Jingshan Li

Hyo Kyung Lee

Raymond U. Osarogiagbon

J. Medical Syst., 2018

Research on an Improved Algorithm for Eliminating Gross Error in UAV Image Mosaic.

[BibT_eX]

[DOI]

Proceedings of the 26th International Conference on Geoinformatics, 2018

Discriminative Weighted Low-Rank Collaborative Representation Classifier for Robust Face Recognition.

[BibT_eX]

[DOI]

Proceedings of the Biometric Recognition - 13th Chinese Conference, 2018

2017

Electronic Visits in Primary Care: Modeling, Analysis, and Scheduling Policies.

[BibT_eX]

[DOI]

IEEE Trans Autom. Sci. Eng., 2017

Optimal Planning of Plant Flexibility: Problem Formulation and Performance Analysis.

[BibT_eX]

[DOI]

IEEE Trans Autom. Sci. Eng., 2017

Selective Assembly System With Unreliable Bernoulli Machines and Finite Buffers.

[BibT_eX]

[DOI]

Weiwen Deng

IEEE Trans Autom. Sci. Eng., 2017

Transient Analysis of Serial Production Lines With Perishable Products: Bernoulli Reliability Model.

[BibT_eX]

[DOI]

John A. Horst

IEEE Trans. Autom. Control., 2017

Flexible Serial Lines With Setups: Analysis, Improvement, and Application.

[BibT_eX]

[DOI]

IEEE Robotics Autom. Lett., 2017

A Sub-Optimal Control Policy in a Two-Product Door Manufacturing Line With Geometric Reliability Machines.

[BibT_eX]

[DOI]

IEEE Robotics Autom. Lett., 2017

From production systems to health care delivery systems: a retrospective look on similarities, difficulties and opportunities.

[BibT_eX]

[DOI]

Xiang Zhong

Hyo Kyung Lee

Int. J. Prod. Res., 2017

Reducing energy consumption in serial production lines with Bernoulli reliability machines.

[BibT_eX]

[DOI]

Int. J. Prod. Res., 2017

Laplacian Regularized Non-negative Sparse Low-Rank Representation Classification.

[BibT_eX]

[DOI]

Proceedings of the Biometric Recognition - 12th Chinese Conference, 2017

Incentive-based optimal intervention policy to reduce hospital readmissions for COPD patients.

[BibT_eX]

[DOI]

Proceedings of the 13th IEEE Conference on Automation Science and Engineering, 2017

Iteration algorithms for performance evaluation and buffer design of Bernoulli serial lines with waiting time constraints.

[BibT_eX]

[DOI]

Jun-Ho Lee

John A. Horst

Proceedings of the 13th IEEE Conference on Automation Science and Engineering, 2017

Modeling and analysis of postoperative intervention process for total joint replacement patients using simulations.

[BibT_eX]

[DOI]

Proceedings of the 13th IEEE Conference on Automation Science and Engineering, 2017

2016

A System-Theoretic Approach to Modeling and Analysis of Mammography Testing Process.

[BibT_eX]

[DOI]

IEEE Trans. Syst. Man Cybern. Syst., 2016

Efficient Algorithms for Analysis and Improvement of Flexible Manufacturing Systems.

[BibT_eX]

[DOI]

IEEE Trans Autom. Sci. Eng., 2016

Modeling and Analysis of Ward Patient Rescue Process on the Hospital Floor.

[BibT_eX]

[DOI]

IEEE Trans Autom. Sci. Eng., 2016

Performance Evaluation of Modularized Global Equalization System for Lithium-Ion Battery Packs.

[BibT_eX]

[DOI]

Weiwen Deng

IEEE Trans Autom. Sci. Eng., 2016

An iterative method for analysis of joint visit model at Dean East Clinic.

[BibT_eX]

[DOI]

Proceedings of the 2016 IEEE International Conference on Systems, Man, and Cybernetics, 2016

Face recognition via non-negative sparse low-rank representation classification.

[BibT_eX]

[DOI]

Proceedings of the 12th International Conference on Natural Computation, 2016

An energy and productivity optimization model in Bernoulli serial lines.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Conference on Automation Science and Engineering, 2016

A Markov chain model to evaluate patient transitions in small community hospitals.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Conference on Automation Science and Engineering, 2016

Analysis of closed loop production lines in automotive body shops.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Conference on Automation Science and Engineering, 2016

2015

Analysis and Improvement of Multiproduct Bernoulli Serial Lines: Theory and Application.

[BibT_eX]

[DOI]

IEEE Trans. Syst. Man Cybern. Syst., 2015

Bottleneck Analysis to Reduce Surgical Flow Disruptions: Theory and Application.

[BibT_eX]

[DOI]

IEEE Trans Autom. Sci. Eng., 2015

Guest Editorial Special Section on the 2013 International Conference on Automation Science and Engineering.

[BibT_eX]

[DOI]

IEEE Trans Autom. Sci. Eng., 2015

Modeling and analysis of e-visits in primary care.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Conference on Automation Science and Engineering, 2015

Plant flexibility planning: Problem formulation and performance estimation.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Conference on Automation Science and Engineering, 2015

Analysis of multi-patient rapid response processes: An iterative approach.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Conference on Automation Science and Engineering, 2015

Analysis of key operation performance data in manufacturing systems.

[BibT_eX]

[DOI]

Proceedings of the 2015 IEEE International Conference on Big Data (IEEE BigData 2015), Santa Clara, CA, USA, October 29, 2015

2014

Analysis of Multiproduct Manufacturing Systems With Homogeneous Exponential Machines.

[BibT_eX]

[DOI]

IEEE Trans Autom. Sci. Eng., 2014

Improving Response-Time Performance in Acute Care Delivery: A Systems Approach.

[BibT_eX]

[DOI]

IEEE Trans Autom. Sci. Eng., 2014

Modeling and Analysis of Care Delivery Services Within Patient Rooms: A System-Theoretic Approach.

[BibT_eX]

[DOI]

IEEE Trans Autom. Sci. Eng., 2014

A Quality Flow Model in Battery Manufacturing Systems for Electric Vehicles.

[BibT_eX]

[DOI]

IEEE Trans Autom. Sci. Eng., 2014

Modularized global equalization of battery cells for electric vehicles.

[BibT_eX]

[DOI]

Weiwen Deng

Proceedings of the 2014 IEEE International Conference on Robotics and Automation, 2014

Primary care redesign: A simulation study at a pediatric clinic.

[BibT_eX]

[DOI]

Proceedings of the 2014 IEEE International Conference on Automation Science and Engineering, 2014

Performance evaluation of multi-product manufacturing systems with asynchronous exponential machines.

[BibT_eX]

[DOI]

Proceedings of the 2014 IEEE International Conference on Automation Science and Engineering, 2014

An analytical model for performance evaluation of operating room schedules in orthopedic surgery.

[BibT_eX]

[DOI]

Susan G. Sanford-Ring

Proceedings of the 2014 IEEE International Conference on Automation Science and Engineering, 2014

Review of structures and control of battery-supercapacitor hybrid energy storage system for electric vehicles.

[BibT_eX]

[DOI]

Proceedings of the 2014 IEEE International Conference on Automation Science and Engineering, 2014

2013

Resilient Control for Serial Manufacturing Networks With Advance Notice of Disruptions.

[BibT_eX]

[DOI]

Lawrence E. Holloway

IEEE Trans. Syst. Man Cybern. Syst., 2013

Editorial: Automation in green manufacturing.

[BibT_eX]

[DOI]

IEEE Trans Autom. Sci. Eng., 2013

Virtual Battery: A Battery Simulation Framework for Electric Vehicles.

[BibT_eX]

[DOI]

IEEE Trans Autom. Sci. Eng., 2013

A Bernoulli Model of Multi-Product Manufacturing Systems.

[BibT_eX]

[DOI]

Proceedings of the 7th IFAC Conference on Manufacturing Modelling, Management, and Control, 2013

Modeling Quality Propagation in Automotive Paint Shops: An Application Study.

[BibT_eX]

[DOI]

Proceedings of the 7th IFAC Conference on Manufacturing Modelling, Management, and Control, 2013

Modeling and analysis of mammography testing process at a breast imaging center of University of Wisconsin medical foundation.

[BibT_eX]

[DOI]

Proceedings of the 2013 IEEE International Conference on Automation Science and Engineering, 2013

Dynamic production control of door manufacturing line at an automotive assembly plant.

[BibT_eX]

[DOI]

Yongzhen Lu

Proceedings of the 2013 IEEE International Conference on Automation Science and Engineering, 2013

Analysis of multi-product manufacturing systems with homogeneous exponential machines.

[BibT_eX]

[DOI]

Proceedings of the 2013 IEEE International Conference on Automation Science and Engineering, 2013

Modeling and analysis of hospital inpatient rescue process: A Markov chain approach.

[BibT_eX]

[DOI]

Proceedings of the 2013 IEEE International Conference on Automation Science and Engineering, 2013

A Markov chain approach to study flow disruptions on surgery in emergency care.

[BibT_eX]

[DOI]

Xiufeng Shao

Douglas A. Wiegmann

Proceedings of the 2013 IEEE International Conference on Automation Science and Engineering, 2013

Integrated model of productivity and quality in serial production lines with repairs: Performance evaluation and bottleneck identification.

[BibT_eX]

[DOI]

Proceedings of the 2013 IEEE International Conference on Automation Science and Engineering, 2013

2012

Reducing Length of Stay in Emergency Department: A Simulation Study at a Community Hospital.

[BibT_eX]

[DOI]

IEEE Trans. Syst. Man Cybern. Part A, 2012

Modeling and Analysis of Rapid Response Process to Improve Patient Safety in Acute Care.

[BibT_eX]

[DOI]

IEEE Trans Autom. Sci. Eng., 2012

A Simulation Study to Improve Performance in the Preparation and Delivery of Antineoplastic Medications at a Community Hospital.

[BibT_eX]

[DOI]

J. Medical Syst., 2012

The robustness of scheduling policies in multi-product manufacturing systems with sequence-dependent setup times and finite buffers.

[BibT_eX]

[DOI]

Wei Feng

Li Zheng

Comput. Ind. Eng., 2012

Improving rapid response operations in acute care delivery - part II: Continuous improvement and case study.

[BibT_eX]

[DOI]

Proceedings of the 2012 IEEE International Conference on Automation Science and Engineering, 2012

Improving rapid response operations in acute care delivery - part I: System modeling and performance evaluation.

[BibT_eX]

[DOI]

Proceedings of the 2012 IEEE International Conference on Automation Science and Engineering, 2012

2011

Improving Financial Performance by Modeling and Analysis of Radiology Procedure Scheduling at a Large Community Hospital.

[BibT_eX]

[DOI]

Lingbo Lu

Paula Gisler

J. Medical Syst., 2011

Scheduling policies in multi-product manufacturing systems with sequence-dependent setup times.

[BibT_eX]

[DOI]

Wei Feng

Li Zheng

Proceedings of the Winter Simulation Conference 2011, 2011

Modeling and analysis of care delivery services within patient rooms.

[BibT_eX]

[DOI]

Junwen Wang

Patricia K. Howard

Proceedings of the IEEE Conference on Automation Science and Engineering, 2011

Virtual battery: A simulation framework for batteries in electric vehicles.

[BibT_eX]

[DOI]

Proceedings of the IEEE Conference on Automation Science and Engineering, 2011

Multi-product manufacturing systems with sequence-dependent setups: Performance evaluation and system properties.

[BibT_eX]

[DOI]

Wei Feng

Li Zheng

Proceedings of the IEEE Conference on Automation Science and Engineering, 2011

2010

Efficient Simulation Method for General Assembly Systems With Material Handling Based on Aggregated Event-Scheduling.

[BibT_eX]

[DOI]

IEEE Trans Autom. Sci. Eng., 2010

Formulation and a Simulation-Based Algorithm for Line-Side Buffer Assignment Problem in Systems of General Assembly Line With Material Handling.

[BibT_eX]

[DOI]

IEEE Trans Autom. Sci. Eng., 2010

Quality Analysis in Flexible Manufacturing Systems With Batch Productions: Performance Evaluation and Nonmonotonic Properties.

[BibT_eX]

[DOI]

IEEE Trans Autom. Sci. Eng., 2010

Product Sequencing With Respect to Quality in Flexible Manufacturing Systems With Batch Operations.

[BibT_eX]

[DOI]

IEEE Trans Autom. Sci. Eng., 2010

Approximate Analysis of Reentrant Lines With Bernoulli Reliability Model.

[BibT_eX]

[DOI]

Chong Wang

IEEE Trans Autom. Sci. Eng., 2010

Bottlenecks in Bernoulli Serial Lines With Rework.

[BibT_eX]

[DOI]

IEEE Trans Autom. Sci. Eng., 2010

Production systems engineering: Problems, solutions, and applications.

[BibT_eX]

[DOI]

Liang Zhang

Annu. Rev. Control., 2010

Quality bottleneck transitions in flexible manufacturing systems.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Conference on Robotics and Automation, 2010

Performance approximation and bottleneck identification in re-entrant lines.

[BibT_eX]

[DOI]

Yang Liu

Shu-Yin Chiang

Proceedings of the IEEE International Conference on Robotics and Automation, 2010

Improving quality in flexible manufacturing systems: A bottleneck transition approach.

[BibT_eX]

[DOI]

Proceedings of the IEEE Conference on Automation Science and Engineering, 2010

Modeling and analysis of hospital emergency department: An analytical framework and problem formulation.

[BibT_eX]

[DOI]

Claudia P. Arenas Guerrero

Patricia K. Howard

Proceedings of the IEEE Conference on Automation Science and Engineering, 2010

Hybrid/electric vehicle battery manufacturing: The state-of-the-art.

[BibT_eX]

[DOI]

Stephan Biller

Guoxian Xiao

Proceedings of the IEEE Conference on Automation Science and Engineering, 2010

Transient analysis of dairy filling and packing production lines.

[BibT_eX]

[DOI]

Junwen Wang

Proceedings of the American Control Conference, 2010

Achieving resilience for a class of serial production networks.

[BibT_eX]

[DOI]

Lawrence E. Holloway

Proceedings of the American Control Conference, 2010

2009

A Modeling and Aggregation Approach for Analyzing Resilience of Manufacturing Enterprises.

[BibT_eX]

[DOI]

Lawrence E. Holloway

Proceedings of the IEEE International Conference on Systems, 2009

A New Framework of Cluster-based Parallel Processing System for High-performance Geo-computing.

[BibT_eX]

[DOI]

Yan Ma

Dingsheng Liu

Proceedings of the IEEE International Geoscience & Remote Sensing Symposium, 2009

Design and Implementation of a Scalable General High Performance Remote Sensing Satellite Ground Processing System on Performance and Function.

[BibT_eX]

[DOI]

Dingsheng Liu

Proceedings of the Computational Science, 2009

Monotonic and non-monotonic properties of product quality in flexible manufacturing systems with batch operations.

[BibT_eX]

[DOI]

Proceedings of the IEEE Conference on Automation Science and Engineering, 2009

Performance analysis of split and merge production systems.

[BibT_eX]

[DOI]

Yang Liu

Proceedings of the American Control Conference, 2009

2008

Modeling and analysis of Bernoulli production systems with split and merge.

[BibT_eX]

[DOI]

Yang Liu

Proceedings of the 2008 IEEE International Conference on Robotics and Automation, 2008

Efficient simulation for serial production lines based on aggregated event-scheduling.

[BibT_eX]

[DOI]

Proceedings of the 2008 IEEE International Conference on Automation Science and Engineering, 2008

Quality analysis in flexible manufacturing systems with batch productions.

[BibT_eX]

[DOI]

Proceedings of the 2008 IEEE International Conference on Automation Science and Engineering, 2008

Towards modeling of resilience dynamics in manufacturing enterprises: Literature review and problem formulation.

[BibT_eX]

[DOI]

Larry E. Holloway

Proceedings of the 2008 IEEE International Conference on Automation Science and Engineering, 2008

2007

Manufacturing System Design to Improve Quality Buy Rate: An Automotive Paint Shop Application Study.

[BibT_eX]

[DOI]

Samuel P. Marin

IEEE Trans Autom. Sci. Eng., 2007

Quality Evaluation in Flexible Machining Systems: A Flexible Fixture Case Study.

[BibT_eX]

[DOI]

Proceedings of the 2007 IEEE International Conference on Robotics and Automation, 2007

Approximate Analysis of Re-Entrant Lines with Bernoulli Reliability Models.

[BibT_eX]

[DOI]

Chong Wang

Proceedings of the IEEE Conference on Automation Science and Engineering, 2007

2006

Quality Robustness Design of Manufacturing Systems with Repair and Rework.

[BibT_eX]

[DOI]

Samuel P. Marin

Proceedings of the 2006 IEEE International Conference on Robotics and Automation, 2006

2005

Overlapping decomposition: a system-theoretic method for modeling and analysis of complex manufacturing systems.

[BibT_eX]

[DOI]

IEEE Trans Autom. Sci. Eng., 2005

Lean buffering in serial production lines with non-exponential machines.

[BibT_eX]

[DOI]

Emre Enginarlar

OR Spectr., 2005

Approximating feeder line reliability statistics with partial data collection in assembly systems.

[BibT_eX]

[DOI]

Jeffrey M. Alden

John R. Rabaey

Comput. Ind. Eng., 2005

Analysis of Andon Type Transfer Production Lines: A Quantitative Approach.

[BibT_eX]

[DOI]

Proceedings of the 2005 IEEE International Conference on Robotics and Automation, 2005

Manufacturing system design to improve quality buy rate.

[BibT_eX]

[DOI]

Samuel P. Marin

Proceedings of the IEEE International Conference on Automation Science and Engineering, 2005

2004

Throughput analysis in automotive paint shops: a case study.

[BibT_eX]

[DOI]

IEEE Trans Autom. Sci. Eng., 2004

Modeling and analysis of manufacturing systems with parallel lines.

[BibT_eX]

[DOI]

IEEE Trans. Autom. Control., 2004

Random Demand Satisfaction in Unreliable Production-Inventory-Customer Systems.

[BibT_eX]

[DOI]

Emre Enginarlar

Ann. Oper. Res., 2004

Modeling and Analysis of a Multiple Product Manufacturing System with Split and Merge.

[BibT_eX]

[DOI]

Proceedings of the 2004 IEEE International Conference on Robotics and Automation, 2004

2001

Customer demand satisfaction in production systems: a due-time performance approach.

[BibT_eX]

[DOI]

IEEE Trans. Robotics Autom., 2001

Buffer capacity for accommodating machine downtime in serial production lines.

[BibT_eX]

[DOI]

Emre Enginarlar

Proceedings of the 40th IEEE Conference on Decision and Control, 2001

2000

Production variability in manufacturing systems: Bernoulli reliability case.

[BibT_eX]

[DOI]

Ann. Oper. Res., 2000

Bottlenecks with Respect to Due-Time Performance in Pull Serial Production Lines.

[BibT_eX]

[DOI]