Ioan Tudosa

Orcid: 0000-0002-5127-578X

According to our database1, Ioan Tudosa authored at least 46 papers between 2011 and 2024.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2024
The Uncertainty Assessment by the Monte Carlo Analysis of NDVI Measurements Based on Multispectral UAV Imagery.
Sensors, May, 2024

A Compressed-Sensing System for Radio Spectrum Monitoring and Localization of Noncooperative Sources.
IEEE Trans. Instrum. Meas., 2024

IoT-Based System for Monitoring the Well-Being of Industrial Operators Through Wearable Devices.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2024

Assessment of a Bioimpedance Analog Front-End for Blood Pulse Wave Detection.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2024

Two-Wire Cable Anomaly Diagnosis with Machine Learning Based on Passive Measurements.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

An Improved Compressed Sensing-Based Method for Anomaly Detection in Cables Using Spread Spectrum Signals.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

2023
Operator 5.0: Enhancing the Physical Resilience of Workers in Assembly Lines.
Proceedings of the 2023 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2023

Measurement System for Operator 5.0: a Learning Fatigue Recognition based on sEMG Signals.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2023

Assessment of Sparse Fourier Transform for Spectral Measurements.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

2022
The Jitter Measurement Ways: The Instrumentation.
IEEE Instrum. Meas. Mag., 2022

Online diagnosis of automotive wireline channels: the role of measurements and instrumentation.
Proceedings of the IEEE International Workshop on Metrology for Automotive, 2022

A prototype of a wearable health device for mobile telemonitoring applications.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2022

A CS-based acquisition method of acoustic emission signals from distributed SHM systems.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

ST-Segment Anomalies Detection from Compressed Sensing Based ECG Data by Means of Machine Learning.
Proceedings of the Biomedical Engineering Systems and Technologies, 2022

2021
A Dictionary Optimization Method for Reconstruction of ECG Signals after Compressed Sensing.
Sensors, 2021

Sensors and Measurements for UAV Safety: An Overview.
Sensors, 2021

Guidelines for an Unmanned Aerial Vehicle-Based Measurement Instrument Design.
IEEE Instrum. Meas. Mag., 2021

An undershirt for monitoring of multi-lead ECG and respiration wave signals.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2021

Compressive Sampling on RFSoC for Distributed Wideband RF Spectrum Measurements.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

Multi-class Detection of Arrhythmia Conditions Through the Combination of Compressed Sensing and Machine Learning.
Proceedings of the Biomedical Engineering Systems and Technologies, 2021

Morphological Classification of Heartbeats in Compressed ECG.
Proceedings of the 14th International Joint Conference on Biomedical Engineering Systems and Technologies, 2021

2020
A Compressive Sampling-Based Channel Estimation Method for Network Visibility Instrumentation.
IEEE Trans. Instrum. Meas., 2020

A Method Exploiting Compressive Sampling for Localization of Radio Frequency Emitters.
IEEE Trans. Instrum. Meas., 2020

The jitter measurement ways: The jitter decomposition.
IEEE Instrum. Meas. Mag., 2020

A New Method for Dictionary Matrix Optimization in ECG Compressed Sensing.
Proceedings of the 2020 IEEE International Symposium on Medical Measurements and Applications, 2020

Identification of R-peak occurrences in compressed ECG signals.
Proceedings of the 2020 IEEE International Symposium on Medical Measurements and Applications, 2020

A TDoA-based Measurement Method for RF Emitters Localization by Exploiting Wideband Compressive Sampling.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

A Novel CS-based Measurement Method for Impairments Identification in Wireline Channels.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

A Bandpass Sampling Scheme Based on Asynchronous Time Interleaving.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

MIPHAS: Military Performances and Health Analysis System.
Proceedings of the 13th International Joint Conference on Biomedical Engineering Systems and Technologies (BIOSTEC 2020), 2020

Technologies for Motion Measurements in Connected Health Scenario.
Proceedings of the Connected Health in Smart Cities, 2020

2019
The jitter measurement ways: The jitter graphs.
IEEE Instrum. Meas. Mag., 2019

Hardware Security in IoT era: the Role of Measurements and Instrumentation.
Proceedings of the 2nd Workshop on Metrology for Industry 4.0 and IoT MetroInd4.0&IoT 2019, 2019

A Flexible DAQ Hardware Architecture using SoCs for IoT based Structural Health Monitoring Systems.
Proceedings of the 2nd Workshop on Metrology for Industry 4.0 and IoT MetroInd4.0&IoT 2019, 2019

IoT System for Remote Monitoring of Bridges: Measurements for Structural Health and Vehicular Traffic Load.
Proceedings of the 2nd Workshop on Metrology for Industry 4.0 and IoT MetroInd4.0&IoT 2019, 2019

An Overview on Internet of Medical Things in Blood Pressure Monitoring.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2019

A Novel Method for Compressed Sensing based Sampling of ECG Signals in Medical-IoT era.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2019

The architecture of an innovative smart T-shirt based on the Internet of Medical Things paradigm.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2019

Wireline channel estimation by compressive sampling for physical layer testing.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

Localization of radio emitters by wideband compressive sampling.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

2018
A Survey of Measurement Applications Based on IoT.
Proceedings of the 2018 Workshop on Metrology for Industry 4.0 and IoT, 2018

Assessment of analog-to-information converters based on non-uniform sampling for spectrum analysis.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

2017
Analog-to-information converters in the wideband rf measurement for aerospace applications: current situation and perspectives.
IEEE Instrum. Meas. Mag., 2017

2014
Network design and characterization of a Wireless Active Guardrail System.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

2013
Wireless active guardrail for traffic safety: Preliminary tests of speed and proximity measurement.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

2011
Progress and outlook for STT-MRAM.
Proceedings of the 2011 IEEE/ACM International Conference on Computer-Aided Design, 2011


  Loading...