Eiichi Aoyama

According to our database, Eiichi Aoyama authored at least 26 papers between 2009 and 2024.

Collaborative distances:

• Dijkstra number of five.
• Erdős number of five.

2024

Influence of Pilot Hole and Work Material Hardness on Thread Milling with a Wireless Holder System.

Shota Matsui, Nobutoshi Ozaki, Toshiki Hirogaki, Eiichi Aoyama, Ryo Matsuda

Int. J. Autom. Technol., July, 2024

Improving Machined Accuracy Under a Constant Feed Speed Vector at the End-Milling Point by Estimating Machining Force in Tool Approach.

Takamaru Suzuki, Toshiki Hirogaki, Eiichi Aoyama

Int. J. Autom. Technol., May, 2024

Study on Temporary Unloading for Chatter Vibration Suppression Using Fixed Superabrasive Polishing Stone with Five-Joint Closed-Link Small Robot and Voice Coil Motor Thrust Control.

Yuki Manabe, Taichi Yamamoto, Taichi Ueda, Toshiki Hirogaki, Eiichi Aoyama

Int. J. Autom. Technol., March, 2024

Investigation of Drilling Holes in CFRP for Aircraft Using cBN Electroplated Ball End Mill Using Helical Interpolation Motion.

Sora Hamamoto, Toshiki Hirogaki, Eiichi Aoyama, Kazuna Fujiwara, Masashi Taketani

Int. J. Autom. Technol., March, 2024

2023

Advanced Musical Saw Manipulation by an Industrial Cooperative Humanoid Robot with Passive Sound Feedback.

Hiroaki Hanai, Atsuyuki Miura, Toshiki Hirogaki, Eiichi Aoyama

J. Robotics Mechatronics, June, 2023

2022

Investigation of Air Filter Properties of Flash-Spinning Nanofiber Non-Woven Fabric.

Shih-Pang Tsai, Wei Wu, Hiroyoshi Sota, Toshiki Hirogaki, Eiichi Aoyama

Int. J. Autom. Technol., 2022

Improved Synchronous Motion of Linear and Rotary Axes While Avoiding Torque Saturation Under a Constant Feed Speed Vector at the Endmilling Point - Investigation of Motion Error Under Numerical Control Commanded Motion -.

Takamaru Suzuki, Kazuki Yoshikawa, Toshiki Hirogaki, Eiichi Aoyama, Takakazu Ikegami

Int. J. Autom. Technol., 2022

2021

Investigation of Optimum Grinding Condition Using cBN Electroplated End-Mill for CFRP Machining.

Shinnosuke Yamashita, Tatsuya Furuki, Hiroyuki Kousaka, Toshiki Hirogaki, Eiichi Aoyama, Kiyofumi Inaba, Kazuna Fujiwara

Int. J. Autom. Technol., 2021

Monitoring of Vibrations in Free-Form Surface Processing Using Ball Nose End Mill Tools with Wireless Tool Holder Systems.

Takamasa Yamamoto, Ryo Matsuda, Masatoshi Shindou, Toshiki Hirogaki, Eiichi Aoyama

Int. J. Autom. Technol., 2021

Development of a Forward-Reverse Rotating cBN Electroplated End Mill Type Tool for Cutting and Grinding CFRP.

Fumiya Muto, Toshiki Hirogaki, Eiichi Aoyama, Tatsuya Furuki, Kiyofumi Inaba, Kazuna Fujiwara

Int. J. Autom. Technol., 2021

Positioning Error Calibration of Industrial Robots Based on Random Forest.

Daiki Kato, Kenya Yoshitsugu, Naoki Maeda, Toshiki Hirogaki, Eiichi Aoyama, Kenichi Takahashi

Int. J. Autom. Technol., 2021

Predicting Positioning Error and Finding Features for Large Industrial Robots Based on Deep Learning.

Daiki Kato, Kenya Yoshitsugu, Toshiki Hirogaki, Eiichi Aoyama, Kenichi Takahashi

Int. J. Autom. Technol., 2021

Reversing Behavior of Planetary Gear Train Influenced by Support Stiffness of Driving Shaft.

Seiya Hamada, Kazutoshi Otokodani, Masao Nakagawa, Toshiki Hirogaki, Eiichi Aoyama

Int. J. Autom. Technol., 2021

2020

Investigation of Production of Nanofiber Nonwoven Fabric and its Thermal Properties.

Wei Wu, Kenichi Urabe, Toshiki Hirogaki, Eiichi Aoyama, Hiroyoshi Sota

Int. J. Autom. Technol., 2020

Investigation of Internal Thread Cutting Phenomena in Three Axes by Controlling Helical Interpolate Motion Considering Tool Position Information from Servo-Drive.

Shota Matsui, Nobutoshi Ozaki, Toshiki Hirogaki, Eiichi Aoyama, Takamasa Yamamoto

Int. J. Autom. Technol., 2020

Influence of Grooved Plate Cross-Sectional Shape on Bending Phenomena in Laser-Quenching Forming Process.

Yuki Manabe, Hiromichi Nishida, Toshiki Hirogaki, Eiichi Aoyama

Int. J. Autom. Technol., 2020

Driving Performance of Natural Fiber Gears Made Only from Bamboo Fibers Extracted with a Machining Center.

Tetsuya Kawabata, Toshiki Hirogaki, Eiichi Aoyama, Hiromichi Nobe

Int. J. Autom. Technol., 2020

2019

Improved Method for Synchronizing Motion Accuracy of Linear and Rotary Axes Under Constant Feed Speed Vector at End Milling Point - Investigation of Motion Error Under NC-Commanded Motion -.

Takamaru Suzuki, Kazuki Yoshikawa, Toshiki Hirogaki, Eiichi Aoyama, Takakazu Ikegami

Int. J. Autom. Technol., 2019

Mirror-Surface Finishing by Integrating Magnetic-Polishing Technology with a Compact Machine Tool.

Yuki Manabe, Hiroki Murakami, Toshiki Hirogaki, Eiichi Aoyama, Tatsuya Furuki

Int. J. Autom. Technol., 2019

2018

Monitoring of Rotational Vibration in Tap and Endmill Processes with a Wireless Multifunctional Tool Holder System.

Ryo Matsuda, Masatoshi Shindou, Toshiki Hirogaki, Eiichi Aoyama

Int. J. Autom. Technol., 2018

2016

Whole Quenching of Small Thin Plate with Low-Power Semiconductor Laser Based on Feed-Speed Combination Problem.

Yuki Manabe, Ryosuke Oda, Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa

Int. J. Autom. Technol., 2016

Investigation of impact task performed by humanoid robot using input shaping control method.

Asuka Kobayashi, Hironori Suzuki, Toshiki Hirogaki, Eiichi Aoyama

Proceedings of the 14th International Conference on Control, 2016

2015

Detection of Motion Error Under Synchronous Two-Axis Control of a Dual Arm Robot Based on Monitoring of Ball Rolling Motion on a Plate.

Wei Wu, Shun Kinoshita, Toshiki Hirogaki, Eiichi Aoyama

Int. J. Autom. Technol., 2015

2012

Motion Control of Rolling Ball by Operating the Working Plate with a Dual-Arm Robot.

Wei Wu, Toshiki Hirogaki, Eiichi Aoyama

Int. J. Autom. Technol., 2012

Investigation of End-Milling Condition Decision Methodology Based on Data Mining for Tool Catalog Database.

Hiroyuki Kodama, Toshiki Hirogaki, Eiichi Aoyama, Keiji Ogawa

Int. J. Autom. Technol., 2012

2009

Nano-Mirror Surface Generation for Hardened Steel Using Ultra-Low Pressure Super-Finishing.

Sachiko Ogawa, Eiichi Aoyama, Toshiki Hirogaki, Yoshiaki Onchi, Kentarou Oku

Int. J. Autom. Technol., 2009