Bo Feng

Orcid: 0000-0002-1057-3932

Affiliations:
  • Huazhong University of Science and Technology, Wuhan, China


According to our database1, Bo Feng authored at least 21 papers between 2018 and 2024.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

Online presence:

On csauthors.net:

Bibliography

2024
Bottom Crack Detection with Real-Time Signal Amplitude Correction Using EMAT-PEC Composite Sensor.
Sensors, August, 2024

3-D Vision Based Magnetic Particle Indication Measuring for Identification and Evaluation of Cracks in Hub Bearing Raceway.
IEEE Trans. Ind. Informatics, June, 2024

A Novel Leakage Magnetic Field Enhancement Method Based on Permeability Perturbation.
IEEE Trans. Instrum. Meas., 2024

AC Magnetic Flux Leakage Testing With Real-Time Liftoff Compensation Using Double Layer Parallel-Cable Probe.
IEEE Trans. Instrum. Meas., 2024

Feature Enhancement Method for Magnetic Particle Testing Based on Isolation Strip.
IEEE Trans. Instrum. Meas., 2024

Analysis of the Lift-Off Effect in Motion-Induced Eddy Current Testing Based on Semi-Analytical Model.
IEEE Trans. Instrum. Meas., 2024

Magnetostrictive Ultrasonic Torsional Wave Detection Method for High-Density Polyethylene Pipe Weld Status.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

2023
Speed Measurement Method for Moving Conductors Based on Motion-Induced Eddy Current.
IEEE Trans. Instrum. Meas., 2023

Simultaneous imaging defect and measuring lift-off using a double layer parallel-cable-based probe.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

Normal Magnetizing-based Eddy Current Testing Method for Surface Crack and Internal Delamination of Steel Plate.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

Analysis of the Liftoff Effect in Motion-induced Eddy Current Testing.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

Lamb Wave Imaging of Defects in Aluminum Plate using Total Focusing and Image Fusion.
Proceedings of the CAA Symposium on Fault Detection, 2023

2022
A Novel Thermography-Based Dry Magnetic Particle Testing Method.
IEEE Trans. Instrum. Meas., 2022

A Displacement Sensing Method Based on Permanent Magnet and Magnetic Flux Measurement.
Sensors, 2022

2020
Defect Classification With SVM and Wideband Excitation in Multilayer Aluminum Plates.
IEEE Trans. Instrum. Meas., 2020

2019
Locating Defects in Anisotropic CFRP Plates Using ToF-Based Probability Matrix and Neural Networks.
IEEE Trans. Instrum. Meas., 2019

Locating and Imaging Impact Damage with an Integrated System of PZT and Eddy Current Probe.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

Monitoring the Crack Growth by Measurement of Diffracted Lamb Waves.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

2018
Comparison of Inspecting Non-Ferromagnetic and Ferromagnetic Metals Using Velocity Induced Eddy Current Probe.
Sensors, 2018

Eddy current testing of cracks using multi-frequency and noise excitation.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

Localization of defects in woven-fabric type CFRP plate by time of flight of scattering guided wave.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018


  Loading...