Luca De Vito

Orcid: 0000-0003-1896-2614

According to our database1, Luca De Vito authored at least 87 papers between 2005 and 2024.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2024
Technical Committee 10: Recent Progress.
IEEE Instrum. Meas. Mag., October, 2024

The Uncertainty Assessment by the Monte Carlo Analysis of NDVI Measurements Based on Multispectral UAV Imagery.
Sensors, May, 2024

From Pixels to Precision: A Survey of Monocular Visual Odometry in Digital Twin Applications.
Sensors, February, 2024

A Compressed-Sensing System for Radio Spectrum Monitoring and Localization of Noncooperative Sources.
IEEE Trans. Instrum. Meas., 2024

IoT-Based System for Monitoring the Well-Being of Industrial Operators Through Wearable Devices.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2024

Assessment of a Bioimpedance Analog Front-End for Blood Pulse Wave Detection.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2024

Two-Wire Cable Anomaly Diagnosis with Machine Learning Based on Passive Measurements.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

An Improved Compressed Sensing-Based Method for Anomaly Detection in Cables Using Spread Spectrum Signals.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

2023
Over the Limits of Traditional Sampling: Advantages and Issues of AICs for Measurement Instrumentation.
Sensors, January, 2023

On the Effects of PRBS Non-Idealities in Signal Reconstruction from AICs.
IEEE Trans. Instrum. Meas., 2023

Measurement System for Operator 5.0: a Learning Fatigue Recognition based on sEMG Signals.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2023

Assessment of Sparse Fourier Transform for Spectral Measurements.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

2022
The IEEE Technical Committee 10-The Waveform Generation, Measurement, and Analysis Committee: Update 2021.
IEEE Instrum. Meas. Mag., 2022

The Jitter Measurement Ways: The Instrumentation.
IEEE Instrum. Meas. Mag., 2022

A prototype of a wearable health device for mobile telemonitoring applications.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2022

A CS-based acquisition method of acoustic emission signals from distributed SHM systems.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

ST-Segment Anomalies Detection from Compressed Sensing Based ECG Data by Means of Machine Learning.
Proceedings of the Biomedical Engineering Systems and Technologies, 2022

2021
A Dictionary Optimization Method for Reconstruction of ECG Signals after Compressed Sensing.
Sensors, 2021

ECG Monitoring Based on Dynamic Compressed Sensing of Multi-Lead Signals.
Sensors, 2021

Sensors and Measurements for UAV Safety: An Overview.
Sensors, 2021

Sensors and Measurements for Unmanned Systems: An Overview.
Sensors, 2021

The IEEE Technical Committee 10: The Waveform Generation, Measurement, and Analysis Committee.
IEEE Instrum. Meas. Mag., 2021

Guidelines for an Unmanned Aerial Vehicle-Based Measurement Instrument Design.
IEEE Instrum. Meas. Mag., 2021

An undershirt for monitoring of multi-lead ECG and respiration wave signals.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2021

Impact of reconstruction algorithms on dynamic ECG compressed sensing.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2021

Deterministic Compressed Sensing of heart sound signals.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2021

Compressive Sampling on RFSoC for Distributed Wideband RF Spectrum Measurements.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

Multi-class Detection of Arrhythmia Conditions Through the Combination of Compressed Sensing and Machine Learning.
Proceedings of the Biomedical Engineering Systems and Technologies, 2021

Morphological Classification of Heartbeats in Compressed ECG.
Proceedings of the 14th International Joint Conference on Biomedical Engineering Systems and Technologies, 2021

2020
A Compressive Sampling-Based Channel Estimation Method for Network Visibility Instrumentation.
IEEE Trans. Instrum. Meas., 2020

A Method Exploiting Compressive Sampling for Localization of Radio Frequency Emitters.
IEEE Trans. Instrum. Meas., 2020

The documentary standards of the IEEE technical committee 10.
IEEE Instrum. Meas. Mag., 2020

The jitter measurement ways: The jitter decomposition.
IEEE Instrum. Meas. Mag., 2020

A New Method for Dictionary Matrix Optimization in ECG Compressed Sensing.
Proceedings of the 2020 IEEE International Symposium on Medical Measurements and Applications, 2020

Identification of R-peak occurrences in compressed ECG signals.
Proceedings of the 2020 IEEE International Symposium on Medical Measurements and Applications, 2020

A Dynamic Approach for Compressed Sensing of Multi-lead ECG Signals.
Proceedings of the 2020 IEEE International Symposium on Medical Measurements and Applications, 2020

A TDoA-based Measurement Method for RF Emitters Localization by Exploiting Wideband Compressive Sampling.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

A Novel CS-based Measurement Method for Impairments Identification in Wireline Channels.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

A Bandpass Sampling Scheme Based on Asynchronous Time Interleaving.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

MIPHAS: Military Performances and Health Analysis System.
Proceedings of the 13th International Joint Conference on Biomedical Engineering Systems and Technologies (BIOSTEC 2020), 2020

Technologies for Motion Measurements in Connected Health Scenario.
Proceedings of the Connected Health in Smart Cities, 2020

2019
Hardware Security in IoT era: the Role of Measurements and Instrumentation.
Proceedings of the 2nd Workshop on Metrology for Industry 4.0 and IoT MetroInd4.0&IoT 2019, 2019

IoT System for Remote Monitoring of Bridges: Measurements for Structural Health and Vehicular Traffic Load.
Proceedings of the 2nd Workshop on Metrology for Industry 4.0 and IoT MetroInd4.0&IoT 2019, 2019

A Novel Method for Compressed Sensing based Sampling of ECG Signals in Medical-IoT era.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2019

Oscillometric blood pressure waveform analysis: challenges and developments.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2019

The architecture of an innovative smart T-shirt based on the Internet of Medical Things paradigm.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2019

Wireline channel estimation by compressive sampling for physical layer testing.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

Localization of radio emitters by wideband compressive sampling.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

2018
Special Section on IEEE MeMeA 2017.
IEEE Trans. Instrum. Meas., 2018

A Cyclostationarity-Based Method for Jitter Measurement in Waveform Recorders.
IEEE Trans. Instrum. Meas., 2018

A Survey of Measurement Applications Based on IoT.
Proceedings of the 2018 Workshop on Metrology for Industry 4.0 and IoT, 2018

Haptics Enhanced Interface for Remote Control of Measurement Instrumentation.
Proceedings of the 2018 IEEE International Symposium on Medical Measurements and Applications, 2018

Assessment of analog-to-information converters based on non-uniform sampling for spectrum analysis.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

Monitoring the magnetic axis misalignment in axially-symmetric magnets.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

Experimental analysis for the optimal choice of high-order modes couplers design parameters for resonance damping.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

2017
Guest Editorial Medical Measurements and Applications: 10 Years of Ideas and Innovation.
IEEE Trans. Instrum. Meas., 2017

Analog-to-information converters in the wideband rf measurement for aerospace applications: current situation and perspectives.
IEEE Instrum. Meas. Mag., 2017

DronesBench: an innovative bench to test drones.
IEEE Instrum. Meas. Mag., 2017

An IoT-enabled multi-sensor multi-user system for human motion measurements.
Proceedings of the 2017 IEEE International Symposium on Medical Measurements and Applications, 2017

Method for compensating the effect of disturbances on magnetometer measurements: experimental results.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

Measurement science and education in the drone times.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

Experimental characterization of a RF mixer for wideband data acquisition systems.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

2016
Medical Measurements: A Need and a Challenge.
IEEE Trans. Instrum. Meas., 2016

A Novel Method for Phase Noise Measurement Based on Cyclic Complementary Autocorrelation.
IEEE Trans. Instrum. Meas., 2016

A method for real-time compensation of magnetometers embedded on smartphones.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2016

Power consumption analysis of a Wireless Sensor Network for road safety.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2016

2015
Compensating magnetic disturbances on MARG units by means of a low complexity data fusion algorithm.
Proceedings of the 2015 IEEE International Symposium on Medical Measurements and Applications, 2015

Investigating the on-board data processing for IMU-based sensors in motion tracking for rehabilitation.
Proceedings of the 2015 IEEE International Symposium on Medical Measurements and Applications, 2015

An extension to IEEE Std. 1241 sine fit for analog-to-information converters testing.
Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

2014
Measurements and sensors for motion tracking in motor rehabilitation.
IEEE Instrum. Meas. Mag., 2014

Experimental comparison of orientation estimation algorithms in motion tracking for rehabilitation.
Proceedings of the 2014 IEEE International Symposium on Medical Measurements and Applications, 2014

Network design and characterization of a Wireless Active Guardrail System.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

2013
A Histogram-Based Segmentation Method for Wideband Spectrum Sensing in Cognitive Radios.
IEEE Trans. Instrum. Meas., 2013

Validation of a home rehabilitation system for range of motion measurements of limb functions.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2013

A wireless-based home rehabilitation system for monitoring 3D movements.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2013

Wireless active guardrail for traffic safety: Preliminary tests of speed and proximity measurement.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Jitter and its relatives: A critical overview.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

2012
Estimating the Uncertainty in the Frequency Domain Characterization of Digitizing Waveform Recorders.
IEEE Trans. Instrum. Meas., 2012

2011
Spectrum segmentation for wideband sensing of radio signals.
Proceedings of the IEEE International Workshop on Measurement and Networking, 2011

2010
Prototype of an Automatic Digital Modulation Classifier Embedded in a Real-Time Spectrum Analyzer.
IEEE Trans. Instrum. Meas., 2010

2009
Session Initiation Protocol Automatic Debugger.
IEEE Trans. Instrum. Meas., 2009

2008
One-Way Delay Measurement: State of the Art.
IEEE Trans. Instrum. Meas., 2008

An Improved ADC-Error-Correction Scheme Based on a Bayesian Approach.
IEEE Trans. Instrum. Meas., 2008

2007
Bayesian Calibration of a Lookup Table for ADC Error Correction.
IEEE Trans. Instrum. Meas., 2007

An Automatic Digital Modulation Classifier for Measurement on Telecommunication Networks.
IEEE Trans. Instrum. Meas., 2007

2006
An improved method for classification and metrological characterization of disturbances on QAM signals.
IEEE Trans. Instrum. Meas., 2006

2005
A 3-D baseband signal analyzer prototype for 3G mobile telecommunication systems.
IEEE Trans. Instrum. Meas., 2005


  Loading...