Koichi Morishige

According to our database, Koichi Morishige authored at least 14 papers between 1997 and 2024.

Collaborative distances:

• Dijkstra number of five.
• Erdős number of four.

2024

C-Space-Based Toolpath Generation for Five-Axis Controlled Machining with Special Tools.

Ken Okamoto, Koichi Morishige

Int. J. Autom. Technol., September, 2024

2022

Generation of a Robot Program and Determination of an Optimal Workpiece Placement Considering the Manipulability of Industrial Robots.

Kei Moriguchi, Takuya Mizokami, Koichi Morishige

Int. J. Autom. Technol., 2022

2021

Tool Path Generation for Five-Axis Controlled Machining of Free-Form Surfaces Using a Barrel Tool Considering Continuity of Tool Postures.

Tomonobu Suzuki, Ken Okamoto, Koichi Morishige

Int. J. Autom. Technol., 2021

2020

Tool Path Generation for 5-Axis Rough Cutting Using Haptic Device.

Koichi Morishige, Satoshi Mori

Int. J. Autom. Technol., 2020

2014

Development of Turning Machine Operation Interface that Uses Haptic Device.

Raiyo Oka, Koichi Morishige

Int. J. Autom. Technol., 2014

2012

Editorial: Rapid Prototyping.

Koichi Morishige, Masahiro Anzai, Hiroyuki Narahara

Int. J. Autom. Technol., 2012

Tool Path Generation for Five-Axis Controlled Machining with Consideration of Structural Interference.

Tomoyuki Kanda, Koichi Morishige

Int. J. Autom. Technol., 2012

2011

Tool Path Generation for Five-Axis Controlled Machining with Consideration of Motion of Two Rotational Axes.

Koichi Morishige, Makoto Kaneko

Int. J. Autom. Technol., 2011

2009

Polishing Process Automation by Industrial Robots with Polished Surface Quality Judged Based on Imaging Processing.

Tomoya Ito, Koichi Morishige

Int. J. Autom. Technol., 2009

2008

Editorial: Rapid Prototying.

Hiroyuki Narahara, Koichi Morishige

Int. J. Autom. Technol., 2008

Editorial: Dies and Molds.

Koichi Morishige

Int. J. Autom. Technol., 2008

2007

Development of Tool Fabrication CAD/CAM for Conicoid End Mill.

Koichi Morishige, Shingo Ishizuka, Yoshimi Takeuchi

Int. J. Autom. Technol., 2007

1998

Five-Axis Control Sculptured Surface Machining Using Conicoid End Mill.

Koichi Morishige, Teruhisa Nasu, Yoshimi Takeuchi

Proceedings of the Machining Impossible Shapes, 1998

1997

5-axis control rough cutting of an impeller with efficiency and accuracy.

Koichi Morishige, Yoshimi Takeuchi

Proceedings of the 1997 IEEE International Conference on Robotics and Automation, 1997