Alessandra Flammini

Orcid: 0000-0002-2046-0720

According to our database1, Alessandra Flammini authored at least 207 papers between 1998 and 2024.

Collaborative distances:
  • Dijkstra number2 of five.
  • Erdős number3 of four.

Timeline

Legend:

Book 
In proceedings 
Article 
PhD thesis 
Dataset
Other 

Links

On csauthors.net:

Bibliography

2024
Index Air Quality Monitoring for Light and Active Mobility.
Sensors, May, 2024

End-to-End Emulation of LoRaWAN Architecture and Infrastructure in Complex Smart City Scenarios Exploiting Containers.
Sensors, April, 2024

LoRaWAN end device disaggregation and decomposition by means of lightweight virtualization.
Internet Things, April, 2024

Virtual PLC in Industrial Edge Platform: Performance Evaluation of Supervision and Control Communication.
IEEE Trans. Instrum. Meas., 2024

On computing and real-time communication performance of containerized virtual PLCs.
Proceedings of the 20th IEEE International Conference on Factory Communication Systems, 2024

Suitability of LoRaWAN and solar harvesting in IoT-ready fall detection solutions for light mobility.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024

Anomaly Detection in Industrial Networks using Distributed Observation of Statistical Behavior.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 and IoT, 2024

Preliminary Analysis of Sensor Fusion Dataset for Cyclists' Gesture Recognition.
Proceedings of the IEEE International Workshop on Metrology for Automotive, 2024

ICT-Equipped Portable E-Bike Charging Station Powered by Renewables for Mass Cycling Events.
Proceedings of the IEEE International Workshop on Metrology for Automotive, 2024

Enhancing C-V2X Vehicle Platooning: A Dual-Strategy of Time Synchronisation and Partition-Based Scheduling.
Proceedings of the 2024 IEEE International Symposium on Measurements & Networking (M&N), 2024

Implementing a Software Defined LoRaWAN Node Exploiting Container-Based Lightweight Virtualization.
Proceedings of the 2024 IEEE International Symposium on Measurements & Networking (M&N), 2024

Cyclist Safety Device based on Spectral Audio Processing for Approaching Vehicles Detection.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

On the use of LPWAN for enabling connected power tools: the LoRaWAN case.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2024

Design of an Experimental Setup for Generating Electric Vehicle Charging Data Sets.
Proceedings of the 14th IEEE International Workshop on Applied Measurements for Power Systems, 2024

2023
Enhancing Safety on Construction Sites: A UWB-Based Proximity Warning System Ensuring GDPR Compliance to Prevent Collision Hazards.
Sensors, December, 2023

Assessing a Methodology for Evaluating the Latency of IPv6 with SCHC Compression in LoRaWAN Deployments.
Sensors, March, 2023

Assessment of Time Performance of Lightweight Virtualization for Edge Computing Applications.
Proceedings of the 19th IEEE International Conference on Factory Communication Systems, 2023

LoRaVine: Using LoRaWAN for Smart Vineyards Microclimate Monitoring.
Proceedings of the IEEE Sensors Applications Symposium, 2023

Can adaptive strategies sustain bidirectional LoRaWAN traffic?
Proceedings of the 2023 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2023

Applying Automatic System Log Analysis to Industrial Automation Systems for IoT Integration.
Proceedings of the 2023 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2023

Design of an ICT Platform for a Sustainable Charging of Light Electric Vehicles Using Renewable Resources.
Proceedings of the IEEE International Workshop on Metrology for Automotive, 2023

Exploiting Accurate Ultra Wide Band Time Synchronization at the Application Level in Embedded Systems.
Proceedings of the IEEE International Symposium on Precision Clock Synchronization for Measurement, 2023

Accurate Time Synchronization in a low-cost platform for the Design of a Distributed Digital Events Detector.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2023

Edge-Based Technology for the Design of Bridges Alerting System: A Practical Case.
Proceedings of the IEEE AFRICON 2023, Nairobi, Kenya, September 20-22, 2023, 2023

2022
On the Use of LoRaWAN and Cloud Platforms for Diversification of Mobility-as-a-Service Infrastructure in Smart City Scenarios.
IEEE Trans. Instrum. Meas., 2022

Resilient Time Synchronization Opportunistically Exploiting UWB RTLS Infrastructure.
IEEE Trans. Instrum. Meas., 2022

Minimal Wide-Range Resistive Sensor-to-Microcontroller Interface for Versatile IoT Nodes.
IEEE Trans. Instrum. Meas., 2022

Adding Redundancy to LoRaWAN for Emergency Communications at the Factory Floor.
IEEE Trans. Ind. Informatics, 2022

Simultaneous frame transmission for critical LoRaWAN communications.
Proceedings of the 18th IEEE International Conference on Factory Communication Systems, 2022

On feature selection in automatic detection of fitness exercises using LSTM models.
Proceedings of the IEEE Sensors Applications Symposium, 2022

Simulating scalability of a transparent LoRaWan enhancement for emergency communication.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2022

Improving LoRa-REP scalability in emergency scenarios by means of slotted delay.
Proceedings of the IEEE International Symposium on Measurements & Networking, 2022

An Experimental Characterization of Time Synchronization in Multiple UWB Location Cells.
Proceedings of the IEEE International Symposium on Precision Clock Synchronization for Measurement, 2022

An Evaluation of UWB for Location-Based Hands-Free Authentication Charging of Electric Vehicles.
Proceedings of the 31st IEEE International Symposium on Industrial Electronics, 2022

An Experimental Characterization of Chain of PLLs for Wired Clock Synchronization of UWB Anchors for Indoor Location.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

Improving classification capability of industrial-grade ATE by means of cloud architecture.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2022

Evaluating UWB for Wireless Clock Synchronization of an IEC 61850 Stand Alone Merging Unit.
Proceedings of the 12th IEEE International Workshop on Applied Measurements for Power Systems, 2022

2021
Improving Redundancy in LoRaWAN for Mixed-Criticality Scenarios.
IEEE Syst. J., 2021

Investigating redundancy of LoRaWAN for emergency notifications in industrial plants.
Proceedings of the 17th IEEE International Conference on Factory Communication Systems, 2021

Turning old into new: adding LoRaWAN connectivity to PLC in brownfield installations.
Proceedings of the IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2021

Multimodal Electric Vehicle Supply Equipment: Toward a Sustainable and Resilient Mobility.
Proceedings of the IEEE International Workshop on Metrology for Automotive, 2021

Experimental characterization of an IoV framework leveraging mobile wireless technologies.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

Simple and robust microcontroller-based acquisition system for differential capacitive sensors.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2021

Impact of the Measurement Time Resolution on Energy Key Performance Indicators for Distributed Energy Resources: An Experimental Analysis.
Proceedings of the 11th IEEE International Workshop on Applied Measurements for Power Systems, 2021

Time Continuous VCII-Based Fully Analog Interface for Differential Capacitive Sensors.
Proceedings of the Sensors and Microsystems - Proceedings of AISEM 2021, 2021

An Evaluation of Low-Cost Self-Localization Service Exploiting Angle of Arrival for Industrial Cyber-Physical Systems.
Proceedings of the 2021 IEEE AFRICON, 2021

2020
Full-Analog Parasitic Capacitance Compensation for AC-Excited Differential Sensors.
IEEE Trans. Instrum. Meas., 2020

Design of a Time Dissemination System Using Chirp Modulation for Medium Voltage Smart Grid Applications.
IEEE Trans. Instrum. Meas., 2020

LoRaWAN Range Extender for Industrial IoT.
IEEE Trans. Ind. Informatics, 2020

Evaluation of the Use of Class B LoRaWAN for the Coordination of Distributed Interface Protection Systems in Smart Grids.
J. Sens. Actuator Networks, 2020

A new LoRaWAN adaptive strategy for smart metering applications.
Proceedings of the 2020 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2020

Evaluation of the impact on industrial applications of NTP Used by IoT devices.
Proceedings of the 2020 IEEE International Workshop on Metrology for Industry 4.0 & IoT, 2020

Hybrid indoor and outdoor localization for elderly care applications with LoRaWAN.
Proceedings of the 2020 IEEE International Symposium on Medical Measurements and Applications, 2020

A Cognitive Strategy for Renovation and Maintenance of Buildings through IoT Technology.
Proceedings of the 46th Annual Conference of the IEEE Industrial Electronics Society, 2020

Evaluation of the impact of Cloud Database services on Industrial IoT Applications.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

Simple and power efficient interface for AC-excited differential sensors.
Proceedings of the 2020 IEEE International Instrumentation and Measurement Technology Conference, 2020

2019
Synchronization Uncertainty Versus Power Efficiency in LoRaWAN Networks.
IEEE Trans. Instrum. Meas., 2019

A Testing Framework for the Monitoring and Performance Analysis of Distributed Energy Systems.
IEEE Trans. Instrum. Meas., 2019

Uncertainty Analysis in Time Distribution Mechanisms for OMS Smart Meters: The Last-Mile Time Synchronization Issue.
IEEE Trans. Instrum. Meas., 2019

Framework-Oriented Approach to Ease the Development of Ambient Assisted-Living Systems.
IEEE Syst. J., 2019

An IoT Based Architecture for Enhancing the Effectiveness of Prototype Medical Instruments Applied to Neurodegenerative Disease Diagnosis.
Sensors, 2019

Exploiting localization systems for LoRaWAN transmission scheduling in industrial applications.
Proceedings of the 15th IEEE International Workshop on Factory Communication Systems, 2019

Lightweight Machine Learning-Based Approach for Supervision of Fitness Workout.
Proceedings of the IEEE Sensors Applications Symposium, 2019

Cluster of IoT Sensors for Smart Cities: Impact of the Communication Infrastructure over Computational Performance.
Proceedings of the IEEE Sensors Applications Symposium, 2019

Evaluating indoor and outdoor localization services for LoRaWAN in Smart City applications.
Proceedings of the 2nd Workshop on Metrology for Industry 4.0 and IoT MetroInd4.0&IoT 2019, 2019

On the evaluation of application level delays in public LoRaWAN networks.
Proceedings of the 5th IEEE International Symposium on Measurements & Networking, 2019

Are Cloud Services Aware of Time? An Experimental Analysis oriented to Industry 4.0.
Proceedings of the 2019 IEEE International Symposium on Precision Clock Synchronization for Measurement, 2019

Software-based Time Synchronization for Integrating Power Hardware in the Loop Emulation in IEEE1588 Power Profile Testbed.
Proceedings of the 2019 IEEE International Symposium on Precision Clock Synchronization for Measurement, 2019

Impact of Data Model on Performance of Time Series Database for Internet of Things Applications.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

Architecture for the interconnection of prototypical medical instrument via cloud services.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2019

An Experimental Characterization of Time of Arrival Accuracy for Time Synchronization of Medium Voltage Smart Grid Solutions.
Proceedings of the 10th IEEE International Workshop on Applied Measurements for Power Systems, 2019

On the Use of Class B LoRaWAN for the Coordination of Smart Interface Protection Systems.
Proceedings of the 10th IEEE International Workshop on Applied Measurements for Power Systems, 2019

2018
Characterization of IP-Based Communication for Smart Grid Using Software-Defined Networking.
IEEE Trans. Instrum. Meas., 2018

Delay Estimation of Industrial IoT Applications Based on Messaging Protocols.
IEEE Trans. Instrum. Meas., 2018

Autobalancing Analog Front End for Full-Range Differential Capacitive Sensing.
IEEE Trans. Instrum. Meas., 2018

Enhancing access to industrial iot measurements by means of location based services.
IEEE Instrum. Meas. Mag., 2018

Enhanced flexible LoRaWAN node for industrial IoT.
Proceedings of the 14th IEEE International Workshop on Factory Communication Systems, 2018

Embedded platform-based system for early detection of Alzheimer disease through transcranial magnetic stimulation.
Proceedings of the 2018 IEEE Sensors Applications Symposium, 2018

On the feasibility of mobile sensing and tracking applications based on LPWAN.
Proceedings of the 2018 IEEE Sensors Applications Symposium, 2018

Remote and non-invasive monitoring of elderly in a smart city context.
Proceedings of the 2018 IEEE Sensors Applications Symposium, 2018

On the Use of IoT Sensors for Indoor Conditions Assessment and Tuning of Occupancy Rates Models.
Proceedings of the 2018 Workshop on Metrology for Industry 4.0 and IoT, 2018

Evaluation of Communication Delay in IOT Applications Based on OPCUA.
Proceedings of the 2018 Workshop on Metrology for Industry 4.0 and IoT, 2018

Indoor Localization for Evacuation Management in Emergency Scenarios.
Proceedings of the 2018 Workshop on Metrology for Industry 4.0 and IoT, 2018

A Test Bench for Evaluating Communication Delays in LoRaWAnapplications.
Proceedings of the 2018 Workshop on Metrology for Industry 4.0 and IoT, 2018

Exploiting Time Synchronization as Side Effect in UWB Real-Time Localization Devices.
Proceedings of the IEEE International Symposium on Precision Clock Synchronization for Measurement, 2018

Fully analog automatic stray compensation for bridge-based differential capacitive sensor interfaces.
Proceedings of the 2018 International Conference on IC Design & Technology, 2018

Characterization of 1 Gbps fiber optics transceiver for high accuracy synchronization over Ethernet.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

Metrological issues in the integration of heterogeneous lot devices for energy efficiency in cognitive buildings.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

M<sup>3</sup>IoT - Message-oriented middleware for M-health Internet of Things: Design and validation.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

An easy solution to use external sensors in Android: Experimental characterization.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2018

Testing Facility for the Characterization of the Integration of E-Vehicles into Smart Grid in Presence of Renewable Energy.
Proceedings of the Applications in Electronics Pervading Industry, Environment and Society, 2018

Characterization of Energy Storage Sytems for Renewable Generators: An Experimental Testbed.
Proceedings of the 9th IEEE International Workshop on Applied Measurements for Power Systems, 2018

2017
Evaluation of the IoT LoRaWAN Solution for Distributed Measurement Applications.
IEEE Trans. Instrum. Meas., 2017

Special Issue on The 2016 IEEE International Instrumentation and Measurement Technology Conference.
IEEE Trans. Instrum. Meas., 2017

Virtual Respiratory Rate Sensors: An Example of A Smartphone-Based Integrated and Multiparametric mHealth Gateway.
IEEE Trans. Instrum. Meas., 2017

Performance Assessment of Chirp-Based Time Dissemination and Data Communications in Inductively Coupled Links.
IEEE Trans. Instrum. Meas., 2017

Using LoRa for industrial wireless networks.
Proceedings of the IEEE 13th International Workshop on Factory Communication Systems, 2017

On the evaluation of LoRaWAN virtual channels orthogonality for dense distributed systems.
Proceedings of the IEEE International Workshop on Measurement and Networking, 2017

Analisys of modular bridge platform for heterogeneous software defined networking in smart city applications.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

IEEE 802.11s performance assessment: From simulations to real-world experiments.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2017

NB PLC and Software Defined Networking for Smart Grid Applications.
Proceedings of the IEEE International Workshop on Applied Measurements for Power Systems, 2017

2016
Enhancing Accuracy and Robustness of Frequency Transfer Using Synchronous Ethernet and Multiple Network Paths.
IEEE Trans. Instrum. Meas., 2016

Enhanced software defined meter for smart utility networks.
Comput. Stand. Interfaces, 2016

Time synchronization over heterogeneous network for smart grid application: Design and characterization of a real case.
Ad Hoc Networks, 2016

Integrating remote sensors in a smartphone: The project "sensors for ANDROID in embedded systems".
Proceedings of the IEEE Sensors Applications Symposium, 2016

Efficient R-peak detection algorithm for real-time analysis of ECG in portable devices.
Proceedings of the IEEE Sensors Applications Symposium, 2016

The WearPhone: Changing smartphones into multichannel vital signs monitors.
Proceedings of the 2016 IEEE International Symposium on Medical Measurements and Applications, 2016

Exploiting Internet of Things and building information modeling framework for management of cognitive buildings.
Proceedings of the IEEE International Smart Cities Conference, 2016

An application of IEEE 802.11ac to Smart Grid automation based on IEC 61850.
Proceedings of the IECON 2016, 2016

Distributed measurement system for the assesment of IEC 61850 transfer time in smart grid.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2016

Performance of all-digital waveform generators for narrowband power line communications.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2016

Enabling PROFINET devices to work in IoT: Characterization and requirements.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2016

2015
A Distributed PMU for Electrical Substations With Wireless Redundant Process Bus.
IEEE Trans. Instrum. Meas., 2015

On the Use of Magnetically Coupled Resonators for Chirp-Based Timestamping.
IEEE Trans. Instrum. Meas., 2015

Performance analysis of power line communication in industrial power distribution network.
Comput. Stand. Interfaces, 2015

On the use of multiple MAC registration protocol in industrial networks.
Proceedings of the IEEE World Conference on Factory Communication Systems, 2015

Using smartglasses for utility-meter reading.
Proceedings of the IEEE Sensors Applications Symposium, 2015

Smart meters as part of a sensor network for monitoring the low voltage grid.
Proceedings of the IEEE Sensors Applications Symposium, 2015

Adopting IoT framework for Energy Management of Smart Building: A real test-case.
Proceedings of the 1st IEEE International Forum on Research and Technologies for Society and Industry Leveraging a better tomorrow, 2015

A smartphone-enhanced pill-dispenser providing patient identification and in-take recognition.
Proceedings of the 2015 IEEE International Symposium on Medical Measurements and Applications, 2015

Simple interference detection and classification for industrial Wireless Sensor Networks.
Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

Introducing the measurement virtual-eGateway for domestic energy management.
Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

On the use of Synchronous Ethernet over multiple paths for syntonization of distributed systems.
Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

Assessment of time synchronization quality in a distributed PMU.
Proceedings of the 2015 IEEE International Instrumentation and Measurement Technology Conference (I2MTC) Proceedings, 2015

Inexpensive SDR-based longwave radio controlled clock for time dissemination in industrial wireless sensor networks.
Proceedings of the IEEE International Conference on Automation Science and Engineering, 2015

First experimental characterization of LTE for automation of smart grid.
Proceedings of the IEEE International Workshop on Applied Measurements for Power Systems, 2015

2014
A Servo-Clock Model for Chains of Transparent Clocks Affected by Synchronization Period Jitter.
IEEE Trans. Instrum. Meas., 2014

Timestamping and Ranging Performance for IEEE 802.15.4 CSS Systems.
IEEE Trans. Instrum. Meas., 2014

A new 0.35 μm CMOS electronic interface for wide range floating capacitive and grounded/floating resistive sensor applications.
Microelectron. J., 2014

Adding accurate timestamping capability to wireless networks for smart grids.
Comput. Networks, 2014

Multipath redundancy for industrial networks using IEEE 802.1aq Shortest Path Bridging.
Proceedings of the 10th IEEE Workshop on Factory Communication Systems, 2014

Acquisition and elaboration of cardiac signal in android Smartphone devices.
Proceedings of the IEEE Sensors Applications Symposium, 2014

Low-power wireless interface for handheld smart metering devices.
Proceedings of the IEEE Sensors Applications Symposium, 2014

A wearable smartphone-based system for electrocardiogram acquisition.
Proceedings of the 2014 IEEE International Symposium on Medical Measurements and Applications, 2014

Synchronization requirements of a Power Quality measurement system for the distribution grid.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

Flexible Wireless Sensor Network for smart lighting applications.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

Timestamping of IEEE 802.15.4 CSS by CORDIC-based Chirp interpolation.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

Performance assessment of vibration sensing using smartdevices.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

Improving availability of distributed PMU in electrical substations using wireless redundant process bus.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2014

2013
Automation of Distribution Grids With IEC 61850: A First Approach Using Broadband Power Line Communication.
IEEE Trans. Instrum. Meas., 2013

Timestamping of IEEE 802.15.4a CSS Signals for Wireless Ranging and Time Synchronization.
IEEE Trans. Instrum. Meas., 2013

A New IED With PMU Functionalities for Electrical Substations.
IEEE Trans. Instrum. Meas., 2013

Low Complexity UWB Radios for Precise Wireless Sensor Network Synchronization.
IEEE Trans. Instrum. Meas., 2013

Master Failure Detection Protocol in Internal Synchronization Environment.
IEEE Trans. Instrum. Meas., 2013

Improving simulation of wireless networked control systems based on WirelessHART.
Comput. Stand. Interfaces, 2013

Performance analysis of a clock state estimator for PROFINET IO IRT synchronization.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

New test bench for evaluation of IEEE 802.15.4 CSS timestamping capabilities.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Analysis of synchronization performance in redundant networks for substation automation.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Characterization of multi-standard Power Line Communication on low-voltage grid.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

On the use of PRIME PowerLine Communication in industrial applications: Modbus a first testcase.
Proceedings of the IEEE International Instrumentation and Measurement Technology Conference, 2013

Co-simulation of network infrastructure for substation automation systems.
Proceedings of 2013 IEEE 18th Conference on Emerging Technologies & Factory Automation, 2013

Experimental characterization of time synchronization over a heterogeneous network for Smart Grids.
Proceedings of the IEEE International Workshop on Applied Measurements for Power Systems, 2013

Advanced networks for distributed measurement in substation automation systems.
Proceedings of the IEEE International Workshop on Applied Measurements for Power Systems, 2013

2012
A Software-Only PTP Synchronization for Power System State Estimation With PMUs.
IEEE Trans. Instrum. Meas., 2012

Evaluation of Time Gateways for Synchronization of Substation Automation Systems.
IEEE Trans. Instrum. Meas., 2012

Experimental Characterization of Uncertainty Sources in a Software-Only Synchronization System.
IEEE Trans. Instrum. Meas., 2012

Measurement of Resistance and Capacitance of MOX Sensors With High Sampling Rate.
IEEE Trans. Instrum. Meas., 2012

An Electronic System to Heat MOX Sensors With Synchronized and Programmable Thermal Profiles.
IEEE Trans. Instrum. Meas., 2012

Mixing Real Time Ethernet traffic on the IEC 61850 Process bus.
Proceedings of the 9th IEEE International Workshop on Factory Communication Systems, 2012

MS-Aloha: Preliminary analysis of its suitability for wireless automation.
Proceedings of 2012 IEEE 17th International Conference on Emerging Technologies & Factory Automation, 2012

Experimental characterization of service latency over Broadband Power Line in Medium Voltage grid.
Proceedings of the IEEE International Workshop on Applied Measurements for Power Systems, 2012

An IEC 61850-Compliant distributed PMU for electrical substations.
Proceedings of the IEEE International Workshop on Applied Measurements for Power Systems, 2012

2011
New Architecture for a Wireless Smart Sensor Based on a Software-Defined Radio.
IEEE Trans. Instrum. Meas., 2011

On the Use of IEEE 1588 in Existing IEC 61850-Based SASs: Current Behavior and Future Challenges.
IEEE Trans. Instrum. Meas., 2011

Architecture of an embedded time gateway between PTP and SNTP.
Proceedings of the Industrial Embedded Systems (SIES), 2011

A Reliable and Self-Aware Clock for reference time failure detection in internal synchronization environment.
Proceedings of the IEEE International Workshop on Measurement and Networking, 2011

Large PROFINET IO RT networks for factory automation: A case study.
Proceedings of the IEEE 16th Conference on Emerging Technologies & Factory Automation, 2011

Applying PTP-to-SNTP time-gateway to IEC61850 systems.
Proceedings of the IEEE 16th Conference on Emerging Technologies & Factory Automation, 2011

Time synchronization concerns in substation automation system.
Proceedings of the IEEE 2nd International Workshop on Applied Measurements for Power Systems, 2011

2010
On the Implementation and Performance Assessment of a WirelessHART Distributed Packet Analyzer.
IEEE Trans. Instrum. Meas., 2010

Efficient Sensor Signal Filtering for Autonomous Wireless Nodes.
IEEE Trans. Instrum. Meas., 2010

A New and Fast-Readout Interface for Resistive Chemical Sensors.
IEEE Trans. Instrum. Meas., 2010

On the Seamless Interconnection of IEEE1588-based Devices using a PROFINET IO infrastructure.
IEEE Trans. Ind. Informatics, 2010

Integration of existing IEC61850-based SAS within new high-availability architectures.
Proceedings of the IEEE International Workshop on Applied Measurements For Power Systems, 2010

2009
Model and Experimental Characterization of the Dynamic Behavior of Low-Power Carbon Monoxide MOX Sensors Operated With Pulsed Temperature Profiles.
IEEE Trans. Instrum. Meas., 2009

Design and Implementation of a Wireless Fieldbus for Plastic Machineries.
IEEE Trans. Ind. Electron., 2009

Wired and wireless sensor networks for industrial applications.
Microelectron. J., 2009

Integrated CMOS Resistance-to-period Converter with Parasitic Capacitance Evaluation.
Proceedings of the International Symposium on Circuits and Systems (ISCAS 2009), 2009

2008
A CMOS Integrable Oscillator-Based Front End for High-Dynamic-Range Resistive Sensors.
IEEE Trans. Instrum. Meas., 2008

IEEE 1588-Based Synchronization System for a Displacement Sensor Network.
IEEE Trans. Instrum. Meas., 2008

USB Sensor Network for Industrial Applications.
IEEE Trans. Instrum. Meas., 2008

A New Instrument for Real-Time Ethernet Performance Measurement.
IEEE Trans. Instrum. Meas., 2008

A Distributed Instrument for Performance Analysis of Real-Time Ethernet Networks.
IEEE Trans. Ind. Informatics, 2008

Synchronized Wireless Sensor Networks for coexistence.
Proceedings of 13th IEEE International Conference on Emerging Technologies and Factory Automation, 2008

Clock synchronization of PTP-based devices through PROFINET IO networks.
Proceedings of 13th IEEE International Conference on Emerging Technologies and Factory Automation, 2008

2007
Least Mean Square Method for LVDT Signal Processing.
IEEE Trans. Instrum. Meas., 2007

Environmental Telemonitoring: A Flexible GSM-DECT-Based Solution.
IEEE Trans. Instrum. Meas., 2007

Application of an ANFIS Algorithm to Sensor Data Processing.
IEEE Trans. Instrum. Meas., 2007

Evaluation of timing characteristics of a prototype system based on PROFINET IO RT_Class 3.
Proceedings of 12th IEEE International Conference on Emerging Technologies and Factory Automation, 2007

A new distributed instrument for real time ethernet networks: experimental tests and characterization.
Proceedings of 12th IEEE International Conference on Emerging Technologies and Factory Automation, 2007

2006
IEEE802.11 sensor networking.
IEEE Trans. Instrum. Meas., 2006

Digital signal processing for biaxial position measurement with a pyroelectric sensor array.
IEEE Trans. Instrum. Meas., 2006

Performance analysis of PROFINET networks.
Comput. Stand. Interfaces, 2006

Experimental analysis to estimate jitter in PROFINET IO Class 1 networks.
Proceedings of 11th IEEE International Conference on Emerging Technologies and Factory Automation, 2006

GDNET: a Specific Approach to Distributed Input/Output Synchronization for Plastic Machinery.
Proceedings of 11th IEEE International Conference on Emerging Technologies and Factory Automation, 2006

2005
A multichannel DSP-based instrument for displacement measurement using differential variable reluctance transducer.
IEEE Trans. Instrum. Meas., 2005

A Bluetooth-based sensor network with Web interface.
IEEE Trans. Instrum. Meas., 2005

2004
A low-cost interface to high-value resistive sensors varying over a wide range.
IEEE Trans. Instrum. Meas., 2004

2003
High-resolution multichannel instrument for resonant sensor array.
IEEE Trans. Instrum. Meas., 2003

Sensor integration in industrial environment: from fieldbus to web sensors.
Comput. Stand. Interfaces, 2003

2002
Robust estimation of magnetic Barkhausen noise based on a numerical approach.
IEEE Trans. Instrum. Meas., 2002

Fast and robust estimation of resonant sensors signal frequency.
IEEE Trans. Instrum. Meas., 2002

Audio Classification in Speech and Music: A Comparison between a Statistical and a Neural Approach.
EURASIP J. Adv. Signal Process., 2002

2001
A low-cost diagnostic tool for stepping motors.
IEEE Trans. Instrum. Meas., 2001

2000
Robust and accurate real-time estimation of sensors signal parameters by a DSP approach.
IEEE Trans. Instrum. Meas., 2000

1999
Application of an optimal look-up table to sensor data processing.
IEEE Trans. Instrum. Meas., 1999

1998
Application of an FFT-based algorithm to signal processing of LVDT position sensors.
IEEE Trans. Instrum. Meas., 1998


  Loading...