Gérard-André Capolino

According to our database, Gérard-André Capolino authored at least 50 papers between 2000 and 2021.

Collaborative distances:

• Dijkstra number of five.
• Erdős number of four.

2021

Regression Models With Graph-Regularization Learning Algorithms for Accurate Fault Location in Smart Grids.

Hossein Hassani, Roozbeh Razavi-Far, Mehrdad Saif, Gérard-André Capolino

IEEE Syst. J., 2021

2019

Information Fusion and Semi-Supervised Deep Learning Scheme for Diagnosing Gear Faults in Induction Machine Systems.

Roozbeh Razavi-Far, Ehsan Hallaji, Maryam Farajzadeh-Zanjani, Mehrdad Saif, Shahin Hedayati Kia, Humberto Henao, Gérard-André Capolino

IEEE Trans. Ind. Electron., 2019

Stray Flux Monitoring for Reliable Detection of Rotor Faults Under the Influence of Rotor Axial Air Ducts.

Yonghyun Park, Chanseung Yang, Jongwan Kim, Heonyoung Kim, Sang Bin Lee, Konstantinos Gyftakis, Panagiotis A. Panagiotou, Shahin Hedayati Kia, Gérard-André Capolino

IEEE Trans. Ind. Electron., 2019

A New Model for Six-Phase Induction Generator.

Tri Nurwati, Sébastien Carriere, Franck Betin, Gérard-André Capolino

Proceedings of the IECON 2019, 2019

2018

Fuzzy Logic Control of a Low Speed Six-Phase Induction Generator for Wind Turbines.

Alin Pantea, Tri Nurwati, Amine Yazidi, Franck Betin, Sébastien Carriere, Gérard-André Capolino

Proceedings of the IECON 2018, 2018

Contribution to wind turbine emulation based on wound rotor induction machine configuration.

Shahin Hedayati Kia, Humberto Henao, Gérard-André Capolino, Mohammad Hoseintabar Marzebali

Proceedings of the IEEE International Conference on Industrial Technology, 2018

2017

A Diagnostic Space Vector-Based Index for Rotor Electrical Fault Detection in Wound-Rotor Induction Machines Under Speed Transient.

Yasser Gritli, Claudio Rossi, Domenico Casadei, Fiorenzo Filippetti, Gérard-André Capolino

IEEE Trans. Ind. Electron., 2017

2016

Six-Phase Induction Machine Model for Electrical Fault Simulation Using the Circuit-Oriented Method.

Alin Pantea, Amine Yazidi, Franck Betin, Mehdi Taherzadeh, Sébastien Carriere, Humberto Henao, Gérard-André Capolino

IEEE Trans. Ind. Electron., 2016

Six-phase Axial Flux Permanent Magnet generator model: Simulation and experimental validation.

Alin Pantea, Amine Yazidi, Franck Betin, Gérard-André Capolino, V. Lanfranchi

Proceedings of the 25th IEEE International Symposium on Industrial Electronics, 2016

Robust control of a six-phase induction generator under open-phase fault conditions.

Sébastien Carriere, Franck Betin, Gérard-André Capolino, Mehdi Taherzadeh, Mahmood Joorabian, Reza Kianinezhad

Proceedings of the 25th IEEE International Symposium on Industrial Electronics, 2016

Efficient Field Oriented Control with power losses optimisation of a six-phase induction generator for wind turbines.

Alin Pantea, Arnaud Sivert, Amine Yazidi, Franck Betin, Sébastien Carriere, Gérard-André Capolino

Proceedings of the IECON 2016, 2016

Gear fault diagnosis using discrete wavelet transform and deep neural networks.

Mehrdad Heydarzadeh, Shahin Hedayati Kia, Mehrdad Nourani, Humberto Henao, Gérard-André Capolino

Proceedings of the IECON 2016, 2016

2015

Advances in Electrical Machine, Power Electronic, and Drive Condition Monitoring and Fault Detection: State of the Art.

Martin Riera-Guasp, Jose A. Antonino-Daviu, Gérard-André Capolino

IEEE Trans. Ind. Electron., 2015

Gear Tooth Surface Damage Fault Detection Using Induction Machine Stator Current Space Vector Analysis.

Shahin Hedayati Kia, Humberto Henao, Gérard-André Capolino

IEEE Trans. Ind. Electron., 2015

Modern Diagnostics Techniques for Electrical Machines, Power Electronics, and Drives.

Gérard-André Capolino, Jose A. Antonino-Daviu, Martin Riera-Guasp

IEEE Trans. Ind. Electron., 2015

On-line observer modification of a six-phase induction generator in faulted mode.

Mehdi Taherzadeh, Sébastien Carriere, Mahmood Joorabian, Franck Betin, Reza Kianinezhad, Gérard-André Capolino

Proceedings of the IECON 2015, 2015

2014

New Trends in Electrical Machines Technology - Part II.

Gérard-André Capolino, Andrea Cavagnino

IEEE Trans. Ind. Electron., 2014

New Trends in Electrical Machines Technology - Part I.

Gérard-André Capolino, Andrea Cavagnino

IEEE Trans. Ind. Electron., 2014

Diagnosis of stator high-resistance connections in Wound Rotor Induction Machines for WECS.

Yasser Gritli, Claudio Rossi, Luca Zarri, Michele Mengoni, Fiorenzo Filippetti, Domenico Casadei, Gérard-André Capolino

Proceedings of the 23rd IEEE International Symposium on Industrial Electronics, 2014

Six-phase induction machine model for simulation and control purposes.

Amine Yazidi, Alin Pantea, Franck Betin, Sébastien Carriere, Humberto Henao, Gérard-André Capolino

Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014

Analysis and control of six-phase induction machines in unbalanced operating situation due to phase opening.

Mehdi Taherzadeh, Sébastien Carriere, Mahmood Joorabian, Franck Betin, Reza Kianinezhad, Gérard-André Capolino

Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014

Development of a test bench dedicated to condition monitoring of wind turbines.

Shahin Hedayati Kia, Humberto Henao, Gérard-André Capolino

Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014

2013

Wound-Rotor Induction Generator Inter-Turn Short-Circuits Diagnosis Using a New Digital Neural Network.

Samuel Toma, Laurent Capocchi, Gérard-André Capolino

IEEE Trans. Ind. Electron., 2013

Advanced Diagnosis of Electrical Faults in Wound-Rotor Induction Machines.

Yasser Gritli, Luca Zarri, Claudio Rossi, Fiorenzo Filippetti, Gérard-André Capolino, Domenico Casadei

IEEE Trans. Ind. Electron., 2013

Introduction to the Special Section on Advances in Diagnosis for Electrical Machines, Power Electronics, and Drives - Part II.

Gérard-André Capolino, Fiorenzo Filippetti

IEEE Trans. Ind. Electron., 2013

Introduction to the special section on advances in diagnosis for electrical machines, power electronics, and drives - Part I.

Gérard-André Capolino, Fiorenzo Filippetti

IEEE Trans. Ind. Electron., 2013

Gear tooth surface damage fault profile identification using stator current space vector instantaneous frequency.

Shahin Hedayati Kia, Humberto Henao, Gérard-André Capolino

Proceedings of the IECON 2013, 2013

2012

Guest Editorial.

Gérard-André Capolino, Aldo Boglietti

IEEE Trans. Ind. Electron., 2012

Shaft Positioning for Six-Phase Induction Machines With Open Phases Using Variable Structure Control.

Franck Betin, Gérard-André Capolino

IEEE Trans. Ind. Electron., 2012

Modeling and simulation of planetary gearbox effects on a wound rotor induction machine.

Zahra Daneshi-Far, Gérard-André Capolino, Humberto Henao

Proceedings of the 21st IEEE International Symposium on Industrial Electronics, 2012

Stator current bi-spectrum patterns for induction machines multiple-faults detection.

Lotfi Saidi, Farhat Fnaiech, Gérard-André Capolino, Humberto Henao

Proceedings of the 38th Annual Conference on IEEE Industrial Electronics Society, 2012

2011

A Web-Based Remote Laboratory for Monitoring and Diagnosis of AC Electrical Machines.

Amine Yazidi, Humberto Henao, Gérard-André Capolino, Franck Betin, Fiorenzo Filippetti

IEEE Trans. Ind. Electron., 2011

Torsional-Vibration Assessment and Gear-Fault Diagnosis in Railway Traction System.

Humberto Henao, Shahin Hedayati Kia, Gérard-André Capolino

IEEE Trans. Ind. Electron., 2011

Wire Rope Fault Detection in a Hoisting Winch System by Motor Torque and Current Signature Analysis.

Humberto Henao, Seyed Mohammad Javad Rastegar Fatemi, Gérard-André Capolino, Sophie Sieg-Zieba

IEEE Trans. Ind. Electron., 2011

2010

Torsional Vibration Assessment Using Induction Machine Electromagnetic Torque Estimation.

Shahin Hedayati Kia, Humberto Henao, Gérard-André Capolino

IEEE Trans. Ind. Electron., 2010

Fuzzy Logic and Sliding-Mode Controls Applied to Six-Phase Induction Machine With Open Phases.

Mohamed Amine Fnaiech, Franck Betin, Gérard-André Capolino, Farhat Fnaiech

IEEE Trans. Ind. Electron., 2010

2009

Torsional Vibration Effects on Induction Machine Current and Torque Signatures in Gearbox-Based Electromechanical System.

Shahin Hedayati Kia, Humberto Henao, Gérard-André Capolino

IEEE Trans. Ind. Electron., 2009

2008

Modeling and Control of Six-Phase Symmetrical Induction Machine Under Fault Condition Due to Open Phases.

Reza Kianinezhad, Babak Nahid-Mobarakeh, Lotfi Baghli, Franck Betin, Gérard-André Capolino

IEEE Trans. Ind. Electron., 2008

High Frequency Resolution Techniques for Rotor Fault Detection of Induction Machines.

Alberto Bellini, Amine Yazidi, Fiorenzo Filippetti, Claudio Rossi, Gérard-André Capolino

IEEE Trans. Ind. Electron., 2008

Advances in Diagnostic Techniques for Induction Machines.

Alberto Bellini, Fiorenzo Filippetti, Carla Tassoni, Gérard-André Capolino

IEEE Trans. Ind. Electron., 2008

A Modeling Approach for Gearbox Monitoring Using Stator Current Signature in Induction Machines.

Shahin Hedayati Kia, Humberto Henao, Gérard-André Capolino

Proceedings of the Industry Applications Society Annual Meeting, 2008

2007

A High-Resolution Frequency Estimation Method for Three-Phase Induction Machine Fault Detection.

Shahin Hedayati Kia, Humberto Henao, Gérard-André Capolino

IEEE Trans. Ind. Electron., 2007

Sensorless Control of Induction Motors by Reduced Order Observer With MCA EXIN + Based Adaptive Speed Estimation.

Maurizio Cirrincione, Marcello Pucci, Giansalvo Cirrincione, Gérard-André Capolino

IEEE Trans. Ind. Electron., 2007

Sensorless Control of Induction Machines by a New Neural Algorithm: The TLS EXIN Neuron.

Maurizio Cirrincione, Marcello Pucci, Giansalvo Cirrincione, Gérard-André Capolino

IEEE Trans. Ind. Electron., 2007

Determination of Scaling Factors for Fuzzy Logic Control Using the Sliding-Mode Approach: Application to Control of a DC Machine Drive.

Franck Betin, Arnaud Sivert, Amine Yazidi, Gérard-André Capolino

IEEE Trans. Ind. Electron., 2007

Diagnosis of Broken Bar Fault in Induction Machines Using Discrete Wavelet Transform without Slip Estimation.

Shahin Hedayati Kia, Humberto Henao, Gérard-André Capolino

Proceedings of the Conference Record of the 2007 IEEE Industry Applications Conference Forty-Second IAS Annual Meeting, 2007

2005

Constrained minimization for parameter estimation of induction motors in saturated and unsaturated conditions.

Maurizio Cirrincione, Marcello Pucci, Giansalvo Cirrincione, Gérard-André Capolino

IEEE Trans. Ind. Electron., 2005

2004

Variable structure control of a piezoelectric actuator for a scanning tunneling microscope.

Nicolas Bonnail, Didier Tonneau, Franck Jandard, Gérard-André Capolino, Hervé Dallaporta

IEEE Trans. Ind. Electron., 2004

2002

A time-varying sliding surface for robust position control of a DC motor drive.

Franck Betin, Daniel Pinchon, Gérard-André Capolino

IEEE Trans. Ind. Electron., 2002

2000

Fuzzy logic applied to speed control of a stepping motor drive.

Franck Betin, Daniel Pinchon, Gérard-André Capolino

IEEE Trans. Ind. Electron., 2000