Giuseppe Ferri

Orcid: 0000-0002-8060-9558

According to our database1, Giuseppe Ferri authored at least 99 papers between 1996 and 2024.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2024
A Rail-to-Rail Second Generation Voltage Conveyor for Low-Power Applications.
Proceedings of the 19th Conference on Ph.D Research in Microelectronics and Electronics, 2024

Low-Power VCII-Based Current-Mode Schmitt Trigger with High Drive Capabilities.
Proceedings of the 19th Conference on Ph.D Research in Microelectronics and Electronics, 2024

A Low Power Digital Addressable Lighting Interface System for Daylight Control.
Proceedings of the 10th International Conference on Automation, Robotics and Applications, 2024

2023
Wireless Sensor Network-Based Rockfall and Landslide Monitoring Systems: A Review.
Sensors, August, 2023

A Survey on Current-Mode Interfaces for Bio Signals and Sensors.
Sensors, March, 2023

Editorial for the Special Issue on Electronics for Sensors II.
Sensors, February, 2023

LoRa Structural Monitoring Wireless Sensor Networks.
Proceedings of the 12th International Conference on Sensor Networks, 2023

Demonstration of Multi-Hop Mode-Group Routing in a Field-Deployed Multi-Mode Fiber Network.
Proceedings of the Optical Fiber Communications Conference and Exhibition, 2023

Partial MIMO-based Mode Division Multiplexing Transmission over the First Field-Deployed 15-Mode Fiber in Metro Scenario.
Proceedings of the Optical Fiber Communications Conference and Exhibition, 2023

Mode-Group-Division Multiplexing over a Deployed 15-Mode-Fiber Cable.
Proceedings of the Optical Fiber Communications Conference and Exhibition, 2023

A VCII-based RC Sinusoidal VFO as Capacitive Sensor Interfaces.
Proceedings of the 9th International Workshop on Advances in Sensors and Interfaces, 2023

A novel interface architecture for differential capacitive sensors.
Proceedings of the 9th International Workshop on Advances in Sensors and Interfaces, 2023

Analog Electronic Systems for Biomedical Sensor Applications: a Review on Current Mode Approach.
Proceedings of the International Workshop on Biomedical Applications, 2023

CMOS Adaptive Biased Second Generation Voltage Conveyor.
Proceedings of the International Workshop on Biomedical Applications, 2023

2022
A Review on VCII Applications in Signal Conditioning for Sensors and Bioelectrical Signals: New Opportunities.
Sensors, 2022

A LoRaWAN Multi-Technological Architecture for Construction Site Monitoring.
Sensors, 2022

A New Architecture Proposal of Half-wave Precision Rectifier using a Single VCII.
Proceedings of the 11th International Conference on Sensor Networks, 2022

Flood monitoring: a LoRa based case-study in the city of L'Aquila.
Proceedings of the 17th Conference on Ph.D Research in Microelectronics and Electronics, 2022

Smart Access Control System for Industrial Machines and Vehicles based on RFID Technology.
Proceedings of the 8th International Conference on Information and Communication Technologies for Ageing Well and e-Health, 2022

Towards Smart Sensor Systems for Precision Farming: Electrode Potential Energy Harvesting from Plants' Soil.
Proceedings of the 29th IEEE International Conference on Electronics, Circuits and Systems, 2022

3D-Printed Capacitive Accelerometers.
Proceedings of the Sensors and Microsystems, 2022

LoRa-Based Wireless Sensor Network System for Aquatic Elements and Flood Early Warning Monitoring.
Proceedings of the Sensors and Microsystems, 2022

Smart Internet of Things (IoT) System for Construction Sites Monitoring.
Proceedings of the Sensors and Microsystems, 2022

2021
A Novel Actuating-Sensing Bone Conduction-Based System for Active Hand Pose Sensing and Material Densities Evaluation Through Hand Touch.
IEEE Trans. Instrum. Meas., 2021

A New Extremely Low Power Temperature Insensitive Electronically Tunable VCII-Based Grounded Capacitance Multiplier.
IEEE Trans. Circuits Syst. II Express Briefs, 2021

Development and Test of a Portable ECG Device with Dry Capacitive Electrodes and Driven Right Leg Circuit.
Sensors, 2021

Electronics for Sensors.
Sensors, 2021

A Ladder Network Theoretical Approach for the Automatic Monitoring of Distributed Sensors.
Proceedings of the Sensors and Microsystems - Proceedings of AISEM 2021, 2021

Smart Multifunctional Panel for Industry 4.0.
Proceedings of the Sensors and Microsystems - Proceedings of AISEM 2021, 2021

Sensors and Interfaces for Structural Health Monitoring.
Proceedings of the Sensors and Microsystems - Proceedings of AISEM 2021, 2021

Time Continuous VCII-Based Fully Analog Interface for Differential Capacitive Sensors.
Proceedings of the Sensors and Microsystems - Proceedings of AISEM 2021, 2021

2020
Full-Analog Parasitic Capacitance Compensation for AC-Excited Differential Sensors.
IEEE Trans. Instrum. Meas., 2020

A New High Drive Class-AB FVF-Based Second Generation Voltage Conveyor.
IEEE Trans. Circuits Syst. II Express Briefs, 2020

Structural Health Monitoring: An IoT Sensor System for Structural Damage Indicator Evaluation.
Sensors, 2020

A second-generation voltage conveyor (VCII)-based simulated grounded inductor.
Int. J. Circuit Theory Appl., 2020

New mixed-mode second-generation voltage conveyor based first-order all-pass filter.
IET Circuits Devices Syst., 2020

Simple and power efficient interface for AC-excited differential sensors.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

2019
An Overview on the Second Generation Voltage Conveyor: Features, Design and Applications.
IEEE Trans. Circuits Syst. II Express Briefs, 2019

A VCII-Based Stray Insensitive Analog Interface for Differential Capacitance Sensors.
Sensors, 2019

Print On Air: FDM 3D Printing Without Supports.
Proceedings of the 2nd Workshop on Metrology for Industry 4.0 and IoT MetroInd4.0&IoT 2019, 2019

Sensor monitoring system for PV plant with active load.
Proceedings of the IEEE 8th International Workshop on Advances in Sensors and Interfaces, 2019

Wired Sensors System for Monitoring of Landslide Events.
Proceedings of the ICVISP 2019: 3rd International Conference on Vision, 2019

Spice Model of Photovoltaic Panel for Electronic System Design.
Proceedings of the Applications in Electronics Pervading Industry, Environment and Society, 2019

2018
Autobalancing Analog Front End for Full-Range Differential Capacitive Sensing.
IEEE Trans. Instrum. Meas., 2018

CCII-Based Voltage Amplifier Optimization for Reduced Relative Gain Error.
Circuits Syst. Signal Process., 2018

Electronic System for Structural and Environmental Building Monitoring.
Proceedings of the Sensors, 2018

New Current Mode Wheatstone Bridge Topologies with Intrinsic Linearity.
Proceedings of the 14th Conference on Ph.D. Research in Microelectronics and Electronics, 2018

A human body powered sensory glove system based on multisource energy harvester.
Proceedings of the 14th Conference on Ph.D. Research in Microelectronics and Electronics, 2018

Fully analog automatic stray compensation for bridge-based differential capacitive sensor interfaces.
Proceedings of the 2018 International Conference on IC Design & Technology, 2018

2017
An Electronic System for the Contactless Reading of ECG Signals.
Sensors, 2017

A CCII-based non-inverting Schmitt trigger and its application as astable multivibrator for capacitive sensor interfacing.
Int. J. Circuit Theory Appl., 2017

Full range analog Wheatstone bridge-based automatic circuit for differential capacitance sensor evaluation.
Int. J. Circuit Theory Appl., 2017

Current-mode differential capacitance to voltage converter for position sensing.
Proceedings of the 2017 European Conference on Circuit Theory and Design, 2017

Class-AB current conveyors based on the FVF.
Proceedings of the 2017 European Conference on Circuit Theory and Design, 2017

Power-efficient dynamic-biased CCII.
Proceedings of the 2017 European Conference on Circuit Theory and Design, 2017

Contactless Detection of ECG Signals: Sensor Architecture and Simulation.
Proceedings of the 41st IEEE Annual Computer Software and Applications Conference, 2017

2016
A Low Cost Flexible Power Line Communication System.
Proceedings of the Sensors, 2016

Integrable Autonomous Devices for WSNs.
Proceedings of the Sensors, 2016

CCII-Based Linear Ratiometric Capacitive Sensing by Analog Read-Out Circuits.
Proceedings of the Sensors, 2016

Voltage-Mode Analog Interfaces for Differential Capacitance Position Transducers.
Proceedings of the Sensors, 2016

Analog current-mode interfaces for differential capacitance sensing.
Proceedings of the IEEE Sensors Applications Symposium, 2016

2015
A Fully Analog High Performances Automatic System for Phase Measurement of Electrical and Optical Signals.
IEEE Trans. Instrum. Meas., 2015

Uncalibrated operational amplifier-based sensor interface for capacitive/resistive sensor applications.
IET Circuits Devices Syst., 2015

A standard CMOS technology fully-analog differential capacitance sensor front-end.
Proceedings of the 6th International Workshop on Advances in Sensors and Interfaces, 2015

2014
A new 0.35 μm CMOS electronic interface for wide range floating capacitive and grounded/floating resistive sensor applications.
Microelectron. J., 2014

Uncalibrated automatic bridge-based CMOS integrated interfaces for wide-range resistive sensors portable applications.
Microelectron. J., 2014

2013
A CCII-based wide frequency range square waveform generator.
Int. J. Circuit Theory Appl., 2013

A new single-chip analog lock-in amplifier with automatic phase and frequency tuning for physical/chemical noisy phenomena detection.
Proceedings of the 5th IEEE International Workshop on Advances in Sensors and Interfaces, 2013

2011
A CCII-Based High Impedance Input Stage for Biomedical Applications.
J. Circuits Syst. Comput., 2011

2010
A New and Fast-Readout Interface for Resistive Chemical Sensors.
IEEE Trans. Instrum. Meas., 2010

2009
A novel low-voltage low-power fully differential voltage and current gained CCII for floating impedance simulations.
Microelectron. J., 2009

Cmos Pulse Generator for BPSK, OOK, PAM, and PPM Modulations.
J. Circuits Syst. Comput., 2009

Integrated CMOS Resistance-to-period Converter with Parasitic Capacitance Evaluation.
Proceedings of the International Symposium on Circuits and Systems (ISCAS 2009), 2009

2008
A CMOS Integrable Oscillator-Based Front End for High-Dynamic-Range Resistive Sensors.
IEEE Trans. Instrum. Meas., 2008

Vibration Damping Using CCII-Based Inductance Simulators.
IEEE Trans. Instrum. Meas., 2008

Current-Mode High-Accuracy High-Precision CMOS Amplifiers.
IEEE Trans. Circuits Syst. II Express Briefs, 2008

2007
Ladder-Network-Based Model for Interconnects and Transmission Lines Time Delay and cutoff Frequency Determination.
J. Circuits Syst. Comput., 2007

High-Accuracy, High-Precision DEM-CCII Amplifiers.
Proceedings of the International Symposium on Circuits and Systems (ISCAS 2007), 2007

A rail-to-rail DC-enhanced adaptive biased fully differential OTA.
Proceedings of the 18th European Conference on Circuit Theory and Design, 2007

CCII-based high-valued inductance simulators with minumum number of active elements.
Proceedings of the 18th European Conference on Circuit Theory and Design, 2007

2006
A tunable 0.5-1.3 GHz CMOS 2nd order bandpass filter with 50 Omega input-output impedance matching.
Proceedings of the International Symposium on Circuits and Systems (ISCAS 2006), 2006

Temperature and flow velocity control for quartz crystal microbalances.
Proceedings of the International Symposium on Circuits and Systems (ISCAS 2006), 2006

A ladder network delay model for coupled interconnects.
Proceedings of the International Symposium on Circuits and Systems (ISCAS 2006), 2006

2005
A novel current-mode very low power analog CMOS four quadrant multiplier.
Proceedings of the 31st European Solid-State Circuits Conference, 2005

A novel CMOS temperature control system for resistive gas sensor arrays.
Proceedings of the 2005 European Conference on Circuit Theory and Design, 2005

Ladder network modeling for closed-form interconnect time delay determination.
Proceedings of the 2005 European Conference on Circuit Theory and Design, 2005

2004
An ultralow-power switched opamp-based 10-B integrated ADC for implantable biomedical applications.
IEEE Trans. Circuits Syst. I Regul. Pap., 2004

2003
A current-mode 1kHz/10kHz low-voltage integrated analogue PLL for lock-in portable applications.
Int. J. Circuit Theory Appl., 2003

2001
Low‐voltage rail‐to‐rail switched buffer topologies.
Int. J. Circuit Theory Appl., 2001

Low-voltage low-power novel CCII topologies and applications.
Proceedings of the 2001 8th IEEE International Conference on Electronics, 2001

Low-voltage low-power adaptive biased high-efficiency integrated amplifiers.
Proceedings of the 2001 8th IEEE International Conference on Electronics, 2001

Study of the damping processes in thickness shear mode resonator chemical sensors.
Proceedings of the 2001 8th IEEE International Conference on Electronics, 2001

2000
A low‐voltage, low‐power CMOS phase shifter.
Int. J. Circuit Theory Appl., 2000

A low-voltage CMOS phase shifter as a resistive sensor transducer.
Proceedings of the IEEE International Symposium on Circuits and Systems, 2000

1999
A low-voltage CMOS 1-Hz low-pass filter.
Proceedings of the 6th IEEE International Conference on Electronics, Circuits and Systems, 1999

Bipolar and CMOS low voltage-supply reduced-power voltage followers.
Proceedings of the 6th IEEE International Conference on Electronics, Circuits and Systems, 1999

1998
A 1.2 V rail-to-rail switched buffer.
Proceedings of the 5th IEEE International Conference on Electronics, Circuits and Systems, 1998

1997
A rail-to-rail constant-g<sub>m</sub> low-voltage CMOS operational transconductance amplifier.
IEEE J. Solid State Circuits, 1997

1996
A low-voltage reduced-power constant-g<sub>m</sub> rail-to-rail fully differential CMOS op-amp.
Proceedings of Third International Conference on Electronics, Circuits, and Systems, 1996


  Loading...