Hao Ma
Orcid: 0000-0002-4714-0233Affiliations:
- Zhejiang University, College of Electrical Engineering, Hangzhou, China
- University of Illinois at Urbana-Champaign Institute, IL, USA
- North Carolina State University, Delta Visiting Scholar, NC, USA (2007 - 2008)
- Zhejiang University, Department of lectrical engineering, Hangzhou, China (PhD 1997)
According to our database1,
Hao Ma
authored at least 72 papers
between 2012 and 2025.
Collaborative distances:
Collaborative distances:
Timeline
Legend:
Book In proceedings Article PhD thesis Dataset OtherLinks
Online presence:
-
on orcid.org
On csauthors.net:
Bibliography
2025
IEEE Trans. Ind. Electron., January, 2025
2024
Low-Side-Extended-Phase-Shift-Under-Resonant Modulation Scheme for Dual-Bridge-Series-Resonant Converter.
IEEE Trans. Ind. Electron., December, 2024
Temporal Modeling for Power Converters With Physics-in-Architecture Recurrent Neural Network.
IEEE Trans. Ind. Electron., November, 2024
A Semi-Supervised Learning Framework Based on EMD and SGAN for Online Stability Monitoring of DC Power Electronic Systems.
IEEE Trans. Ind. Electron., October, 2024
IEEE Trans. Ind. Electron., September, 2024
Multioutput Wireless Charger for Drone Swarms With Reduced Switch Requirements and Independent Regulation Capability.
IEEE Trans. Ind. Electron., May, 2024
A Series Impedance Reshaping Control Method Considering PLL Dynamics for Grid-Connected Inverters Under Weak Grid Conditions.
IEEE Trans. Ind. Electron., May, 2024
Improved Dual Active Bridge DC-DC Converter With Symmetric Bipolar Output by Utilizing a Switched-Capacitor Circuit for Bipolar DC Distribution System.
IEEE Trans. Ind. Electron., 2024
PE-GPT: A Physics-Informed Interactive Large Language Model for Power Converter Modulation Design.
CoRR, 2024
2023
IEEE Trans. Ind. Electron., November, 2023
Balanced Dual-Side LCC Compensation in IPT Systems Implementing Unity Power Factor for Wide Load Range and Misalignment Tolerance.
IEEE Trans. Ind. Electron., August, 2023
A Single-Phase Common-Ground Five-Level Transformerless Inverter With Low Component Count for PV Applications.
IEEE Trans. Ind. Electron., 2023
A Soft-Switching Four-Port Integrated Converter Topology Based on Residential PV Energy Storage and Charging Application.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023
An Intermediate Coil for Misalignment Tolerant IPT System with Dual Decoupled Receivers.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023
Analysis and Design of Bidirectional Bipolar Multiport DC Converter with Low Voltage Stress and High Gain for Bipolar DC Microgrid Applications.
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023
Proceedings of the 49th Annual Conference of the IEEE Industrial Electronics Society, 2023
2022
A SiC and Si Hybrid Five-Level Unidirectional Rectifier for Medium Voltage Applications.
IEEE Trans. Ind. Electron., 2022
A Dual Shunt Inductor Compensated IPT System With Nearly Unity Power Factor for Wide Load Range and Misalignment Tolerance.
IEEE Trans. Ind. Electron., 2022
Design of Symmetrical CLLC-Resonant DC Transformer Considering Voltage Transfer Ratio and Cascaded System Stability.
IEEE Trans. Ind. Electron., 2022
Impedance-Shaping-Based Stability Control of Point-of-Load Converter Integrated With EMI Filter in DC Microgrids.
IEEE Access, 2022
2021
Lyapunov-Based Large-Signal Control of Three-Phase Stand-Alone Inverters With Inherent Dual Control Loops and Load Disturbance Adaptivity.
IEEE Trans. Ind. Electron., 2021
Modular Four-Channel 50 kW WPT System With Decoupled Coil Design for Fast EV Charging.
IEEE Access, 2021
A Gyrator-Based Converting-Splitting Method of Designing Inductive Power Transfer Systems With Constant Current and Constant Voltage Charging.
Proceedings of the 30th IEEE International Symposium on Industrial Electronics, 2021
Design of an Inductive Power Transfer System with Constant Current and Constant Voltage Outputs Based on Multi-frequency Circuit.
Proceedings of the 30th IEEE International Symposium on Industrial Electronics, 2021
Analysis and Design of an IPT System Based on Shunt Inductor Compensation for Battery Charging Applications.
Proceedings of the 30th IEEE International Symposium on Industrial Electronics, 2021
Multiple Coils IPT System Implementing CV Output Characteristics with Improved Misalignment Tolerance.
Proceedings of the 30th IEEE International Symposium on Industrial Electronics, 2021
2020
An Orthogonal Decoupled Transformer Design for Inductive Power Transfer Applications.
Proceedings of the 29th IEEE International Symposium on Industrial Electronics, 2020
Proceedings of the 46th Annual Conference of the IEEE Industrial Electronics Society, 2020
Proceedings of the 46th Annual Conference of the IEEE Industrial Electronics Society, 2020
2019
Analysis and Injection Control of Circulating Current for Modular Multilevel Converters.
IEEE Trans. Ind. Electron., 2019
A New LLC Converter with Wide Output Voltage Range and Improved Efficiency at Medium or Low Output Voltage.
Proceedings of the 28th IEEE International Symposium on Industrial Electronics, 2019
Dual Current Feedback Active Damping for Improving Transient Performance of LCL-filter-based Grid-connected Inverter.
Proceedings of the 28th IEEE International Symposium on Industrial Electronics, 2019
A Control Method Based on Minimum Conduction Losses for High Efficiency Isolated Dual-bridge Series Resonant Converters.
Proceedings of the IECON 2019, 2019
2018
IEEE Trans. Ind. Electron., 2018
An Inductive Power Transfer System Design with Large Misalignment Tolerance for EV Charging.
Proceedings of the 27th IEEE International Symposium on Industrial Electronics, 2018
A Fast Average Model-Based Method for IGBT and Current Sensor Fault Diagnosis in Grid- Tied Inverters.
Proceedings of the IECON 2018, 2018
An Average Model-Based Transistor Open-Circuit Fault Diagnosis Method for Grid- Tied Single-Phase Inverter.
Proceedings of the IECON 2018, 2018
An IPT System with Constant Current and Constant Voltage Output Features for EV Charging.
Proceedings of the IECON 2018, 2018
2017
Proceedings of the 26th IEEE International Symposium on Industrial Electronics, 2017
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017
The switching frequency optimization of dual phase shift control for dual active bridge DC-DC converter.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017
2016
Design methodology of LLC converters based on simplified mode analysis for wide output range.
Proceedings of the 25th IEEE International Symposium on Industrial Electronics, 2016
Open-transistor faults diagnosis in voltage-source inverter based on phase voltages with sliding-window counting method.
Proceedings of the IECON 2016, 2016
An efficient algorithm strategy for synchronous rectification used in LLC resonant converters.
Proceedings of the IECON 2016, 2016
A soft-commutation Space Vector Modulation (SVM) for current source converter with full-range power factor.
Proceedings of the IECON 2016, 2016
2015
An improved analytical model of GaN HEMT in cascode configuration during turn-on transition.
Proceedings of the 24th IEEE International Symposium on Industrial Electronics, 2015
Comparison of two diagnosis methods based on switching voltage pattern for IGBTs open-circuit faults in voltage-source inverters.
Proceedings of the 24th IEEE International Symposium on Industrial Electronics, 2015
Proceedings of the 24th IEEE International Symposium on Industrial Electronics, 2015
An improved analytical IGBT model for loss calculation including junction temperature and stray inductance.
Proceedings of the 24th IEEE International Symposium on Industrial Electronics, 2015
Design and optimizations of solenoid magnetic structure for inductive power transfer in EV applications.
Proceedings of the IECON 2015, 2015
An enhanced power sharing strategy for islanded microgrids using adaptive virtual impedances.
Proceedings of the IECON 2015, 2015
Parallel operation of three-phase inverters with virtual oscillator and multi-resonant control.
Proceedings of the IECON 2015, 2015
2014
Analysis of Networked Control Schemes and Data-Processing Method for Parallel Inverters.
IEEE Trans. Ind. Electron., 2014
Resonance Damping and Harmonic Suppression for Grid-Connected Current-Source Converter.
IEEE Trans. Ind. Electron., 2014
A practical core loss calculation method of filter inductors in PWM inverters based on the modified Steinmetz equation.
Proceedings of the 23rd IEEE International Symposium on Industrial Electronics, 2014
Modeling and analysis of switching frequency circulating current in three-phase parallel inverters.
Proceedings of the 23rd IEEE International Symposium on Industrial Electronics, 2014
Proceedings of the 23rd IEEE International Symposium on Industrial Electronics, 2014
Wireless current sharing scheme considering phase synchronization requirement for paralleled online UPS inverters.
Proceedings of the 23rd IEEE International Symposium on Industrial Electronics, 2014
Frequency adaptive repetitive controller for grid-connected inverter with an all-pass infinite impulse response (IIR) filter.
Proceedings of the 23rd IEEE International Symposium on Industrial Electronics, 2014
Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014
2013
A new ZVCS resonant voltage-fed push-pull converter for vehicle inverter application.
Proceedings of the 22nd IEEE International Symposium on Industrial Electronics, 2013
Energy recycling load system with a high gain DC-DC converter for ultra low voltage power supplies.
Proceedings of the 22nd IEEE International Symposium on Industrial Electronics, 2013
Improved switching loss calculation in neutral point clamped inverter via waveforms linearization.
Proceedings of the 22nd IEEE International Symposium on Industrial Electronics, 2013
Proceedings of the IECON 2013, 2013
Improved high step-up DC-DC converter based on active clamp coupled inductor with voltage double cells.
Proceedings of the IECON 2013, 2013
Modeling and analysis of three-phase inverter based on generalized state space averaging method.
Proceedings of the IECON 2013, 2013
2012
Theoretical and Experimental Investigation of Networked Control for Parallel Operation of Inverters.
IEEE Trans. Ind. Electron., 2012
An active-clamping current-fed push-pull converter for vehicle inverter application and resonance analysis.
Proceedings of the 21st IEEE International Symposium on Industrial Electronics, 2012
Proceedings of the 21st IEEE International Symposium on Industrial Electronics, 2012
A current-sharing method based on networked control for three-phase parallel inverter.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012
A sliding-mode control scheme for llc resonant DC/DC converter with fast transient response.
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012
Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012