Jean-Pierre Kenné

Orcid: 0000-0002-2019-3589

According to our database1, Jean-Pierre Kenné authored at least 38 papers between 2001 and 2024.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of five.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2024
Estimation-based production control of manufacturing-remanufacturing systems with uncertain seasonal return and imprecise demand and inventory.
Int. J. Prod. Res., 2024

A novel approach for predicting Lockout/Tagout safety procedures for smart maintenance strategies.
Int. J. Prod. Res., 2024

2023
On the development of a smart architecture for a sustainable manufacturing-remanufacturing system: A literature review approach.
Comput. Ind. Eng., June, 2023

2021
Modelling for cost and productivity optimisation in sustainable manufacturing: a case of dry versus wet machining of mould steels.
Int. J. Prod. Res., 2021

Multi-scenario and multi-criteria approach to evaluate prediction techniques used to recognise failure patterns.
Int. J. Appl. Decis. Sci., 2021

A Hybrid Architecture for a Reconfigurable Cellular Remanufacturing System.
Proceedings of the Advances in Production Management Systems. Artificial Intelligence for Sustainable and Resilient Production Systems, 2021

2020
Joint optimization of production and maintenance strategies considering a dynamic sampling strategy for a deteriorating system.
Comput. Ind. Eng., 2020

2019
Production control of hybrid manufacturing-remanufacturing systems under demand and return variations.
Int. J. Prod. Res., 2019

2018
A chattering-free fuzzy hybrid sliding mode control of an electrohydraulic active suspension.
Trans. Inst. Meas. Control, 2018

Production and replacement policies for a deteriorating manufacturing system under random demand and quality.
Eur. J. Oper. Res., 2018

2017
Set-up and production planning in hybrid manufacturing-remanufacturing systems with large returns.
Int. J. Prod. Res., 2017

2016
Production Planning of a Failure-Prone Manufacturing System under Different Setup Scenarios.
J. Appl. Math., 2016

Production control of a deteriorated remanufacturing system within an open-reverse supply chain.
Proceedings of the 24th Mediterranean Conference on Control and Automation, 2016

2015
Development of a whole arm wearable robotic exoskeleton for rehabilitation and to assist upper limb movements.
Robotica, 2015

Failure-prone manufacturing systems with setups: feasibility and optimality under various hypotheses about perturbations and setup interplay.
Int. J. Math. Oper. Res., 2015

2013
Manufacturing-Remanufacturing Failure-Prone Systems under Random Demands.
Proceedings of the 7th IFAC Conference on Manufacturing Modelling, Management, and Control, 2013

Analytical Modelling and Control of a Hybrid Manufacturing/remanufacturing System.
Proceedings of the 7th IFAC Conference on Manufacturing Modelling, Management, and Control, 2013

2012
Feedback Linearization-Based Position Control of an Electrohydraulic Servo System With Supply Pressure Uncertainty.
IEEE Trans. Control. Syst. Technol., 2012

Simultaneous control of maintenance and production rates of a manufacturing system with defective products.
J. Intell. Manuf., 2012

Development of a 4DoFs exoskeleton robot for passive arm movement assistance.
Int. J. Mechatronics Autom., 2012

Cartesian trajectory tracking of an upper limb exoskeleton robot.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

Nonlinear Sliding Mode Control Implementation of an Upper Limb Exoskeleton Robot to Provide Passive Rehabilitation Therapy.
Proceedings of the Intelligent Robotics and Applications - 5th International Conference, 2012

2011
Dynamic Modeling and Evaluation of a Robotic Exoskeleton for Upper-Limb Rehabilitation.
Int. J. Inf. Acquis., 2011

Production control and replenishment strategy with multiple suppliers.
Eur. J. Oper. Res., 2011

Control of a powered exoskeleton for elbow, forearm and wrist joint movements.
Proceedings of the 2011 IEEE International Conference on Robotics and Biomimetics, 2011

Tele-operation of a robotic exoskeleton for rehabilitation and passive arm movement assistance.
Proceedings of the 2011 IEEE International Conference on Robotics and Biomimetics, 2011

Nonlinear control of an upper-limb exoskelton robot.
Proceedings of the 18th IEEE International Conference on Electronics, Circuits and Systems, 2011

2010
Joint production and supply control in three levels flexible manufacturing systems.
J. Intell. Manuf., 2010

2009
On the integrated production, inventory and preventive maintenance problem in manufacturing systems with backorder.
Int. J. Simul. Process. Model., 2009

Hierarchical decision making in production and repair/replacement planning with imperfect repairs under uncertainties.
Eur. J. Oper. Res., 2009

Modeling and control of a 7DOF exoskeleton robot for arm movements.
Proceedings of the IEEE International Conference on Robotics and Biomimetics, 2009

2007
Développement d'une politique intégrée de contrôle des taux de production et de maintenance corrective avec diagnostic.
INFOR Inf. Syst. Oper. Res., 2007

Age-dependent production planning and maintenance strategies in unreliable manufacturing systems with lost sale.
Eur. J. Oper. Res., 2007

2005
Maintenance scheduling and production control of multiple-machine manufacturing systems.
Comput. Ind. Eng., 2005

2004
Stohastic optimal production control problem with corrective maintenance.
Comput. Ind. Eng., 2004

A simulation optimization based control policy for failure prone one-machine, two-product manufacturing systems.
Comput. Ind. Eng., 2004

Position Control of an Electro-Hydraulic Servosystem - A Non-Linear Backstepping Approach.
Proceedings of the ICINCO 2004, 2004

2001
A simulation optimization approach in production planning of failure prone manufacturing systems.
J. Intell. Manuf., 2001


  Loading...