Gabriele Patrizi

Cristian Garzón Alfonso

Leandro Calandroni

Alessandro Bartolini

Libero Paolucci

Francesco Grasso

Sensors, September, 2024

A Review of Degradation Models and Remaining Useful Life Prediction for Testing Design and Predictive Maintenance of Lithium-Ion Batteries.

[BibT_eX]

[DOI]

Sensors, June, 2024

Temperature Sensitivity Analysis of Inertial Measurement Unit Under Dynamic Conditions.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2024

Considerations on the Electrode-Spacing-to-Electrode-Diameter Ratio in Electrical Resistivity Tomography (ERT): An Operational Approach.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2024

Experimental Characterization of Hybrid Supercapacitor Under Different Operating Conditions Using EIS Measurements.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2024

Equivalent Circuit Modelling of Hybrid Supercapacitors Through Experimental Spectroscopic Measurements.

[BibT_eX]

[DOI]

Gabriele Maria Lozito

IEEE Access, 2024

Life Cycle Analysis of Lithium Batteries for Smart Grids using Electrochemical Impedance Spectroscopy Data.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024

Lithium-ion battery dataset for data driven models' development.

[BibT_eX]

[DOI]

Maurizio Spadavecchia

Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024

Introduction to clustering unsupervised machine learning algorithms applied to power quality disturbances.

[BibT_eX]

[DOI]

Marcantonio Catelani

Cristian Garzón Alfonso

Francesco Grasso

Libero Paolucci

Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024

Power Quality Meter based on Low-Cost Smart Platform.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024

Characterization of $\text{LiFePO}_{4}$ Cells for Formula SAE's Driverless Vehicle Using Climate Tests.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Workshop on Metrology for Automotive, 2024

Impedance Analysis of Hybrid Supercapacitor using EIS under Temperature and SOC Variable Conditions.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

Prediction of Li-Ion Battery State-of-Health Based on Data-Driven Approach.

[BibT_eX]

[DOI]

Maurizio Spadavecchia

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

Dynamic Temperature Test of Gyroscope for Automotive Applications.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

State of Health Prediction of Batteries for Smart Energy Grids Based on Multiple Features.

[BibT_eX]

[DOI]

Marcantonio Catelani

Cristian Garzón Alfonso

Francesco Grasso

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

Remaining Useful Life estimation for MEMS-based transducers.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

2023

IMS Awards: An Innovative Data-Driven Reliability Life Cycle for Complex Systems.

[BibT_eX]

[DOI]

IEEE Instrum. Meas. Mag., November, 2023

Analysis of Inertial Measurement Units Performances Under Dynamic Conditions.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2023

A Novel Methodology for Unsupervised Anomaly Detection in Industrial Electrical Systems.

[BibT_eX]

[DOI]

Marco Carratù

Vincenzo Gallo

Salvatore Dello Iacono

IEEE Trans. Instrum. Meas., 2023

Fuzzy-Based Approach to Solve Classical Risk Priority Number Drawbacks for Railway Signaling Systems.

[BibT_eX]

[DOI]

Giulia Guidi

IEEE Intell. Transp. Syst. Mag., 2023

Experimental Design and Maintenance, Towards a Decision-Making Approach Driven by Degradation Models, with Application to Lithium-Ion Batteries.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Conference on Metrology for eXtended Reality, 2023

A Multi-Channel Deep-Learning Prediction Algorithm for Battery State-of-Health Indicator.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Conference on Metrology for eXtended Reality, 2023

Temperature Sensitivity Analysis of a Power Quality Meter Using Thermal Step Test.

[BibT_eX]

[DOI]

Proceedings of the 2023 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2023

Exponential degradation model for Remaining Useful Life estimation of electrolytic capacitors.

[BibT_eX]

[DOI]

Marcantonio Catelani

Proceedings of the IEEE International Workshop on Metrology for Automotive, 2023

Improving Power Quality measurements using deep learning for disturbance classification.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

An experimental setup for characterization of Inertial measurement unit under dynamic conditions.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

Anomaly Detection on Industrial Electrical Systems using Deep Learning.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

Experimental analysis for the estimation of the Arrhenius's activation energy of lithium batteries.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

2022

Electrical Characterization Under Harsh Environment of DC-DC Converters Used in Diagnostic Systems.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2022

A Virtual Soil Moisture Sensor for Smart Farming Using Deep Learning.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2022

An Innovative Single Shot Power Quality Disturbance Detector Algorithm.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2022

Stress Testing for Performance Analysis of Orientation Estimation Algorithms.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2022

Reliability Prediction of an innovative Power Quality Meter.

[BibT_eX]

[DOI]

Alessandro Bartolini

Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2022

Remaining Useful Life estimation for electric vehicle batteries using a similarity-based approach.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Workshop on Metrology for Automotive, 2022

Validation of RUL estimation method for battery prognostic under different fast-charging conditions.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

Analysis of non-ideal remote pole in Electrical Resistivity Tomography for subsurface surveys.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

Temperature stress tests on low-cost IMU systems: Analysis and first proposal for enhancing performance.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

2021

Comparing the Effects of GPS Error on Different Electrical Resistivity Tomography Arrays for Archeological Investigations.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2021

Remaining Useful Life Estimation for Prognostics of Lithium-Ion Batteries Based on Recurrent Neural Network.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2021

Experimental Analysis of Filtering Algorithms for IMU-Based Applications Under Vibrations.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2021

Ultra-Wideband Radar-Based Indoor Activity Monitoring for Elderly Care.

[BibT_eX]

[DOI]

Sensors, 2021

Reliability Analysis of Wireless Sensor Network for Smart Farming Applications.

[BibT_eX]

[DOI]

Sensors, 2021

An enhanced SHERPA (E-SHERPA) method for human reliability analysis in railway engineering.

[BibT_eX]

[DOI]

Reliab. Eng. Syst. Saf., 2021

Improving Human Reliability Analysis for Railway Systems Using Fuzzy Logic.

[BibT_eX]

[DOI]

IEEE Access, 2021

FMECA Assessment for Railway Safety-Critical Systems Investigating a New Risk Threshold Method.

[BibT_eX]

[DOI]

IEEE Access, 2021

Reliability Analysis of diagnostic system for Condition Monitoring of industrial plant.

[BibT_eX]

[DOI]

Proceedings of the 6th IEEE International Forum on Research and Technology for Society and Industry, 2021

Accelerated Testing and Reliability estimation of electronic boards for automotive applications.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Workshop on Metrology for Automotive, 2021

Reliability Allocation: an iterative approach for complex systems.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Symposium on Systems Engineering, 2021

Reliability and Functional Analysis of IMU systems under temperature-based stress tests.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

Effects of inaccurate electrode positioning in subsurface resistivity measurements for archeological purposes.

[BibT_eX]

[DOI]

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

2020

Influence of Raised Ambient Temperature on a Sensor Node Using Step-Stress Test.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2020

Optimizing Maintenance Policies for a Yaw System Using Reliability-Centered Maintenance and Data-Driven Condition Monitoring.

[BibT_eX]

[DOI]

IEEE Trans. Instrum. Meas., 2020

Analysis of the Influence of the GPS Errors Occurred While Collecting Electrode Coordinates on the Electrical Resistivity of Tumuli.

[BibT_eX]

[DOI]

Sensors, 2020

Risk Assessment of a Wind Turbine: A New FMECA-Based Tool With RPN Threshold Estimation.

[BibT_eX]

[DOI]

IEEE Access, 2020

Characterization of a low-cost and low-power environmental monitoring system.

[BibT_eX]

[DOI]

Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

Characterization of Inertial Measurement Units under Environmental Stress Screening.

[BibT_eX]

[DOI]

Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

2019

A Critical Comparison of Alternative Risk Priority Numbers in Failure Modes, Effects, and Criticality Analysis.

[BibT_eX]

[DOI]

Giulia Guidi

IEEE Access, 2019

Condition-based Maintenance for Oil&Gas system basing on Failure Modes and Effects Analysis.

[BibT_eX]

[DOI]

Giulia Guidi

Proceedings of the 5th IEEE International forum on Research and Technology for Society and Industry, 2019

Standby Redundancy for Reliability Improvement of Wireless Sensor Network.

[BibT_eX]

[DOI]

Proceedings of the 5th IEEE International forum on Research and Technology for Society and Industry, 2019

Reliability improvement of wind turbine control system based on standby redundancy.

[BibT_eX]

[DOI]

Proceedings of the International Symposium on Systems Engineering, 2019

Improving context awareness reliability estimation for a wind turbine using an RBD model.

[BibT_eX]

[DOI]

Diego Galar