Eckart Uhlmann

According to our database, Eckart Uhlmann authored at least 30 papers between 2007 and 2024.

Collaborative distances:

• Dijkstra number of five.
• Erdős number of four.

2024

Increasing the Absolute Position Accuracy of Industrial Robots by Means of a Deep Continual Evidential Regression Model.

Eckart Uhlmann, Mitchel Polte, Julian Blumberg, Sheng Yin, Gang Wang

Proceedings of the IEEE International Conference on Robotics and Automation, 2024

2022

Application of Uncertainty-Aware Sensor Fusion in Physical Sensor Networks.

Maximilian Gruber, Wenzel Pilar von Pilchau, Varun Gowtham, Nikolaos-Stefanos Koutrakis, Nicolas Schönborn, Sascha Eichstädt, Jörg Hähner, Marius Iulian Corici, Thomas Magedanz, Julian Polte, Eckart Uhlmann

Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

2021

Deformation error compensation of industrial robots in single point incremental forming by means of data-driven stiffness model.

Julian Blumberg, Zhou-Long Li, Lemopi Isodore Besong, Mitchel Polte, Johannes Buhl, Eckart Uhlmann, Markus Bambach

Proceedings of the 26th International Conference on Automation and Computing, 2021

2020

Optimization with the evolution strategy by example of electrical-discharge drilling.

Jan Streckenbach, Ivan Santibáñez-Koref, Ingo Rechenberg, Eckart Uhlmann

Neurocomputing, 2020

An Architectural Design for Measurement Uncertainty Evaluation in Cyber-Physical Systems.

Wenzel Pilar von Pilchau, Varun Gowtham, Maximilian Gruber, Matthias Riedl, Nikolaos-Stefanos Koutrakis, Jawad Tayyub, Jörg Hähner, Sascha Eichstädt, Eckart Uhlmann, Julian Polte, Volker Frey, Alexander Willner

Proceedings of the Position Papers of the 2020 Federated Conference on Computer Science and Information Systems, 2020

2018

Dynamic Analysis of Abrasive Filaments in Contact with Different Workpiece Geometries.

Eckart Uhlmann, Christian Sommerfeld

Int. J. Autom. Technol., 2018

Modelling of Material Removal in Abrasive Flow Machining.

Eckart Uhlmann, Simon Roßkamp

Int. J. Autom. Technol., 2018

A Process Model for Enhancing Digital Assistance in Knowledge-Based Maintenance.

Klaudia Kovacs, Fazel Ansari, Claudio Geisert, Eckart Uhlmann, Robert Glawar, Wilfried Sihn

Proceedings of the Machine Learning for Cyber Physical Systems, 2018

2015

Analysis of residual stresses and wear mechanism of HF-CVD diamond coated cemented carbide tools.

Eckart Uhlmann, Fiona Sammler, M. Meixner, D. Heinrich, F. Gansert, Walter Reimers, Daniel Berger, I. Rieck

Prod. Eng., 2015

Evaluation of different approaches for modeling phase transformations in machining simulation.

Volker Schulze, Eckart Uhlmann, Rolf Mahnken, Andreas Menzel, Dirk Biermann, Andreas Zabel, Patrick Bollig, Ivan M. Ivanov, Chun Cheng, Raphael Holtermann, Thorsten Bartel

Prod. Eng., 2015

2014

Study of inkjet printing as additive manufacturing process for gradient polyurethane material.

Marco Müller, Quang-Ut Huynh, Eckart Uhlmann, Manfred H. Wagner

Prod. Eng., 2014

2013

An extended shear angle model derived from in situ strain measurements during orthogonal cutting.

Eckart Uhlmann, S. Henze, Robert Gerstenberger, Katrin Brömmelhoff, Walter Reimers, Torben Fischer, N. Schell

Prod. Eng., 2013

Tool optimization for high speed grinding.

Eckart Uhlmann, L. Hochschild

Prod. Eng., 2013

Surface structuring using kinematic modulation in grinding.

Eckart Uhlmann, C. Bäcker, N. Schröer

Prod. Eng., 2013

2012

Thermal modelling of an HSC machining centre to predict thermal error of the feed system.

Eckart Uhlmann, Jiangmin Hu

Prod. Eng., 2012

Wear reduction at double face grinding with planetary kinematics.

Eckart Uhlmann, T. Hoghé

Prod. Eng., 2012

2011

Simulation approaches for pulse magnetic forming.

Eckart Uhlmann, Alexander Ziefle

Prod. Eng., 2011

Influences on specific cutting forces and their impact on the stability behaviour of milling processes.

Eckart Uhlmann, Patrick Rasper

Prod. Eng., 2011

Grain mill test for sintered microcrystalline aluminum oxide abrasive grains.

Eckart Uhlmann, Gregor Hasper

Prod. Eng., 2011

In situ strain measurement in the chip formation zone during orthogonal cutting.

Eckart Uhlmann, Robert Gerstenberger, Stefan Herter, T. Hoghé, Walter Reimers, Bettina Camin, R. V. Martins, Andreas Schreyer, Torben Fischer

Prod. Eng., 2011

Austenitic stainless steel for separating safeguards: development of an FEA-model for the simulation of impact tests in reference to material specific parameters.

Eckart Uhlmann, Bernd Duchstein

Prod. Eng., 2011

2010

Influence of coolant conditions in ultrasonic assisted grinding of high performance ceramics.

Eckart Uhlmann, C. Sammler

Prod. Eng., 2010

Analysis of tool wear and residual stress of CVD diamond coated cemented carbide tools in the machining of aluminium silicon alloys.

Eckart Uhlmann, Walter Reimers, F. Byrne, M. Klaus

Prod. Eng., 2010

Analysis of the manufacturing chain of CVD diamond coated shaft type cutting tools.

Eckart Uhlmann, Jens König

Prod. Eng., 2010

2009

Substrate pre-treatment of cemented carbides using abrasive flow machining and laser beam ablation.

Eckart Uhlmann, S. Richarz, V. Mihotovic

Prod. Eng., 2009

Quasi-static chip formation of intermetallic titanium aluminides.

Eckart Uhlmann, Stefan Herter, Robert Gerstenberger, Martin Roeder

Prod. Eng., 2009

2008

Machining of micro rotational parts by wire electrical discharge grinding.

Eckart Uhlmann, Sascha Piltz, Dirk Oberschmidt

Prod. Eng., 2008

Pre-treatment by dry ice blasting for adhesive bonding.

Eckart Uhlmann, A. El Mernissi

Prod. Eng., 2008

Development of a technology orientated programming system for industrial robots.

Eckart Uhlmann, Thomas Friedrich, Nayim Bayat

Prod. Eng., 2008

2007

Economical aspects of profiling diamond-grinding wheels.

Eckart Uhlmann, Frank Sroka, Christoph Hubert

Int. J. Manuf. Technol. Manag., 2007