Duc Truong Pham
Orcid: 0000-0003-3148-2404
According to our database1,
Duc Truong Pham
authored at least 102 papers
between 1988 and 2024.
Collaborative distances:
Collaborative distances:
Timeline
Legend:
Book In proceedings Article PhD thesis Dataset OtherLinks
On csauthors.net:
Bibliography
2024
J. Intell. Manuf., June, 2024
Learning by doing: A dual-loop implementation architecture of deep active learning and human-machine collaboration for smart robot vision.
Robotics Comput. Integr. Manuf., April, 2024
Predictive exposure control for vision-based robotic disassembly using deep learning and predictive learning.
Robotics Comput. Integr. Manuf., February, 2024
End-of-life electric vehicle battery disassembly enabled by intelligent and human-robot collaboration technologies: A review.
Robotics Comput. Integr. Manuf., 2024
Human-Robot Collaboration in Mixed-Flow Assembly Line Balancing under Uncertainty: An Efficient Discrete Bees Algorithm.
J. Ind. Inf. Integr., 2024
Selective disassembly sequence planning under uncertainty using trapezoidal fuzzy numbers: A novel hybrid metaheuristic algorithm.
Eng. Appl. Artif. Intell., 2024
Learning from demonstration for autonomous generation of robotic trajectory: Status quo and forward-looking overview.
Adv. Eng. Informatics, 2024
Human-robot collaborative disassembly enabled by brainwaves and improved generative adversarial network.
Adv. Eng. Informatics, 2024
Disassembly sequence planning of equipment decommissioning for industry 5.0: Prospects and Retrospects.
Adv. Eng. Informatics, 2024
The Emerging Intelligent Vehicles and Intelligent Vehicle Carriers Collaborative Systems.
Proceedings of the IEEE Intelligent Vehicles Symposium, 2024
2023
IEEE Trans. Ind. Informatics, November, 2023
A new heuristic algorithm based on multi-criteria resilience assessment of human-robot collaboration disassembly for supporting spent lithium-ion battery recycling.
Eng. Appl. Artif. Intell., November, 2023
A multiobjective decision-making approach for modelling and planning economically and environmentally sustainable robotic disassembly for remanufacturing.
Comput. Ind. Eng., October, 2023
Energy-time tradeoffs for remanufacturing system scheduling using an invasive weed optimization algorithm.
J. Intell. Manuf., March, 2023
2022
Stackelberg model-based human-robot collaboration in removing screws for product remanufacturing.
Robotics Comput. Integr. Manuf., 2022
Robotics Comput. Integr. Manuf., 2022
Automatic identification of mechanical parts for robotic disassembly using the PointNet deep neural network.
Int. J. Manuf. Res., 2022
2021
An Improved Bees Algorithm for Training Deep Recurrent Networks for Sentiment Classification.
Symmetry, 2021
Int. J. Manuf. Res., 2021
Int. J. Comput. Integr. Manuf., 2021
2020
Smart Cutting Tool Integrated With Optical Fiber Sensors for Cutting Force Measurement in Turning.
IEEE Trans. Instrum. Meas., 2020
IEEE Trans Autom. Sci. Eng., 2020
Swarm Evol. Comput., 2020
Disassembly sequence planning using discrete Bees algorithm for human-robot collaboration in remanufacturing.
Robotics Comput. Integr. Manuf., 2020
Collaborative optimization of robotic disassembly sequence planning and robotic disassembly line balancing problem using improved discrete Bees algorithm in remanufacturing<sup>✰</sup>.
Robotics Comput. Integr. Manuf., 2020
Multi-objective evolutionary simulated annealing optimisation for mixed-model multi-robotic disassembly line balancing with interval processing time.
Int. J. Prod. Res., 2020
An AHP-based multi-criteria model for sustainable supply chain development in the renewable energy sector.
Expert Syst. Appl., 2020
Economic modelling of robotic disassembly in end-of-life product recovery for remanufacturing.
Comput. Ind. Eng., 2020
Dynamic risk assessment and active response strategy for industrial human-robot collaboration.
Comput. Ind. Eng., 2020
Multiobjective Ecological Strategy Optimization for Two-Stage Disassembly Line Balancing With Constrained-Resource.
IEEE Access, 2020
2019
Robotic disassembly re-planning using a two-pointer detection strategy and a super-fast bees algorithm.
Robotics Comput. Integr. Manuf., 2019
Int. J. Prod. Res., 2019
Expert Syst. Appl., 2019
Evolutionary many-objective optimization for mixed-model disassembly line balancing with multi-robotic workstations.
Eur. J. Oper. Res., 2019
Comput. Ind. Eng., 2019
2018
Robotic disassembly sequence planning using enhanced discrete bees algorithm in remanufacturing.
Int. J. Prod. Res., 2018
Identification of patterns in control charts for processes with statistically correlated noise.
Int. J. Prod. Res., 2018
Int. J. Artif. Life Res., 2018
Proceedings of the 15th IEEE International Conference on Networking, Sensing and Control, 2018
Energy-efficient concurrent assessment of industrial robot operation based on association rules in manufacturing.
Proceedings of the 15th IEEE International Conference on Networking, Sensing and Control, 2018
Proceedings of the 15th International Conference on Informatics in Control, 2018
Proceedings of the Informatics in Control, Automation and Robotics, 2018
Design of a Novel Six-Axis Force/Torque Sensor based on Optical Fibre Sensing for Robotic Applications.
Proceedings of the 15th International Conference on Informatics in Control, 2018
2017
Hybrid Genetic Bees Algorithm applied to single machine scheduling with earliness and tardiness penalties.
Comput. Ind. Eng., 2017
Proceedings of the Intelligent Robotics and Applications - 10th International Conference, 2017
External Force Detection for Physical Human-Robot Interaction Using Dynamic Model Identification.
Proceedings of the Intelligent Robotics and Applications - 10th International Conference, 2017
2016
Strain Modal Analysis of Small and Light Pipes Using Distributed Fibre Bragg Grating Sensors.
Sensors, 2016
Manufacturing Service Reconfiguration Optimization Using Hybrid Bees Algorithm in Cloud Manufacturing.
Proceedings of the Challenges and Opportunity with Big Data, 2016
Proceedings of the Challenges and Opportunity with Big Data, 2016
2015
A Multiuser Manufacturing Resource Service Composition Method Based on the Bees Algorithm.
Comput. Intell. Neurosci., 2015
Proceedings of the 13th IEEE International Conference on Industrial Informatics, 2015
Proceedings of the 13th IEEE International Conference on Industrial Informatics, 2015
2014
Trans. Comput. Collect. Intell., 2014
A multi-objective supply chain optimisation using enhanced Bees Algorithm with adaptive neighbourhood search and site abandonment strategy.
Swarm Evol. Comput., 2014
Benchmarking and comparison of nature-inspired population-based continuous optimisation algorithms.
Soft Comput., 2014
2013
Simulations of PCB Assembly Optimisation Based on the Bees Algorithm with TRIZ-Inspired Operators.
Proceedings of the Advances in Visual Informatics, 2013
2012
J. Syst. Control. Eng., 2012
Proceedings of the 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems, 2012
Proceedings of the Sixth Asia Modelling Symposium, 2012
2011
Improving Multistage Plastic Deformation Processes by Means of a Sustainable Manufacturing System.
IEEE Syst. J., 2011
Adaptive Bees Algorithm - Bioinspiration from Honeybee Foraging to Optimize Fuel Economy of a Semi-Track Air-Cushion Vehicle.
Comput. J., 2011
2010
J. Syst. Softw., 2010
Int. J. Autom. Comput., 2010
Comput. Hum. Behav., 2010
Using grid computing to accelerate optimization solution: A system of systems approach.
Proceedings of the 5th International Conference on System of Systems Engineering, 2010
Proceedings of the Lean Enterprise Software and Systems - First International Conference, 2010
2009
Int. J. Syst. Sci., 2009
Int. J. Comput. Aided Eng. Technol., 2009
Int. J. Comput. Aided Eng. Technol., 2009
Proceedings of the 7th IEEE International Conference on Industrial Informatics, 2009
2008
The Bees Algorithm and Mechanical Design Optimisation.
Proceedings of the ICINCO 2008, 2008
2007
Proceedings of the Human-Computer Interaction. Interaction Platforms and Techniques, 2007
2006
Eng. Appl. Artif. Intell., 2006
Introduction to the special section on Innovative Production Machines and Systems (I*PROMS).
Eng. Appl. Artif. Intell., 2006
2004
J. Comput. Inf. Sci. Eng., 2004
2002
Int. J. Syst. Sci., 2002
1999
Artif. Intell. Eng., 1999
Self-tuning fuzzy controller design using genetic optimisation and neural network modelling.
Artif. Intell. Eng., 1999
Training Elman and Jordan networks for system identification using genetic algorithms.
Artif. Intell. Eng., 1999
1998
Cross breeding in genetic optimisation and its application to fuzzy logic controller design.
Artif. Intell. Eng., 1998
1997
1996
Intelligent quality systems.
Advanced manufacturing series, Springer, ISBN: 978-3-540-76045-0, 1996
1994
Pattern Recognit., 1994
1993
Identification of linear and nonlinear dynamic systems using recurrent neural networks.
Artif. Intell. Eng., 1993
1991
1988