K. T. Chau

Orcid: 0000-0003-1620-9688

Affiliations:
  • University of Hong Kong, Department of Electrical and Electronic Engineering, Hong Kong


According to our database1, K. T. Chau authored at least 70 papers between 1992 and 2024.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Awards

IEEE Fellow

IEEE Fellow 2013, "For contributions to energy systems for electric and hybrid vehicles".

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2024
Pulse Density Modulated Three-Phase Single-Stage AC-AC System for Series Resonant Load With Low Grid Current Harmonics.
IEEE Trans. Ind. Electron., May, 2024

Impedance Buffer-Based Reactance Cancellation Method for CLC-S Compensated Wireless Power Transfer.
IEEE Trans. Ind. Electron., 2024

A Multistage Constant-Current Wireless Charging Method Using Pulse Frequency Modulation for Multistorey EV Carparks.
Proceedings of the IEEE VTS Asia Pacific Wireless Communications Symposium, 2024

2023
Autonomous Pulse Frequency Modulation for Wireless Battery Charging With Zero-Voltage Switching.
IEEE Trans. Ind. Electron., September, 2023

Modeling and Analysis of Wireless Power Transfer System Via Unified Full-Load Discrete-Time Model.
IEEE Trans. Ind. Electron., June, 2023

Design and Analysis of Wireless Resolver for Wireless Switched Reluctance Motors.
IEEE Trans. Ind. Electron., 2023

Stepless Frequency Regulation for Load-Independent Wireless Power Transfer with Time-Division Switched Capacitors.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023

Optimal Deployment of Traffic Energy Router for Wireless Energy Trading.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023

Finite-Time Speed Control of Three-Level Inverter for Superconducting Machines in Electric Aircraft.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023

2022
Design and Analysis of Demand-Customized Selective Wireless Power Transfer System.
IEEE Trans. Ind. Electron., 2022

Wireless Power and Drive Transfer for Piping Network.
IEEE Trans. Ind. Electron., 2022

Output-Controllable Efficiency-Optimized Wireless Power Transfer Using Hybrid Modulation.
IEEE Trans. Ind. Electron., 2022

Wireless Power and Drive Transfer Using Orthogonal Bipolar Couplers and Separately Excited Modulation.
IEEE Trans. Ind. Electron., 2022

An Integrated Wireless Motor System Using Laminated Magnetic Coupler and Commutative-Resonant Control.
IEEE Trans. Ind. Electron., 2022

Multisource-Multidestination Optimal Energy Routing in Static and Time-Varying Vehicular Energy Network.
IEEE Internet Things J., 2022

2021
Design, Analysis, and Implementation of Wireless Shaded-Pole Induction Motors.
IEEE Trans. Ind. Electron., 2021

Low-Frequency Medium Power Capacitor-Free Self-Resonant Wireless Power Transfer.
IEEE Trans. Ind. Electron., 2021

A Double-Rotor Flux-Switching Permanent-Magnet Motor for Electric Vehicles With Magnetic Differential.
IEEE Trans. Ind. Electron., 2021

A Critical Review of Advanced Electric Machines and Control Strategies for Electric Vehicles.
Proc. IEEE, 2021

Meter-Range Wireless Motor Drive for Pipeline Transportation.
CoRR, 2021

2020
A New Parallel-Hybrid-Excited Permanent-Magnet Machine With Harmonic-Differential Effect for Electric Vehicles.
IEEE Trans. Veh. Technol., 2020

A Wireless Dimmable Lighting System Using Variable-Power Variable-Frequency Control.
IEEE Trans. Ind. Electron., 2020

Design and Analysis of a New Parallel-Hybrid-Excited Machine With Harmonic-Shift Structure.
IEEE Trans. Ind. Electron., 2020

2019
An LCC-Compensated Multiple-Frequency Wireless Motor System.
IEEE Trans. Ind. Informatics, 2019

An Effective Sandwiched Wireless Power Transfer System for Charging Implantable Cardiac Pacemaker.
IEEE Trans. Ind. Electron., 2019

Design and Analysis of Wireless Ballastless Fluorescent Lighting.
IEEE Trans. Ind. Electron., 2019

Design and Analysis of Wireless Switched Reluctance Motor Drives.
IEEE Trans. Ind. Electron., 2019

Wireless Secondary-Converterless Bipolar Drive for AC Application.
Proceedings of the IECON 2019, 2019

2018
A Phase-Decoupled Flux-Reversal Linear Generator for Low-Speed Oscillatory Energy Conversion Using Impedance Matching Strategy.
IEEE Trans. Ind. Electron., 2018

Comparison of Induction Heating for Pans and Woks Using Planar Cooktops.
Proceedings of the 27th IEEE International Symposium on Industrial Electronics, 2018

2017
Pulse-Width-Modulation-Based Electromagnetic Interference Mitigation of Bidirectional Grid-Connected Converters for Electric Vehicles.
IEEE Trans. Smart Grid, 2017

Flexible Induction Heating Using Magnetic Resonant Coupling.
IEEE Trans. Ind. Electron., 2017

2016
Design and Analysis of an Electronic-Geared Magnetless Machine for Electric Vehicles.
IEEE Trans. Ind. Electron., 2016

Dynamic Performance Evaluation of a Nine-Phase Flux-Switching Permanent-Magnet Motor Drive With Model Predictive Control.
IEEE Trans. Ind. Electron., 2016

2015
Sensorless SVPWM-FADTC of a New Flux-Modulated Permanent-Magnet Wheel Motor Based on a Wide-Speed Sliding Mode Observer.
IEEE Trans. Ind. Electron., 2015

Electromagnetic design of a new hybrid-excited flux-switching machine for fault-tolerant operations.
Proceedings of the IECON 2015, 2015

Complex-conjugate control of a linear magnetic-geared permanent-magnet machine for Archimedes wave swing based power generation.
Proceedings of the IECON 2015, 2015

A new fault-tolerant flux-reversal doubly-salient magnetless motor drive with four-phase topology.
Proceedings of the IECON 2015, 2015

Quantitative comparison of permanent magnet linear machines for ropeless elevator.
Proceedings of the IECON 2015, 2015

2014
Integrated Energy Management of Plug-in Electric Vehicles in Power Grid With Renewables.
IEEE Trans. Veh. Technol., 2014

2013
Analysis and Stabilization of Chaos in the Electric-Vehicle Steering System.
IEEE Trans. Veh. Technol., 2013

Remedial Injected-Harmonic-Current Operation of Redundant Flux-Switching Permanent-Magnet Motor Drives.
IEEE Trans. Ind. Electron., 2013

Opportunities and Challenges of Vehicle-to-Home, Vehicle-to-Vehicle, and Vehicle-to-Grid Technologies.
Proc. IEEE, 2013

Design and analysis of a DC field multitooth switched reluctance machine by using soft-magnetic-composite material.
Proceedings of the 22nd IEEE International Symposium on Industrial Electronics, 2013

2012
Optimal design and implementation of a permanent magnet linear vernier machine for direct-drive wave energy extraction.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

2010
Remedial Brushless AC Operation of Fault-Tolerant Doubly Salient Permanent-Magnet Motor Drives.
IEEE Trans. Ind. Electron., 2010

An Efficient Wind-Photovoltaic Hybrid Generation System Using Doubly Excited Permanent-Magnet Brushless Machine.
IEEE Trans. Ind. Electron., 2010

A Permanent-Magnet Hybrid Brushless Integrated Starter-Generator for Hybrid Electric Vehicles.
IEEE Trans. Ind. Electron., 2010

2009
Design, Analysis, and Experimentation of Chaotic Permanent Magnet DC Motor Drives for Electric Compaction.
IEEE Trans. Circuits Syst. II Express Briefs, 2009

2008
A New Compliance Control Approach for Traveling-Wave Ultrasonic Motors.
IEEE Trans. Ind. Electron., 2008

Overview of Permanent-Magnet Brushless Drives for Electric and Hybrid Electric Vehicles.
IEEE Trans. Ind. Electron., 2008

2007
Chaoization of DC Motors for Industrial Mixing.
IEEE Trans. Ind. Electron., 2007

A New Switched-Capacitor Boost-Multilevel Inverter Using Partial Charging.
IEEE Trans. Circuits Syst. II Express Briefs, 2007

Emerging Energy-Efficient Technologies for Hybrid Electric Vehicles.
Proc. IEEE, 2007

Design and Analysis of a Chaotic PWM Inverter for Electric Vehicles.
Proceedings of the Conference Record of the 2007 IEEE Industry Applications Conference Forty-Second IAS Annual Meeting, 2007

Design and Control of a Double-Stator Permanent-Magnet Motor Drive for Electric Vehicles.
Proceedings of the Conference Record of the 2007 IEEE Industry Applications Conference Forty-Second IAS Annual Meeting, 2007

Design and Control of a Doubly-Excited Permanent-Magnet Brushless Integrated-Starter-Generator for Hybrid Electric Vehicles.
Proceedings of the Conference Record of the 2007 IEEE Industry Applications Conference Forty-Second IAS Annual Meeting, 2007

A Magnetic-Geared Outer-Rotor Permanent-Magnet Brushless Machine for Wind Power Generation.
Proceedings of the Conference Record of the 2007 IEEE Industry Applications Conference Forty-Second IAS Annual Meeting, 2007

2005
Neural network-based residual capacity indicator for nickel-metal hydride batteries in electric vehicles.
IEEE Trans. Veh. Technol., 2005

2004
Landslide hazard analysis for Hong Kong using landslide inventory and GIS.
Comput. Geosci., 2004

2003
Spectral analysis of a new six-phase pole-changing induction motor drive for electric vehicles.
IEEE Trans. Ind. Electron., 2003

2002
Adaptive neuro-fuzzy modeling of battery residual capacity for electric vehicles.
IEEE Trans. Ind. Electron., 2002

2000
Acoustic noise radiated by PWM-controllel induction machine drives.
IEEE Trans. Ind. Electron., 2000

Analysis of chaos in current-mode-controlled DC drive systems.
IEEE Trans. Ind. Electron., 2000

1999
A novel sliding-mode observer for indirect position sensing of switched reluctance motor drives.
IEEE Trans. Ind. Electron., 1999

1997
An overview of power electronics in electric vehicles.
IEEE Trans. Ind. Electron., 1997

1996
Novel permanent magnet motor drives for electric vehicles.
IEEE Trans. Ind. Electron., 1996

1994
Spectral modeling of switched-mode power converters.
IEEE Trans. Ind. Electron., 1994

1993
Computer simulation and analysis of a new polyphase multipole motor drive.
IEEE Trans. Ind. Electron., 1993

1992
A fast and exact time-domain simulation of switched-mode power regulators.
IEEE Trans. Ind. Electron., 1992


  Loading...