monitoring system of activated carbon filter RLI based on the SENSIPLUS® microsensor platform.
Proceedings of the IEEE International Workshop on Measurement and Networking, 2017
Proceedings of the IEEE International Workshop on Measurement and Networking, 2017
Proceedings of the IEEE International Workshop on Measurement and Networking, 2017
Analysis of different wavelet segmentation methods for frequency-domain energy detection based spectrum sensing.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017
2016
Analysis and implementation of a wavelet based spectrum sensing method for low SNR scenarios.
Proceedings of the 17th IEEE International Symposium on A World of Wireless, 2016
Improving the Performance of an AMR-Based Current Transducer for Metering Applications.
Proceedings of the Sensors, 2016
Employment of software defined radios for dual-use in distributed spectrum monitoring system.
Proceedings of the 2nd IEEE International Forum on Research and Technologies for Society and Industry Leveraging a better tomorrow, 2016
Measurement of the IP Packet Delay Variation for a reliable estimation of the mean opinion score in VoIP services.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2016
2015
Use of frequency diversity to improve the performance of RSSI-based distance measurements.
Proceedings of the IEEE International Workshop on Measurements & Networking, 2015
A dual step energy detection based spectrum sensing algorithm for cognitive vehicular ad hoc networks.
Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015
2014
Multifrequency Excitation and Support Vector Machine Regressor for ECT Defect Characterization.
IEEE Trans. Instrum. Meas., 2014
Cooperative and self organizing paradigm for wide area synchronized monitoring of Smart Grids: Performance analysis in real operating scenarios.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014
Proposal and analysis of new algorithms for wideband spectrum sensing in cognitive radio.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014
2013
IEEE Trans. Instrum. Meas., 2013
IEEE Trans. Instrum. Meas., 2013
An Internet Protocol Packet Delay Variation Estimator for Reliable Quality Assessment of Video-Streaming Services.
IEEE Trans. Instrum. Meas., 2013
Time synchronization based on linear regression in low cost WSNs: A performance analysis.
Proceedings of the 2nd IEEE International Workshop on Measurements & Networking, 2013
Quality assessment of VoIP services: A proposal based on the measurement of the IP Packet Delay Variation.
Proceedings of the 2nd IEEE International Workshop on Measurements & Networking, 2013
On the performance of consensus protocols for decentralized smart grid metering in presence of measurement uncertainty.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013
On the suitability of compressive sampling for the measurement of electrical power quality.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013
A novel biaxial probe implementing multifrequency excitation and SVM processing for NDT.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013
2012
An FPGA-Based Instrument for the Estimation of R, L, and C Parameters Under Nonsinusoidal Conditions.
IEEE Trans. Instrum. Meas., 2012
GMR-Based ECT Instrument for Detection and Characterization of Crack on a Planar Specimen: A Hand-Held Solution.
IEEE Trans. Instrum. Meas., 2012
A Methodological Approach for Estimating Protocol Analyzer Instrumental Measurement Uncertainty in Packet Jitter Evaluation.
IEEE Trans. Instrum. Meas., 2012
2011
Experimental Characterization of Synchronization Protocols for Instrument Wireless Interface.
IEEE Trans. Instrum. Meas., 2011
Proceedings of the IEEE International Workshop on Measurement and Networking, 2011
2010
IEEE Trans. Instrum. Meas., 2010
IEEE Trans. Instrum. Meas., 2010
2009
Power Measurement in DVB-T Systems: On the Suitability of Parametric Spectral Estimation in DSP-Based Meters.
IEEE Trans. Instrum. Meas., 2009
2008
Measurement of Passive R, L, and C Components Under Nonsinusoidal Conditions: The Solution of Some Case Studies.
IEEE Trans. Instrum. Meas., 2008
Experimental Investigation of the Electromagnetic Interference of ZigBee Transmitters on Measurement Instruments.
IEEE Trans. Instrum. Meas., 2008
Crack Shape Reconstruction in Eddy Current Testing Using Machine Learning Systems for Regression.
IEEE Trans. Instrum. Meas., 2008
Power Measurements in DVB-T Systems: New Proposal for Enhancing Reliability and Repeatability.
IEEE Trans. Instrum. Meas., 2008
Proceedings of the IEEE International Conference on Virtual Environments, 2008
2007
Proceedings of the IEEE International Conference on Virtual Environments, 2007
2006
IEEE Trans. Instrum. Meas., 2006
2005
IEEE Trans. Instrum. Meas., 2005
Balancing computational and transmission power consumption in wireless image sensor networks.
Proceedings of the IEEE International Conference on Virtual Environments, 2005
2004
An automated self-calibrated instrument for nondestructive testing on conductive materials.
IEEE Trans. Instrum. Meas., 2004
IEEE Trans. Instrum. Meas., 2004
2003
IEEE Trans. Instrum. Meas., 2003
2002
Measurements for the characterization of passive components in non-sinusoidal conditions.
IEEE Trans. Instrum. Meas., 2002
IEEE Trans. Instrum. Meas., 2002