Jordi-Roger Riba

Orcid: 0000-0001-8774-2389

According to our database1, Jordi-Roger Riba authored at least 50 papers between 2000 and 2024.

Collaborative distances:
  • Dijkstra number2 of four.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2024
Predicting the Effect of Voltage Harmonic Phase Angle on Transformer Core Losses.
IEEE Trans. Instrum. Meas., 2024

Accelerated Aging Quantification of XL-ETFE Wires in Low Pressure Aircraft Environments.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

2023
Radial Thermoelectric Model for Stranded Transmission Line Conductors.
Sensors, November, 2023

Energy Balance of Wireless Sensor Nodes Based on Bluetooth Low Energy and Thermoelectric Energy Harvesting.
Sensors, February, 2023

Denoising of Online Resistance Measurements of Power Connectors for IoT Applications.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023

2022
Arc Fault Protections for Aeronautic Applications: A Review Identifying the Effects, Detection Methods, Current Progress, Limitations, Future Challenges, and Research Needs.
IEEE Trans. Instrum. Meas., 2022

Performance Evaluation of Solar-Blind Gas-Filled Sensors to Detect Electrical Discharges for Low-Pressure Aircraft Applications.
Sensors, 2022

Use of DSLR and Sonic Cameras to Detect and Locate High-Voltage Corona Discharges.
Sensors, 2022

Application of Image Sensors to Detect and Locate Electrical Discharges: A Review.
Sensors, 2022

Measurement of Corona Discharges under Variable Geometry, Frequency and Pressure Environment.
Sensors, 2022

2021
Black-Box Modeling of DC-DC Converters Based on Wavelet Convolutional Neural Networks.
IEEE Trans. Instrum. Meas., 2021

PMSM Parameter Estimation for Sensorless FOC Based on Differential Power Factor.
IEEE Trans. Instrum. Meas., 2021

CNN-LSTM-Based Prognostics of Bidirectional Converters for Electric Vehicles' Machine.
Sensors, 2021

On-Line Remaining Useful Life Estimation of Power Connectors Focused on Predictive Maintenance.
Sensors, 2021

Analysis of a Smart Sensor Based Solution for Smart Grids Real-Time Dynamic Thermal Line Rating.
Sensors, 2021

Corona Discharge Characteristics under Variable Frequency and Pressure Environments.
Sensors, 2021

2020
PMSM Design for Achieving a Target Torque-Speed-Efficiency Map.
IEEE Trans. Veh. Technol., 2020

Arc Tracking Control in Insulation Systems for Aeronautic Applications: Challenges, Opportunities, and Research Needs.
Sensors, 2020

Insulation Failure Quantification Based on the Energy of Digital Images Using Low-Cost Imaging Sensors.
Sensors, 2020

Experimental Study of Visual Corona under Aeronautic Pressure Conditions Using Low-Cost Imaging Sensors.
Sensors, 2020

Non-Intrusive Parameter Identification of a Three-Phase Rectifier Based on an Optimization Approach.
Proceedings of the 46th Annual Conference of the IEEE Industrial Electronics Society, 2020

Fast and Efficient PMSM Electromagnetic Parameter Identification Methodology from the Efficiency Map.
Proceedings of the 46th Annual Conference of the IEEE Industrial Electronics Society, 2020

Black-Box Modelling of a DC-DC Buck Converter Based on a Recurrent Neural Network.
Proceedings of the 2020 IEEE International Conference on Industrial Technology, 2020

Experimental Study of the Effect of Aeolian Vibrations on the Contact Resistance of Substation Connectors.
Proceedings of the 2020 IEEE International Conference on Industrial Technology, 2020

2019
Low-Cost Online Contact Resistance Measurement of Power Connectors to Ease Predictive Maintenance.
IEEE Trans. Instrum. Meas., 2019

Identification of natural rubber samples for high-voltage insulation applications.
Comput. Chem. Eng., 2019

Water-Pumping Permanent Magnet Synchronous Motor Optimization Based on Customized Torque-Speed Operating Area and Performance Characteristics.
Proceedings of the IECON 2019, 2019

2018
Design and Optimization for Vehicle Driving Cycle of Rare-Earth-Free SynRM Based on Coupled Lumped Thermal and Magnetic Networks.
IEEE Trans. Veh. Technol., 2018

Development of a Behavior Maps Tool to Evaluate Drive Operational Boundaries and Optimization Assessment of PMa-SynRMs.
IEEE Trans. Veh. Technol., 2018

Feasibility Analysis of Bluetooth 5 for Real-Time Data Transmission in High-Voltage AC and DC Substations.
Proceedings of the IECON 2018, 2018

Feasibility Study on Thermal Energy Harvesting for Low Powered Electronics in High-Voltage Substations.
Proceedings of the IECON 2018, 2018

2017
A Genetic-Algorithm-Optimized Fractal Model to Predict the Constriction Resistance From Surface Roughness Measurements.
IEEE Trans. Instrum. Meas., 2017

2015
Temperature rise estimation of substation connectors using data-driven models: Case: Thermal conveccion response.
Proceedings of the IECON 2015, 2015

Optimization of short-circuit tests based on finite element analysis.
Proceedings of the IEEE International Conference on Industrial Technology, 2015

2014
Improved design of an extra-high-voltage expansion substation connector through magnetic field analysis.
Simul. Model. Pract. Theory, 2014

Redesign process of a 765 kV<sub>RMS</sub> AC substation connector by means of 3D-FEM simulations.
Simul. Model. Pract. Theory, 2014

2013
Shaft Trajectory Analysis in a Partially Demagnetized Permanent-Magnet Synchronous Motor.
IEEE Trans. Ind. Electron., 2013

An introduction to fault diagnosis of permanent magnet synchronous machines in master's degree courses.
Comput. Appl. Eng. Educ., 2013

Magnet shape influence on the performance of AFPMM with demagnetization.
Proceedings of the IECON 2013, 2013

2012
Comparative Study of Multivariate Methods to Identify Paper Finishes Using Infrared Spectroscopy.
IEEE Trans. Instrum. Meas., 2012

2011
Modeling of Surface-Mounted Permanent Magnet Synchronous Motors With Stator Winding Interturn Faults.
IEEE Trans. Ind. Electron., 2011

Feature Extraction of Demagnetization Faults in Permanent-Magnet Synchronous Motors Based on Box-Counting Fractal Dimension.
IEEE Trans. Ind. Electron., 2011

Dynamic model for AC and DC contactors - Simulation and experimental validation.
Simul. Model. Pract. Theory, 2011

Signal Injection as a Fault Detection Technique.
Sensors, 2011

Validation of the parametric model of a DC contactor using Matlab-Simulink.
Comput. Appl. Eng. Educ., 2011

Electric field effects of bundle and stranded conductors in overhead power lines.
Comput. Appl. Eng. Educ., 2011

Magnetic field generated by sagging conductors of overhead power lines.
Comput. Appl. Eng. Educ., 2011

2010
A Computer Model for Teaching the Dynamic Behavior of AC Contactors.
IEEE Trans. Educ., 2010

2008
Sensorless Control and Fault Diagnosis of Electromechanical Contactors.
IEEE Trans. Ind. Electron., 2008

2000
Methods for Invariant Signature Classification.
Proceedings of the 15th International Conference on Pattern Recognition, 2000


  Loading...