Alberto Tessarolo
Orcid: 0000-0002-7667-5552
According to our database1,
Alberto Tessarolo
authored at least 29 papers
between 2008 and 2024.
Collaborative distances:
Collaborative distances:
Timeline
Legend:
Book In proceedings Article PhD thesis Dataset OtherLinks
On csauthors.net:
Bibliography
2024
A General Approach to the Design of Multi-Layer Fractional-Slot Concentrated Windings With Arbitrary Number of Slots, Poles, and Phases.
IEEE Access, 2024
Simple and Accurate Computation of Rotor Eddy-Current Losses in Surface-Mounted Permanent Magnet Machines Accounting for Magnet Circumferential Segmentation.
IEEE Access, 2024
2022
IEEE Access, 2022
2020
Design, Prototyping and Testing of a Rotating Electrical Machine With Linear Geometry for Shipboard Applications.
IEEE Access, 2020
IEEE Access, 2020
Optimal Selection of Rotor Bar Number for Minimizing Torque and Current Pulsations Due to Rotor Slot Harmonics in Three-Phase Cage Induction Motors.
IEEE Access, 2020
2019
Enhanced Power Sharing Transient With Droop Controllers for Multithree-Phase Synchronous Electrical Machines.
IEEE Trans. Ind. Electron., 2019
Excitation System Technologies for Wound-Field Synchronous Machines: Survey of Solutions and Evolving Trends.
IEEE Access, 2019
2018
FEA-assisted steady-state modelling of a spoke type IPM machine with enhanced flux weakening capability.
Proceedings of the Thirteenth International Conference on Ecological Vehicles and Renewable Energies, 2018
MEC-based prediction of the air gap flux density distribution of spoke-type IPM machines.
Proceedings of the Thirteenth International Conference on Ecological Vehicles and Renewable Energies, 2018
2017
Speed control with load sharing capabilities for multi-three phase synchronous motors.
Proceedings of the IECON 2017 - 43rd Annual Conference of the IEEE Industrial Electronics Society, Beijing, China, October 29, 2017
5-Phase PM brushless DC motor current optimization - Part II: Modelization and numerical solution for a healthy or faulty drive.
Proceedings of the IEEE EUROCON 2017 -17th International Conference on Smart Technologies, 2017
5-Phase PM brushless DC motor current optimization - Part I: Modelization and analytical solution for a healthy drive.
Proceedings of the IEEE EUROCON 2017 -17th International Conference on Smart Technologies, 2017
2016
Improved four-layer winding design for a 12-slot 10-pole permanent magnet machine using unequal tooth coils.
Proceedings of the IECON 2016, 2016
Investigation into electrical resonance phenomena in the field circuit of wound-rotor synchronous machines.
Proceedings of the IECON 2016, 2016
2015
Computationally Efficient Thermal Analysis of a Low-Speed High-Thrust Linear Electric Actuator With a Three-Dimensional Thermal Network Approach.
IEEE Trans. Ind. Electron., 2015
Proceedings of the 1st IEEE International Forum on Research and Technologies for Society and Industry Leveraging a better tomorrow, 2015
Stator inductance matrix diagonalization algorithms for different multi-phase winding schemes of round-rotor electric machines part II. Examples and validations.
Proceedings of the IEEE EUROCON 2015, 2015
Stator inductance matrix diagonalization algorithms for different multi-phase winding schemes of round-rotor electric machines part I. theory.
Proceedings of the IEEE EUROCON 2015, 2015
2014
Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014
A finite reluctance approach to electrical machine modeling and simulation: Magnetic network-based field solutions in MatLab environment.
Proceedings of the IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society, Dallas, TX, USA, October 29, 2014
2013
Investigation Into the High-Frequency Limits and Performance of Load Commutated Inverters for High-Speed Synchronous Motor Drives.
IEEE Trans. Ind. Electron., 2013
Modeling of split-phase machines in Park's coordinates. Part II: Equivalent circuit representation.
Proceedings of Eurocon 2013, 2013
Modeling of split-phase machines in Park's coordinates. Part I: Theoretical foundations.
Proceedings of Eurocon 2013, 2013
2012
Time-Stepping Finite-Element Analysis of a 14-MVA Salient-Pole Shipboard Alternator for Different Damper Winding Design Solutions.
IEEE Trans. Ind. Electron., 2012
2011
On the computation of rotor losses through a set of harmonic finite element analyses in fractional-slot concentrated-coil permanent-magnet machines.
Proceedings of EUROCON 2011, 2011
Performance of a high-power induction motor supplied by two in-phase voltage-source inverters.
Proceedings of EUROCON 2011, 2011
2010
On the Modeling of Commutation Transients in Split-Phase Synchronous Motors Supplied by Multiple Load-Commutated Inverters.
IEEE Trans. Ind. Electron., 2010
2008
An Analytical-Numeric Method for Stator End-Coil Leakage Inductance Computation in Multi-Phase Electric Machines.
Proceedings of the Industry Applications Society Annual Meeting, 2008