Edoardo Cantù
Orcid: 0000-0001-8065-0166Affiliations:
- University of Brescia, Italy
According to our database1,
Edoardo Cantù
authored at least 16 papers
between 2018 and 2024.
Collaborative distances:
Collaborative distances:
Timeline
2018
2019
2020
2021
2022
2023
2024
0
1
2
3
4
5
6
2
1
1
1
2
5
1
1
2
Legend:
Book In proceedings Article PhD thesis Dataset OtherLinks
Online presence:
-
on orcid.org
On csauthors.net:
Bibliography
2024
Asymmetric Self Heating of Fully Printed Strain Gauge in Wheatstone Bridge Configuration.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024
Overall Additive Manufacturing of Capacitive Sensors Integrated into Textiles: A Preliminary Analysis on Contact Pressure Estimation.
Proceedings of the 17th International Joint Conference on Biomedical Engineering Systems and Technologies, 2024
2022
Aerosol Jet Printed and Photonic Cured Paper-Based Ammonia Sensor for Food Smart Packaging.
IEEE Trans. Instrum. Meas., 2022
IEEE Trans. Instrum. Meas., 2022
2021
Proceedings of the 6th IEEE International Forum on Research and Technology for Society and Industry, 2021
Preliminary Analysis on a Paper-based Ammonia Sensor for Future Food Smart Packaging.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2021
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2021
Preliminary Study of a Flexible Printed Multi-Sensing Platform for Electromyography and Lactate Measuring during Rehabilitation.
Proceedings of the IEEE International Symposium on Medical Measurements and Applications, 2021
PVDF Piezoelectric Sensors on 3D low-Melting Point Substrates: a Preliminary Study on Paper.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021
2020
Printed Smart Devices on Cellulose-Based Materials by means of Aerosol-Jet Printing and Photonic Curing.
Sensors, 2020
Preliminary Analysis on Cellulose-based Gas Sensor by Means of Aerosol Jet Printing and Photonic Sintering.
Proceedings of the 13th International Joint Conference on Biomedical Engineering Systems and Technologies (BIOSTEC 2020), 2020
2019
Support-Material-Free Microfluidics on an Electrochemical Sensors Platform by Aerosol Jet Printing.
Sensors, 2019
Preliminary Study on a Strain Sensor Printed on 3D-plastic Surfaces for Smart Devices.
Proceedings of the 2nd Workshop on Metrology for Industry 4.0 and IoT MetroInd4.0&IoT 2019, 2019
2018
Proceedings of the Sensors, 2018
Design and implementation of a microsensor platform for protein detection realized via 3-D printing.
Proceedings of the 2018 IEEE Sensors Applications Symposium, 2018