2025
An analysis and reliability-based optimization design method of trajectory accuracy for industrial robots considering parametric uncertainties.
Reliab. Eng. Syst. Saf., 2025
Calibration of a dual-robot collaborative system for drilling tasks on spacecraft core cabins.
Ind. Robot, 2025
2024
Magnetorheological elastomer absorber-based chatter suppression in robotic milling.
Robotics Comput. Integr. Manuf., 2024
2023
TranSDFNet: Transformer-Based Truncated Signed Distance Fields for the Shape Design of Removable Partial Denture Clasps.
IEEE J. Biomed. Health Informatics, October, 2023
Optimal closed-loop robust rendezvous guidance with the observability constraint of angles-only navigation.
Trans. Inst. Meas. Control, October, 2023
Robust Multiplexed Piecewise Affine MPC-Based Decentralized Control of Multisatellite Formations Using Aerodynamic Forces.
IEEE Trans. Aerosp. Electron. Syst., October, 2023
Pose accuracy improvement in robotic machining by visually-guided method and experimental investigation.
Robotics Auton. Syst., June, 2023
Two-Timescale Learning-Based Task Offloading for Remote IoT in Integrated Satellite-Terrestrial Networks.
IEEE Internet Things J., 2023
2022
Joint Cache Placement and Cooperative Multicast Beamforming in Integrated Satellite-Terrestrial Networks.
IEEE Trans. Veh. Technol., 2022
Error compensation of industrial robot based on deep belief network and error similarity.
Robotics Comput. Integr. Manuf., 2022
2021
Strong tracking central difference Kalman filter for CubeSat attitude estimation with status mutation.
Trans. Inst. Meas. Control, 2021
Joint Cache Placement and Content Delivery in Satellite-Terrestrial Integrated C-RANs.
Proceedings of the ICC 2021, 2021
Identifying Chinese Herbal Medicine by Image with Three Deep CNNs.
Proceedings of the CCEAI 2021: 5th International Conference on Control Engineering and Artificial Intelligence, 2021
2020
Speed-adaptive dynamic surface attitude control for a satellite with moving masses under input constraints.
Trans. Inst. Meas. Control, 2020
Investigation on chatter stability of robotic rotary ultrasonic milling.
Robotics Comput. Integr. Manuf., 2020
Big data driven jobs remaining time prediction in discrete manufacturing system: a deep learning-based approach.
Int. J. Prod. Res., 2020
A Parallel Gated Recurrent Units (P-GRUs) network for the shifting lateness bottleneck prediction in make-to-order production system.
Comput. Ind. Eng., 2020
Anisotropic design and optimization of conformal gradient lattice structures.
Comput. Aided Des., 2020
2019
Velocity pointing error reduction for symmetric spinning spacecraft via a two-burn scheme.
Trans. Inst. Meas. Control, 2019
Optimal Path Planning-Based Finite-Time Control for Agile CubeSat Attitude Maneuver.
IEEE Access, 2019
2018
Security-Aware Resource Allocation With Delay Constraint for NOMA-Based Cognitive Radio Network.
IEEE Trans. Inf. Forensics Secur., 2018
Power and Bandwidth Allocation for Cognitive Heterogeneous Multi-Homing Networks.
IEEE Trans. Commun., 2018
Processing configuration off-line optimization for functionally redundant robotic drilling tasks.
Robotics Auton. Syst., 2018
Optimal design and modeling of gyroid-based functionally graded cellular structures for additive manufacturing.
Comput. Aided Des., 2018
2017
Computer-aided design of dental inlay restoration based on dual-factor constrained deformation.
Adv. Eng. Softw., 2017
Adaptive Density Optimization of Lattice Structures Sustaining the External Multi-load.
Proceedings of the Image and Graphics - 9th International Conference, 2017
Subdivision Surface Modeling Technology
Springer, ISBN: 978-981-10-3514-2, 2017
2016
Prediction of drill flank wear using ensemble of co-evolutionary particle swarm optimization based-selective neural network ensembles.
J. Intell. Manuf., 2016
2015
A Hybrid Learning-Based Model for Simultaneous Monitoring of Process Mean and Variance.
Qual. Reliab. Eng. Int., 2015
Identification and quantification of concurrent control chart patterns using extreme-point symmetric mode decomposition and extreme learning machines.
Neurocomputing, 2015
Reduction and Push Technology of Cable Harness Information for Complex Mechatronic Products based on Variable Precision Rough Sets.
Proceedings of the SIMULTECH 2015 - Proceedings of the 5th International Conference on Simulation and Modeling Methodologies, Technologies and Applications, Colmar, Alsace, France, 21, 2015
2014
On an optimization representation of decision-theoretic rough set model.
Int. J. Approx. Reason., 2014
Research on RTLS-Based Coordinate Guided Vehicle (CGV) for Material Distribution in Discrete Manufacturing Workshop.
Proceedings of the 2014 IEEE International Conference on Internet of Things, 2014
2013
Minimum cost attribute reduction in decision-theoretic rough set models.
Inf. Sci., 2013
2012
Three-Dimensional Statistical Model for Gingival Contour Reconstruction.
IEEE Trans. Biomed. Eng., 2012
2011
Research of top-down automatic assembling design method based on linkage.
Proceedings of the International Conference on Electronic and Mechanical Engineering and Information Technology, 2011
2010
Single-Tooth Modeling for 3D Dental Model.
Int. J. Biomed. Imaging, 2010
2009
Scale-Space Behavior of Planar-Curve Corners.
IEEE Trans. Pattern Anal. Mach. Intell., 2009
Aircraft Tooling Collaborative Design Based on Multi-agent and PDM.
Concurr. Eng. Res. Appl., 2009
2008
An ASP-Based Product Customization Service Systems for SMEs: A Case Study in Construction Machinery.
Int. J. Enterp. Inf. Syst., 2008
Capability Based Manufacturing Service Rough Matching.
Proceedings of the PACIIA 2008, 2008
Geodesics Computation Based on Direction Tracking.
Proceedings of the International Conference on Cyberworlds 2008, 2008
A multi-agent-based semantic collaboration framework for aircraft tooling design and application.
Proceedings of the 12th International Conference on CSCW in Design, 2008
Deformation Design Technology of Dental Restoration Model.
Proceedings of the 2008 International Conference on BioMedical Engineering and Informatics, 2008
2007
Direct Curvature Scale Space: Theory and Corner Detection.
IEEE Trans. Pattern Anal. Mach. Intell., 2007
Research on the Collaborative Design Technology for Airplane Tooling.
Proceedings of the 11th International Conference on Computer Supported Cooperative Work in Design, 2007
2006
SimOpt: A new simulation optimization system based virtual simulation for manufacturing system.
Simul. Model. Pract. Theory, 2006
Representation and share of part feature information in web-based parts library.
Expert Syst. Appl., 2006
Direct Curvature Scale Space in Corner Detection.
Proceedings of the Structural, 2006
Research of Application Modes of Parts Library System.
Proceedings of the Computer Supported Cooperative Work in Design III, 2006
Research and Implementation of Parts Library Application Level Model.
Proceedings of the 10th International Conference on CSCW in Design, 2006
2005
Data description norm and key techniques of Web-based parts library.
Proceedings of the Ninth International Conference on Computer Supported Cooperative Work in Design, 2005
2004
A Hybrid Method for Fast Computing the Curvature Scale Space Image.
Proceedings of the 2004 Geometric Modeling and Processing (GMP 2004), 2004