Konrad Wegener

According to our database, Konrad Wegener authored at least 26 papers between 1981 and 2024.

Collaborative distances:

• Dijkstra number of five.
• Erdős number of five.

2024

Automatic Characterization of WEDM Single Craters Through AI Based Object Detection.

Eduardo Gonzalez-Sanchez, Davide Saccardo, Paulo Borges Esteves, Michal Kuffa, Konrad Wegener

Int. J. Autom. Technol., March, 2024

2023

Acoustic Roughness Measurement of Railway Tracks: Running Surface Detection and Compensation of Lateral Movements for Optical Measurements on a Train.

Florian Mauz, Remo Wigger, Loris Griesbaum, Tobias Wahl, Michal Kuffa, Konrad Wegener

Sensors, 2023

2022

New Control Parametrization Strategy for Flexible Feed Drives.

Natanael Lanz, Sascha Weikert, Konrad Wegener

Int. J. Autom. Technol., 2022

2021

Fleet learning of thermal error compensation in machine tools.

Fabian Stoop, Josef Mayr, Clemens Sulz, Friedrich Bleicher, Konrad Wegener

Proceedings of the 26th IEEE International Conference on Emerging Technologies and Factory Automation, 2021

2020

Optimizing human-robot task allocation using a simulation tool based on standardized work descriptions.

Timo Bänziger, Andreas M. Kunz, Konrad Wegener

J. Intell. Manuf., 2020

Editorial: Advanced Material Driven Design of Machine Tools.

Konrad Wegener, Atsushi Matsubara

Int. J. Autom. Technol., 2020

Utilization of CFRP in High-Speed Stamping Presses and its Gigacycle Fatigue Testing at Resonance Frequency.

Eduard Relea, Varun Urundolil Kumaran, Alberto Sanchez Cebrian, Christian Gschnitzer-Bärnthaler, Markus Zogg, Lukás Weiss, Konrad Wegener

Int. J. Autom. Technol., 2020

Self-Optimizing Grinding Machines using Gaussian Process Models and Constrained Bayesian Optimization.

Markus Maier, Alisa Rupenyan, Christian Bobst, Konrad Wegener

CoRR, 2020

Model order reduction of thermo-mechanical models with parametric convective boundary conditions: focus on machine tool.

Pablo Hernández-Becerro, Daniel Spescha, Konrad Wegener

CoRR, 2020

2019

MPCC-Based Set Point Optimisation for Machine Tools.

Titus Haas, Sascha Weikert, Konrad Wegener

Int. J. Autom. Technol., 2019

2018

Efficient Static and Dynamic Modelling of Machine Structures with Large Linear Motions.

Natanael Lanz, Daniel Spescha, Sascha Weikert, Konrad Wegener

Int. J. Autom. Technol., 2018

Meshless Methods for Large Deformation Elastodynamics.

Matthias Röthlin, Hagen Klippel, Konrad Wegener

CoRR, 2018

2017

Synchronisation of Feed Axes with Differing Bandwidths Using Set Point Delay.

Daniel Spescha, Sascha Weikert, Oliver Zirn, Konrad Wegener

Int. J. Autom. Technol., 2017

A Library of Skills and Behaviors for Smart Mobile Assistant Robots in Automotive Assembly Lines.

Timo Bänziger, Andreas M. Kunz, Konrad Wegener

Proceedings of the Companion of the 2017 ACM/IEEE International Conference on Human-Robot Interaction, 2017

2016

Age of Compensation - Challenge and Chance for Machine Tool Industry.

Konrad Wegener, Sascha Weikert, Josef Mayr

Int. J. Autom. Technol., 2016

Geometry Optimisation for 2D Cutting: A Quadratic Programming Approach.

Florian Sellmann, Titus Haas, Hop Nguyen, Sascha Weikert, Konrad Wegener

Int. J. Autom. Technol., 2016

Orientation Smoothing for 5-Axis Machining Using Quasi-Redundant Degrees of Freedom.

Florian Sellmann, Titus Haas, Hop Nguyen, Sascha Weikert, Konrad Wegener

Int. J. Autom. Technol., 2016

Machine Tool Energy Efficiency - A Component Mapping-Based Approach.

Timo Schudeleit, Simon Züst, Lukás Weiss, Konrad Wegener

Int. J. Autom. Technol., 2016

Increased Productivity for Redundant Laser Scanners Using an Optimal Trajectory Separation Method.

Titus Haas, Maximilian Warhanek, Michael Dietlicher, Konrad Wegener

Int. J. Autom. Technol., 2016

Identifying the potential of human-robot collaboration in automotive assembly lines using a standardised work description.

Johannes Teiwes, Timo Bänziger, Andreas M. Kunz, Konrad Wegener

Proceedings of the 22nd International Conference on Automation and Computing, 2016

2015

Towards Decentralized Production: A Novel Method to Identify Flexibility Potentials in Production Sequences Based on Flexibility Graphs.

Lennart Bochmann, Lars Gehrke, Adrian Böckenkamp, Frank Weichert, Rainer Albersmann, Christian Prasse, Christoph Mertens, Marco Motta, Konrad Wegener

Int. J. Autom. Technol., 2015

2014

Evaluation of the IWF-Wunder Reproduction Method for Generating Positive Replica.

Marcel Henerichs, Michael Egeter, Thomas Liebrich, Robert Voß, Konrad Wegener

Int. J. Autom. Technol., 2014

Thermally Caused Location Errors of Rotary Axes of 5-Axis Machine Tools.

Michael Gebhardt, Alexander Schneeberger, Sascha Weikert, Wolfgang Knapp, Konrad Wegener

Int. J. Autom. Technol., 2014

2013

Building a vector model representation of a two-axis laser scanhead using numerical analysis for simulation purposes.

Gregory Eberle, Claus Dold, Konrad Wegener

Int. J. Model. Identif. Control., 2013

Influence of the Anode Material and the Flushing Gas on the Dry Electrical Discharge Machining Process.

Raoul Roth, Beck Lukas, Hartmi Balzer, Friedrich Kuster, Eduardo Weingärtner, Konrad Wegener

Int. J. Autom. Technol., 2013

1981

Moderne Stapelverarbeitung.

Konrad Wegener

Angew. Inform., 1981