Giovanni Betta

Orcid: 0000-0003-0363-7982

According to our database1, Giovanni Betta authored at least 61 papers between 1998 and 2024.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of five.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2024
S-Parameter Analysis of Age Testing Effects on FR4-Based Printed Circuit Boards up to 10 GHz.
Proceedings of the 2024 IEEE International Symposium on Measurements & Networking (M&N), 2024

The Impact of Energy Measurement in Fault Detection: A Preliminary Analysis of Load Profiling Capability.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

2023
Human exposure to 5G systems: experimental analysis and measurement issues in FR1 and FR2 operating bands.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

2022
Stress Testing for Performance Analysis of Orientation Estimation Algorithms.
IEEE Trans. Instrum. Meas., 2022

Experimental analysis of 5G pilot signals' variability in urban scenarios.
Proceedings of the IEEE International Symposium on Measurements & Networking, 2022

Temperature stress tests on low-cost IMU systems: Analysis and first proposal for enhancing performance.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

5G DSS communications: pilot signals' variability analysis from measurements on the field.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

Coronavirus Label-Free Immunosensor: Preliminary Results.
Proceedings of the Sensors and Microsystems, 2022

2021
Human Exposure to 4G LTE Systems: Enhancing the Reliability of EMF Extrapolation Techniques Based on Spectrum Analyzer Measurements.
IEEE Trans. Instrum. Meas., 2021

LTE Human Exposure Evaluation: Maximum RF Field Strength Extrapolation Technique Repeatability Analysis.
IEEE Trans. Instrum. Meas., 2021

Repeatability analysis of decoder-based EMF exposure measurements in LTE cellular systems.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

Characterization of 3D Image-Based Biometric Systems in Dynamic Acquisition Conditions.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

2020
On the Measurement of Human Exposure to Cellular Networks.
IEEE Instrum. Meas. Mag., 2020

On the Reliability of Extrapolation Techniques for Verifying the Compliance of LTE Cellular Systems with RF Human Exposure Limits.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

2019
Contaminants detection and classification through a customized IoT-based platform: A case study.
IEEE Instrum. Meas. Mag., 2019

Experimental Comparison of Extrapolation Techniques for 24-Hours Electromagnetic Fields Human Exposure Evaluation to UMTS and LTE Base Stations.
Proceedings of the 5th IEEE International Symposium on Measurements & Networking, 2019

2018
Fast Eddy Current Testing Defect Classification Using Lissajous Figures.
IEEE Trans. Instrum. Meas., 2018

Improvement of the Frequency Behavior of an EC-NDT Inspection System.
Proceedings of the Sensors, 2018

Characterization of a TMR Sensor for EC-NDT Applications.
Proceedings of the Sensors, 2018

ECT probe improvement for in-service non-destructive testing on conductive materials.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

2017
Sensitivity analysis of influence quantities on signal-to-noise ratio in face-based recognition systems.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

2016
Improving the Performance of an AMR-Based Current Transducer for Metering Applications.
Proceedings of the Sensors, 2016

2015
A Proposal for the Management of the Measurement Uncertainty in Classification and Recognition Problems.
IEEE Trans. Instrum. Meas., 2015

2014
An Experimental Setup for the Calibration of Acoustic Antenna.
IEEE Trans. Instrum. Meas., 2014

Multifrequency Excitation and Support Vector Machine Regressor for ECT Defect Characterization.
IEEE Trans. Instrum. Meas., 2014

Optimized complex signals for Eddy Current Testing.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

Managing the uncertainty for face classification with 3D features.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

Proposal and analysis of new algorithms for wideband spectrum sensing in cognitive radio.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

2013
Cost-Effective FPGA Instrument for Harmonic and Interharmonic Monitoring.
IEEE Trans. Instrum. Meas., 2013

Face Based Recognition Algorithms: A First Step Toward a Metrological Characterization.
IEEE Trans. Instrum. Meas., 2013

Crack Depth Estimation by Using a Multi-Frequency ECT Method.
IEEE Trans. Instrum. Meas., 2013

Modelling, parametric analysis, and optimization of an experimental set-up for acoustic antenna calibration.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Face based recognition algorithms: The use of uncertainty in the classification.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

A novel biaxial probe implementing multifrequency excitation and SVM processing for NDT.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

2012
GMR-Based ECT Instrument for Detection and Characterization of Crack on a Planar Specimen: A Hand-Held Solution.
IEEE Trans. Instrum. Meas., 2012

2011
The accurate calibration of EMC antennas in compact chambers - Measurements and uncertainty evaluations.
Comput. Stand. Interfaces, 2011

2010
Influence of Wi-Fi Computer Interfaces on Measurement Apparatuses.
IEEE Trans. Instrum. Meas., 2010

2008
A Methodology to Test Instrument Software: An Automotive Diagnostic System Application.
IEEE Trans. Instrum. Meas., 2008

A Statistical Approach for Improving the Performance of a Testing Methodology for Measurement Software.
IEEE Trans. Instrum. Meas., 2008

Experimental Investigation of the Electromagnetic Interference of ZigBee Transmitters on Measurement Instruments.
IEEE Trans. Instrum. Meas., 2008

2007
Influence of Wi-Fi computer interfaces on RF measurement systems.
Proceedings of the IEEE International Conference on Virtual Environments, 2007

2006
Reproducibility and Uncertainty of Conducted Emission Measurements for Adjustable-Speed Electrical Power Drive Characterization.
IEEE Trans. Instrum. Meas., 2006

2005
SVM-based approach for instrument fault accomodation in automotive systems.
Proceedings of the IEEE International Conference on Virtual Environments, 2005

2004
Uncertainty evaluation in algorithms with conditional statement.
IEEE Trans. Instrum. Meas., 2004

Evaluation of the measurement uncertainties in the conducted emissions from adjustable speed electrical power drive systems.
IEEE Trans. Instrum. Meas., 2004

An automated self-calibrated instrument for nondestructive testing on conductive materials.
IEEE Trans. Instrum. Meas., 2004

A biaxial probe for nondestructive testing on conductive materials.
IEEE Trans. Instrum. Meas., 2004

2003
Improving nondestructive testing probe performance by digital processing techniques.
IEEE Trans. Instrum. Meas., 2003

2002
A DSP-based FFT-analyzer for the fault diagnosis of rotating machine based on vibration analysis.
IEEE Trans. Instrum. Meas., 2002

Characterization of an eddy-current-based system for nondestructive testing.
IEEE Trans. Instrum. Meas., 2002

2001
An enhanced fiber-optic temperature sensor system for power transformer monitoring.
IEEE Trans. Instrum. Meas., 2001

A multi-application FFT analyzer based on a DSP architecture.
IEEE Trans. Instrum. Meas., 2001

2000
Temperature measurement by multifiber optical sensor.
IEEE Trans. Instrum. Meas., 2000

Instrument fault detection and isolation: state of the art and new research trends.
IEEE Trans. Instrum. Meas., 2000

An intrinsic fiber optic temperature sensor.
IEEE Trans. Instrum. Meas., 2000

A measurement system based on magnetic sensors for nondestructive testing.
IEEE Trans. Instrum. Meas., 2000

1998
Microcontroller-based performance enhancement of an optical fiber level transducer.
IEEE Trans. Instrum. Meas., 1998

A Gray-code-based fiber optic liquid level transducer.
IEEE Trans. Instrum. Meas., 1998

Comparison between IFDI schemes based on expert systems and neural networks.
IEEE Trans. Instrum. Meas., 1998

An advanced neural-network-based instrument fault detection and isolation scheme.
IEEE Trans. Instrum. Meas., 1998

An intelligent FFT-analyzer.
IEEE Trans. Instrum. Meas., 1998


  Loading...