Lorenzo Ciani

Cristian Garzón Alfonso

Leandro Calandroni

Alessandro Bartolini

Libero Paolucci

Sensors, September, 2024

Temperature Sensitivity Analysis of Inertial Measurement Unit Under Dynamic Conditions.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2024

Considerations on the Electrode-Spacing-to-Electrode-Diameter Ratio in Electrical Resistivity Tomography (ERT): An Operational Approach.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2024

Experimental Characterization of Hybrid Supercapacitor Under Different Operating Conditions Using EIS Measurements.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2024

Equivalent Circuit Modelling of Hybrid Supercapacitors Through Experimental Spectroscopic Measurements.

[BibT_eX]

[DOI]

Gabriele Maria Lozito

IEEE Access, 2024

Life Cycle Analysis of Lithium Batteries for Smart Grids using Electrochemical Impedance Spectroscopy Data.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024

Lithium-ion battery dataset for data driven models' development.

[BibT_eX]

[DOI]

Maurizio Spadavecchia

Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024

Introduction to clustering unsupervised machine learning algorithms applied to power quality disturbances.

[BibT_eX]

[DOI]

Cristian Garzón Alfonso

Libero Paolucci

Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024

Power Quality Meter based on Low-Cost Smart Platform.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024

Characterization of $\text{LiFePO}_{4}$ Cells for Formula SAE's Driverless Vehicle Using Climate Tests.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Workshop on Metrology for Automotive, 2024

Impedance Analysis of Hybrid Supercapacitor using EIS under Temperature and SOC Variable Conditions.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

Prediction of Li-Ion Battery State-of-Health Based on Data-Driven Approach.

[BibT_eX]

[DOI]

Maurizio Spadavecchia

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

Dynamic Temperature Test of Gyroscope for Automotive Applications.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

State of Health Prediction of Batteries for Smart Energy Grids Based on Multiple Features.

[BibT_eX]

[DOI]

Cristian Garzón Alfonso

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

Remaining Useful Life estimation for MEMS-based transducers.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

2023

Analysis of Inertial Measurement Units Performances Under Dynamic Conditions.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2023

A Novel Methodology for Unsupervised Anomaly Detection in Industrial Electrical Systems.

[BibT_eX]

[DOI]

Marco Carratù

Vincenzo Gallo

Salvatore Dello Iacono

IEEE Trans. Instrum. Meas., 2023

Fuzzy-Based Approach to Solve Classical Risk Priority Number Drawbacks for Railway Signaling Systems.

[BibT_eX]

[DOI]

IEEE Intell. Transp. Syst. Mag., 2023

A Multi-Channel Deep-Learning Prediction Algorithm for Battery State-of-Health Indicator.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Conference on Metrology for eXtended Reality, 2023

Temperature Sensitivity Analysis of a Power Quality Meter Using Thermal Step Test.

[BibT_eX]

[DOI]

Proceedings of the 2023 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2023

Exponential degradation model for Remaining Useful Life estimation of electrolytic capacitors.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Workshop on Metrology for Automotive, 2023

Improving Power Quality measurements using deep learning for disturbance classification.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

An experimental setup for characterization of Inertial measurement unit under dynamic conditions.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

Anomaly Detection on Industrial Electrical Systems using Deep Learning.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

Experimental analysis for the estimation of the Arrhenius's activation energy of lithium batteries.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

2022

Electrical Characterization Under Harsh Environment of DC-DC Converters Used in Diagnostic Systems.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2022

A Virtual Soil Moisture Sensor for Smart Farming Using Deep Learning.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2022

An Innovative Single Shot Power Quality Disturbance Detector Algorithm.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2022

Stress Testing for Performance Analysis of Orientation Estimation Algorithms.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2022

Model-Based Power Management for Smart Farming Wireless Sensor Networks.

[BibT_eX]

[DOI]

Fabio Corti

Antonino Laudani

Gabriele Maria Lozito

Alessandro Bartolini

IEEE Trans. Circuits Syst. I Regul. Pap., 2022

Technical Committee on Fault Tolerant Measurement Systems.

[BibT_eX]

[DOI]

Ye Chow Kuang

Melanie Ooi

IEEE Instrum. Meas. Mag., 2022

Reliability Prediction of an innovative Power Quality Meter.

[BibT_eX]

[DOI]

Alessandro Bartolini

Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2022

Remaining Useful Life estimation for electric vehicle batteries using a similarity-based approach.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Workshop on Metrology for Automotive, 2022

Validation of RUL estimation method for battery prognostic under different fast-charging conditions.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

Analysis of non-ideal remote pole in Electrical Resistivity Tomography for subsurface surveys.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

Temperature stress tests on low-cost IMU systems: Analysis and first proposal for enhancing performance.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

2021

Comparing the Effects of GPS Error on Different Electrical Resistivity Tomography Arrays for Archeological Investigations.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2021

Remaining Useful Life Estimation for Prognostics of Lithium-Ion Batteries Based on Recurrent Neural Network.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2021

Experimental Analysis of Filtering Algorithms for IMU-Based Applications Under Vibrations.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2021

Ultra-Wideband Radar-Based Indoor Activity Monitoring for Elderly Care.

[BibT_eX]

[DOI]

Sensors, 2021

Reliability Analysis of Wireless Sensor Network for Smart Farming Applications.

[BibT_eX]

[DOI]

Sensors, 2021

An enhanced SHERPA (E-SHERPA) method for human reliability analysis in railway engineering.

[BibT_eX]

[DOI]

Reliab. Eng. Syst. Saf., 2021

Improving Human Reliability Analysis for Railway Systems Using Fuzzy Logic.

[BibT_eX]

[DOI]

IEEE Access, 2021

FMECA Assessment for Railway Safety-Critical Systems Investigating a New Risk Threshold Method.

[BibT_eX]

[DOI]

IEEE Access, 2021

Reliability Analysis of diagnostic system for Condition Monitoring of industrial plant.

[BibT_eX]

[DOI]

Proceedings of the 6th IEEE International Forum on Research and Technology for Society and Industry, 2021

Accelerated Testing and Reliability estimation of electronic boards for automotive applications.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Workshop on Metrology for Automotive, 2021

Reliability Allocation: an iterative approach for complex systems.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Symposium on Systems Engineering, 2021

Reliability and Functional Analysis of IMU systems under temperature-based stress tests.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

Effects of inaccurate electrode positioning in subsurface resistivity measurements for archeological purposes.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

2020

Influence of Raised Ambient Temperature on a Sensor Node Using Step-Stress Test.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2020

Optimizing Maintenance Policies for a Yaw System Using Reliability-Centered Maintenance and Data-Driven Condition Monitoring.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2020

Analysis of the Influence of the GPS Errors Occurred While Collecting Electrode Coordinates on the Electrical Resistivity of Tumuli.

[BibT_eX]

[DOI]

Sensors, 2020

Risk Assessment of a Wind Turbine: A New FMECA-Based Tool With RPN Threshold Estimation.

[BibT_eX]

[DOI]

IEEE Access, 2020

Reliability evaluation of an HVAC ventilation system with FTA and RBD analysis.

[BibT_eX]

[DOI]

Maria Cristina Piccirilli

Diego Galar

Proceedings of the IEEE International Symposium on Systems Engineering, 2020

Characterization of a low-cost and low-power environmental monitoring system.

[BibT_eX]

[DOI]

Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

Characterization of Inertial Measurement Units under Environmental Stress Screening.

[BibT_eX]

[DOI]

Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

2019

MLMVNNN for Parameter Fault Detection in PWM DC-DC Converters and Its Applications for Buck and Boost DC-DC Converters.

[BibT_eX]

[DOI]

Antonio Luchetta

Stefano Manetti

IEEE Trans. Instrum. Meas., 2019

RBD Model-Based Approach for Reliability Assessment in Complex Systems.

[BibT_eX]

[DOI]

IEEE Syst. J., 2019

Future trends in I&M: Diagnostics, maintenance and condition monitoring for cyber-physical systems.

[BibT_eX]

[DOI]

IEEE Instrum. Meas. Mag., 2019

A Critical Comparison of Alternative Risk Priority Numbers in Failure Modes, Effects, and Criticality Analysis.

[BibT_eX]

[DOI]

IEEE Access, 2019

Condition-based Maintenance for Oil&Gas system basing on Failure Modes and Effects Analysis.

[BibT_eX]

[DOI]

Proceedings of the 5th IEEE International forum on Research and Technology for Society and Industry, 2019

Standby Redundancy for Reliability Improvement of Wireless Sensor Network.

[BibT_eX]

[DOI]

Proceedings of the 5th IEEE International forum on Research and Technology for Society and Industry, 2019

A novel layered approach to evaluate reliability of complex systems.

[BibT_eX]

[DOI]

Proceedings of the 5th IEEE International forum on Research and Technology for Society and Industry, 2019

Reliability improvement of wind turbine control system based on standby redundancy.

[BibT_eX]

[DOI]

Proceedings of the International Symposium on Systems Engineering, 2019

A Precision Reliability Measurement in a S-Band Transponder for Space Applications.

[BibT_eX]

[DOI]

Enrico Petritoli

Fabio Leccese

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

Improving context awareness reliability estimation for a wind turbine using an RBD model.

[BibT_eX]

[DOI]

Diego Galar

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

Diagnostics for Temperature Sensors in Safety Instrumented Systems.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

2018

Reliability Allocation Procedures in Complex Redundant Systems.

[BibT_eX]

[DOI]

IEEE Syst. J., 2018

Reliability and Maintenance Analysis of Unmanned Aerial Vehicles.

[BibT_eX]

[DOI]

Enrico Petritoli

Fabio Leccese

Sensors, 2018

Failure modes, mechanisms and effect analysis on temperature redundant sensor stage.

[BibT_eX]

[DOI]

Reliab. Eng. Syst. Saf., 2018

Failure Modes and Mechanisms of Sensors Used in Oil&Gas Applications.

[BibT_eX]

[DOI]

Proceedings of the Sensors, 2018

A proposal of uncertainty assessment for data of environmental testing: Using a machine learning procedure.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

Wind induced vibrations: A proposal of test profile for outdoor luminaires.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

Reliability analysis and electrical characterization of a Class-E resonant inverter.

[BibT_eX]

[DOI]

Maria Cristina Piccirilli

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

2017

Self-cleaning of Si photovoltaic modules by a nanostructured TiO2 spray-coating.

[BibT_eX]

[DOI]

Ennio Antonio Carnevale

Mara Bruzzi

Lorenzo Signorini

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

Fault detection in Class-E<sup>2</sup> resonant converters.

[BibT_eX]

[DOI]

Agasthya Ayachit

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

Characterization of a Si/InGaAs lateral beam splitting photovoltaic system.

[BibT_eX]

[DOI]

S. Calastrini

Andrea Baldi

Ennio Antonio Carnevale

Mara Bruzzi

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

2016

Practical Issues and Characterization of a Photovoltaic/Thermal Linear Focus 20× Solar Concentrator.

[BibT_eX]

[DOI]

Alessandro Cappelletti

IEEE Trans. Instrum. Meas., 2016

Component Reliability Importance assessment on complex systems using Credible Improvement Potential.

[BibT_eX]

[DOI]

Maria Cristina Piccirilli

Microelectron. Reliab., 2016

Fault detection of resonant inverters for wireless power transmission using MLMVNN.

[BibT_eX]

[DOI]

Proceedings of the 2nd IEEE International Forum on Research and Technologies for Society and Industry Leveraging a better tomorrow, 2016

Reliability allocation assessment using MEOWA method in complex redundant systems.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Symposium on Systems Engineering, 2016

Measurements and characterization of air temperature sensors for weather stations.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2016

A condition monitoring tool based on a FMECA and FMMEA combined approach in Oil&Gas applications.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2016

2015

Ultracapacitor Degradation State Diagnosis via Electrochemical Impedance Spectroscopy.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2015

Evaluation of the Aging Process of Dye-Sensitized Solar Cells Under Different Stress Conditions.

[BibT_eX]

[DOI]

Ennio Antonio Carnevale

Lorenzo Donati

Mara Bruzzi

IEEE Trans. Instrum. Meas., 2015

Reliability assessment for complex systems: A new approach based on RBD models.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Symposium on Systems Engineering, 2015

Linear solar PV/T concentrator monitoring system and derivation of performance index.

[BibT_eX]

[DOI]

Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

TTH library: A new tool for diagnostic assessment of Oil&Gas applications.

[BibT_eX]

[DOI]

Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

Mixed mode vibration test for luminaires devices: A new proposal.

[BibT_eX]

[DOI]

Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

Toward a new definition of FMECA approach.

[BibT_eX]

[DOI]

Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

2014

Risk assessment in the use of medical devices: A proposal to evaluate the impact of the human factor.

[BibT_eX]

[DOI]

Chiara Risaliti

Proceedings of the 2014 IEEE International Symposium on Medical Measurements and Applications, 2014

Characterization of optical ageing effects on Ruthenium based Dye-Sensitized Solar Cells.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

Improved RBD analysis for reliability assessment in industrial application.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

Frequency dependent failure region definition for supercapacitors.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

2013

Analysis of ultracapacitors ageing in automotive application.

[BibT_eX]

[DOI]

Microelectron. Reliab., 2013

Classification and analysis of failures of ultracapacitors in rail launchers applications.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Design and implementation of a on-board device for photovoltaic panels monitoring.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Reliability and availability analysis of an automatic highway toll collection system.

[BibT_eX]

[DOI]

Emiliano S. Paolilli

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Safety analysis in oil & gas industry in compliance with standards IEC61508 and IEC61511: Methods and applications.

[BibT_eX]

[DOI]

Valentina Luongo

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

2012

A new design technique of TFT-LCD display for avionics application.

[BibT_eX]

[DOI]

Giovanni Barile

Microelectron. Reliab., 2012

Experimental tests and reliability assessment of electronic ballast system.

[BibT_eX]

[DOI]

Microelectron. Reliab., 2012

2011

A simplified procedure for the analysis of Safety Instrumented Systems in the process industry application.

[BibT_eX]

[DOI]

Valentina Luongo

Microelectron. Reliab., 2011

Software automated testing: A solution to maximize the test plan coverage and to increase software reliability and quality in use.

[BibT_eX]

[DOI]

Valeria L. Scarano

Alessandro Bacioccola

Comput. Stand. Interfaces, 2011

2010

The FMEDA approach to improve the safety assessment according to the IEC61508.

[BibT_eX]

[DOI]