Jiawen Hu

Orcid: 0000-0002-3523-6027

According to our database1, Jiawen Hu authored at least 35 papers between 2006 and 2024.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2024
Advances and novel applications in systems reliability and safety engineering (selected papers of the International Conference of SRSE 2022).
Qual. Reliab. Eng. Int., October, 2024

Non-periodic inspection and replacement policy of system subject to non-homogeneous gamma degradation process.
Qual. Reliab. Eng. Int., April, 2024

Maintenance optimization of a two-component series system considering masked causes of failure.
Qual. Reliab. Eng. Int., February, 2024

Effect of <sup>60</sup>Coγ ray radiation on electrical properties of SiGe HBTs at low temperatures.
Microelectron. J., February, 2024

2023
Preventive replacement policy of a system considering multiple maintenance actions upon a failure.
Qual. Reliab. Eng. Int., December, 2023

Integrated optimization of condition-based preventive maintenance and production rescheduling with multi-phase processing speed selection and old machine scrap.
Reliab. Eng. Syst. Saf., October, 2023

Five-Phase LLC Resonant DC/DC Converter Utilizing CLC Filter for Current Sharing.
IEEE Trans. Ind. Electron., September, 2023

Integrated optimization of non-permutation flow shop scheduling and maintenance planning with variable processing speed.
Reliab. Eng. Syst. Saf., June, 2023

A Sensor Fault Diagnosis Method for Single-Phase Three-Level Rectifier Used in Traction Systems.
Proceedings of the CAA Symposium on Fault Detection, 2023

2022
Replacement and Repair Optimization for Production Systems Under Random Production Waits.
IEEE Trans. Reliab., 2022

Wearable Personal Core Body Temperature Measurement Considering Individual Differences and Dynamic Tissue Blood Perfusion.
IEEE J. Biomed. Health Informatics, 2022

Joint optimization of preventive maintenance and production rescheduling with new machine insertion and processing speed selection.
Reliab. Eng. Syst. Saf., 2022

2021
Research on Pattern Synthesis of Time Modulated Sparse Array Based on Discrete Variable Convex Optimization.
Wirel. Commun. Mob. Comput., 2021

Condition-Based Maintenance Planning for Systems Subject to Dependent Soft and Hard Failures.
IEEE Trans. Reliab., 2021

Joint Modeling of Degradation and Lifetime Data for RUL Prediction of Deteriorating Products.
IEEE Trans. Ind. Informatics, 2021

Condition-based maintenance planning for multi-state systems under time-varying environmental conditions.
Comput. Ind. Eng., 2021

A Buck Converter for 5G NR RF-PA with 400ns Rise- and Fall-Time and Spread Spectrum Switching.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2021

2020
Availability Analysis and Preventive Maintenance Planning for Systems with General Time Distributions.
Reliab. Eng. Syst. Saf., 2020

Two preventive replacement strategies for systems with protective auxiliary parts subject to degradation and economic dependence.
Reliab. Eng. Syst. Saf., 2020

Opportunistic maintenance for two-component series systems subject to dependent degradation and shock.
Reliab. Eng. Syst. Saf., 2020

Predictive maintenance of systems subject to hard failure based on proportional hazards model.
Reliab. Eng. Syst. Saf., 2020

Optimal switching policy for warm standby systems subjected to standby failure mode.
IISE Trans., 2020

Periodic preventive maintenance planning for systems working under a Markovian operating condition.
Comput. Ind. Eng., 2020

2019
Joint Optimization of UAV Position, Time Slot Allocation, and Computation Task Partition in Multiuser Aerial Mobile-Edge Computing Systems.
IEEE Trans. Veh. Technol., 2019

Rapid Establishment Method of a Personalized Thermal Comfort Prediction Model.
Proceedings of the 41st Annual International Conference of the IEEE Engineering in Medicine and Biology Society, 2019

2018
An Anti-Aliasing Filter with a Programmable Bandwidth of 10-500MHz for Supply Modulator.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2018

A Current Balanced Multi-Phase Class-D Amplifier for Wideband Supply Modulator.
Proceedings of the 25th IEEE International Conference on Electronics, Circuits and Systems, 2018

2017
Preventive maintenance of a single machine system working under piecewise constant operating condition.
Reliab. Eng. Syst. Saf., 2017

Preventive maintenance of a batch production system under time-varying operational condition.
Int. J. Prod. Res., 2017

Joint Optimization of Production Plan and Preventive Maintenance Schedule by Stackelberg Game.
Asia Pac. J. Oper. Res., 2017

2015
Comics with Drama: New Communication in Wedia.
KSII Trans. Internet Inf. Syst., 2015

Integrated model of production plan and preventive maintenance based on a game-theoretic framework.
Proceedings of the 2015 IEEE International Conference on Industrial Engineering and Engineering Management, 2015

2011
Synchronization for general complex dynamical networks with sampled-data.
Neurocomputing, 2011

2008
Adaptive Filter by Using Segment Proportionate Extended Correlation LMS Algorithm in the Double-Talk Condition.
Proceedings of the 2008 International Symposium on Computer Science and Computational Technology, 2008

2006
A clock recovery circuit for blind equalization multi-Gbps serial data links.
Proceedings of the International Symposium on Circuits and Systems (ISCAS 2006), 2006


  Loading...