Andrea Prato

According to our database, Andrea Prato authored at least 11 papers between 2019 and 2024.

Collaborative distances:

• Dijkstra number of five.
• Erdős number of five.

2024

Comparison between references in a rotating calibration bench for accelerometers.

Luciano Chiominto, Giulio D'Emilia, Emanuela Natale, Andrea Prato, Alessandro Schiavi

Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024

2023

Metrology for next generation "Phygital Sensors".

Alessandro Schiavi, Fabrizio Mazzoleni, Alessio Facello, Andrea Prato

Proceedings of the 2023 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2023

2022

Calibration of a multicomponent MEMS sensor for vibration monitoring of rolling bearings: broad-band and amplitude traceability up to 20 kHz.

Alessandro Schiavi, Ada Fort, Elia Landi, Marco Mugnaini, Valerio Vignoli, Andrea Prato, Fabrizio Mazzoleni, Michele Murgia

Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2022

Mixture distribution modelling of the sensitivities of a digital 3-axis MEMS accelerometers large batch.

Andrea Prato, Francesca R. Pennecchi, Gianfranco Genta, Alessandro Schiavi

Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2022

2021

Towards large-scale calibrations: a statistical analysis on 100 digital 3-axis MEMS accelerometers.

Andrea Prato, Fabrizio Mazzoleni, Francesca R. Pennecchi, Gianfranco Genta, Maurizio Galetto, Alessandro Schiavi

Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2021

Managing the sampling rate variability of digital MEMS accelerometers in dynamic calibration.

Giulio D'Emilia, Antonella Gaspari, Emanuela Natale, Andrea Prato, Fabrizio Mazzoleni, Alessandro Schiavi

Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2021

On the trustworthiness of a digital 3D MEMS gyroscope responsiveness to dynamic accelerations for ADAS applications.

Alessandro Schiavi, Paola Iacomussi, Laura Rossi, Andrea Prato, Fabrizio Mazzoleni, Alessio Facello, Gianfranco Genta, Raffaele Signoretti

Proceedings of the IEEE International Workshop on Metrology for Automotive, 2021

Accurate coil springs axial and transverse stiffness measurements with multicomponent testing machines.

Andrea Prato, Gianfranco Genta, Maurizio Galetto, Fabrizio Mazzoleni, Alessio Facello, Alessandro Germak

Proceedings of the IEEE International Workshop on Metrology for Automotive, 2021

2020

Calibration of digital 3-axis MEMS accelerometers: A double-blind «multi-bilateral» comparison.

Alessandro Schiavi, Andrea Prato, Fabrizio Mazzoleni, Giulio D'Emilia, Antonella Gaspari, Emanuela Natale

Proceedings of the 2020 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2020

A reliable sampling method to reduce large sets of measurements: a case study on the calibration of digital 3-axis MEMS accelerometers.

Andrea Prato, Alessandro Schiavi, Fabrizio Mazzoleni, Amara Touré, Gianfranco Genta, Maurizio Galetto

Proceedings of the 2020 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2020

2019

Metrological traceability for digital sensors in smart manufacturing: calibration of MEMS accelerometers and microphones at INRiM.

Andrea Prato, Fabrizio Mazzoleni, Alessandro Schiavi

Proceedings of the 2nd Workshop on Metrology for Industry 4.0 and IoT MetroInd4.0&IoT 2019, 2019