A. Erman Tekkaya

According to our database, A. Erman Tekkaya authored at least 47 papers between 1999 and 2021.

Collaborative distances:

• Dijkstra number of five.
• Erdős number of five.

2021

Reduced order modelling for spatial-temporal temperature and property estimation in a multi-stage hot sheet metal forming process.

Daniel Kloeser, Juri Martschin, Thomas Meurer, A. Erman Tekkaya

CoRR, 2021

2020

Magnetic Field Measurements during Magnetic Pulse Welding Using CMR-B-Scalar Sensors.

Voitech Stankevic, Joern Lueg-Althoff, Marlon Hahn, A. Erman Tekkaya, Nerija Zurauskiene, Justas Dilys, Jonas Klimantavicius, Skirmantas Kersulis, Ceslovas Simkevicius, Saulius Balevicius

Sensors, 2020

Remote Lab to Illustrate the Influence of Process Parameters on Product Properties in Additive Manufacturing.

Siddharth Upadhya, Joshua Grodotzki, Alessandro Selvaggio, Oleksandr Mogylenko, A. Erman Tekkaya

Proceedings of the Cross Reality and Data Science in Engineering, 2020

Augmented Reality Application for the Mobile Measurement of Strain Distributions.

Oleksandr Mogylenko, Alessandro Selvaggio, Siddharth Upadhya, Joshua Grodotzki, A. Erman Tekkaya

Proceedings of the Cross Reality and Data Science in Engineering, 2020

2019

Development of a Remote Tube Bending Lab to Illustrate Springback and Determine Process Limits.

Siddharth Upadhya, Alessandro Selvaggio, Tobias R. Ortelt, Joshua Grodotzki, A. Erman Tekkaya

Proceedings of the Cyber-physical Systems and Digital Twins, 2019

Development of a Remote Compression Test Lab for Engineering Education.

Alessandro Selvaggio, Siddharth Upadhya, Joshua Grodotzki, A. Erman Tekkaya

Proceedings of the Cyber-physical Systems and Digital Twins, 2019

2018

Virtual und Augmented Reality in der MINT-Lehre.

Nina Schiffeler, Joshua Grodotzki, Tobias R. Ortelt, Valerie Stehling, Ingrid Isenhardt, A. Erman Tekkaya

Proceedings of the DeLFI 2018, 2018

2017

Improvement strategies for the formfilling in incremental gear forming processes.

Peter Sieczkarek, Sebastian Wernicke, Soren Gies, A. Erman Tekkaya, Eugen Krebs, Petra Wiederkehr, Dirk Biermann, Wolfgang Tillmann, Dominic Stangier

Prod. Eng., 2017

More Than "Did You Read the Script?".

Daniel Kruse, Robert Kuska, Sulamith Frerich, Dominik May, Tobias R. Ortelt, A. Erman Tekkaya

Proceedings of the Online Engineering & Internet of Things, 2017

Demonstration of deep drawing experiments in a remote lab environment.

Joshua Grodotzki, Alessandro Selvaggio, Tobias R. Ortelt, A. Erman Tekkaya

Proceedings of the 2017 4th Experiment@International Conference (exp.at'17), 2017

Development of a FEM-lab for the virtual experimentation in forming processes.

Joshua Grodotzki, Tobias R. Ortelt, A. Erman Tekkaya

Proceedings of the 2017 4th Experiment@International Conference (exp.at'17), 2017

2016

Experimental and numerical analysis of tribological effective surfaces for forming tools in Sheet-Bulk Metal Forming.

Petra Kersting, Daniel Gröbel, Marion Merklein, Peter Sieczkarek, Sebastian Wernicke, A. Erman Tekkaya, Eugen Krebs, Dennis Freiburg, Dirk Biermann, Tim Weikert, Stephan Tremmel, Dominic Stangier, Wolfgang Tillmann, Steffen Matthias, Eduard Reithmeier, Maria Löffler, Florian Beyer, Kai Willner

Prod. Eng., 2016

Investigations of ductile damage during the process chains of toothed functional components manufactured by sheet-bulk metal forming.

Kerim Isik, Gregory Gerstein, Thomas Schneider, Robert Schulte, Daniel Rosenbusch, Till Clausmeyer, Florian Nürnberger, Milan Vucetic, Sergej Koch, Sven Hübner, Bernd-Arno Behrens, A. Erman Tekkaya, Marion Merklein

Prod. Eng., 2016

Manufacturing of functional elements by sheet-bulk metal forming processes.

Daniel Gröbel, Robert Schulte, Philipp Hildenbrand, Michael Lechner, Ulf Engel, Peter Sieczkarek, Sebastian Wernicke, Soren Gies, A. Erman Tekkaya, Bernd-Arno Behrens, Sven Hübner, Milan Vucetic, Sergej Koch, Marion Merklein

Prod. Eng., 2016

Transnational Connected Learning and Experimentation - Using live online classes and remote labs for preparing international engineering students for an international working world.

Dominik May, A. Erman Tekkaya

Int. J. Eng. Pedagog., 2016

Concepts of the international manufacturing remote lab (MINTReLab): Combination of a MOOC and a remote lab for a manufacturing technology online course.

Tobias R. Ortelt, Sabine Pekasch, Karsten Lensing, Pierre-Jean Gueno, Dominik May, A. Erman Tekkaya

Proceedings of the 2016 IEEE Global Engineering Education Conference, 2016

Integration of new concepts and features into forming technology lectures.

Tobias R. Ortelt, Soren Gies, Heinrich Traphoner, Sami Chatti, A. Erman Tekkaya

Proceedings of the 2016 IEEE Global Engineering Education Conference, 2016

Development of a tele-operative control for the incremental tube forming process and its integration into a learning environment.

Rickmer Meya, Tobias R. Ortelt, Alessandro Selvaggio, Sami Chatti, Christoph Becker, A. Erman Tekkaya

Proceedings of the 2016 IEEE Global Engineering Education Conference, 2016

Internationalization as a topic in higher engineering education: A quantitative content analysis examining the engineering curricula from ten German technical universities.

Dominik May, Karsten Lensing, A. Erman Tekkaya

Proceedings of the 2016 IEEE Global Engineering Education Conference, 2016

Remote labs in ELLI: Lab experience for every student with two different approaches.

Daniel Kruse, Sulamith Frerich, Marcus Petermann, Tobias R. Ortelt, A. Erman Tekkaya

Proceedings of the 2016 IEEE Global Engineering Education Conference, 2016

2014

What students use: Results of a survey on media use among engineering students.

Dominik May, Karsten Lensing, A. Erman Tekkaya, Michael Grosch, Ute Berbuir, Marcus Petermann

Proceedings of the IEEE Frontiers in Education Conference, 2014

2013

Friction analysis of thermally sprayed coatings finished by ball burnishing and grinding.

A. Erman Tekkaya, Matthias Kleiner, Dirk Biermann, Lars Hiegemann, Sascha Rausch, V. Franzen, Lukas Kwiatkowski, Petra Kersting

Prod. Eng., 2013

Prediction of surface roughness due to spinning in the incremental tube forming process.

C. Becker, Guillem Quintana Badosa, Matthias Hermes, B. Cavallini, A. Erman Tekkaya

Prod. Eng., 2013

miniLABs - Focused Lab Sessions in Manufacturing Technology Related to Forming Processes.

Christian Pleul, Abdelhakim Sadiki, Matthias Hermes, Sami Chatti, A. Erman Tekkaya

Int. J. Eng. Pedagog., 2013

miniLABs drop in and become fascinated by engineering experiments.

Christian Pleul, Matthias Hermes, Sami Chatti, A. Erman Tekkaya

Proceedings of the IEEE Global Engineering Education Conference, 2013

PeTEX@Work: Designing CSCL@Work for Online Engineering Education.

Claudius Terkowsky, Isa Jahnke, Christian Pleul, Dominik May, Thorsten Jungmann, A. Erman Tekkaya

Proceedings of the Computer-Supported Collaborative Learning at the Workplace, 2013

2012

The non-hydrostatic response of polymer melts as a pressure medium in sheet metal forming.

A. Erman Tekkaya, Muhammad Masood Hussain, Jörg Witulski

Prod. Eng., 2012

2011

Strategies for springback compensation regarding process robustness.

Marco Gösling, Hilke Kracker, Alexander Brosius, Sonja Kuhnt, A. Erman Tekkaya

Prod. Eng., 2011

Tele-Operated Laboratories for Online Production Engineering Education - Platform for E-Learning and Telemetric Experimentation (PeTEX).

Claudius Terkowsky, Christian Pleul, Isa Jahnke, A. Erman Tekkaya

Int. J. Online Eng., 2011

2010

Towards the flexible and near-net-shape production of three-dimensionally curved extrusion profiles.

Markus Schneider, Gregor Koehler, Dirk Becker, Alessandro Selvaggio, A. Erman Tekkaya, Christian Munzinger, Volker Schulze, Matthias Kleiner

Prod. Eng., 2010

Erratum to: On the reduction of gloss property of organic coated sheet metals after forming.

H.-D. Pham, Michael Trompeter, A. Erman Tekkaya

Prod. Eng., 2010

Tooling concepts to speed up incremental sheet forming.

Lukas Kwiatkowski, Miroslav Urban, Gerd Sebastiani, A. Erman Tekkaya

Prod. Eng., 2010

Simulation of tube wrinkling in electromagnetic compression.

O. Koray Demir, Verena Psyk, A. Erman Tekkaya

Prod. Eng., 2010

Developing Tele-Operated Laboratories for Manufacturing Engineering Education. Platform for E-Learning and Telemetric Experimentation (PeTEX).

Claudius Terkowsky, Isa Jahnke, Christian Pleul, N. Burkhardt, Roberto Licari, Per Johannssen, Gianluca Buffa, Matthias Heiner, Livan Fratini, Ernesto LoValvo, Mihai Nicolescu, Johannes Wildt, A. Erman Tekkaya

Int. J. Online Eng., 2010

Online Learning with Remote-Configured Experiments.

Isa Jahnke, Claudius Terkowsky, Christian Pleul, A. Erman Tekkaya

Proceedings of the DeLFI 2010, 2010

2009

Experimental and numerical investigation of the process chain from composite extrusion to friction stir welding regarding the residual stresses in composite extruded profiles.

Michael F. Zäh, A. Erman Tekkaya, Mirko Langhorst, M. Ruhstorfer, Alexander Schober, D. Pietzka

Prod. Eng., 2009

Integrated simulation of the process chain composite extrusion-milling-welding for lightweight frame structures.

Michael F. Zaeh, A. Erman Tekkaya, Dirk Biermann, Andreas Zabel, Mirko Langhorst, Alexander Schober, Thomas Kloppenborg, Markus Steiner, Eduard Ungemach

Prod. Eng., 2009

A drop-weight high-speed tensile testing instrument.

Matthias Kleiner, A. Erman Tekkaya, O. Koray Demir, D. Risch, Verena Psyk

Prod. Eng., 2009

New incremental methods for springback compensation by stress superposition.

Matthias Kleiner, A. Erman Tekkaya, Sami Chatti, Matthias Hermes, A. Weinrich, Noomane Ben Khalifa, Uwe Dirksen

Prod. Eng., 2009

Combination of curved profile extrusion and composite extrusion for increased lightweight properties.

Matthias Kleiner, A. Erman Tekkaya, Dirk Becker, D. Pietzka, Marco Schikorra

Prod. Eng., 2009

Increasing the Production Accuracy of Profile Bending with Methods of Computational Intelligence.

Alessandro Selvaggio, Uwe Dirksen, A. Erman Tekkaya, Marco Schikorra, Matthias Kleiner

Evol. Comput., 2009

2008

Development of ultra high performance concrete dies for sheet metal hydroforming.

Matthias Kleiner, Manfred Curbach, A. Erman Tekkaya, Robert Ritter, Kerstin Speck, Michael Trompeter

Prod. Eng., 2008

2007

Surface reconstruction for incremental forming.

A. Erman Tekkaya, Ravi Shankar, Gerd Sebastiani, Werner Homberg, Matthias Kleiner

Prod. Eng., 2007

Thermo-mechanical coupled simulation of hot stamping components for process design.

A. Erman Tekkaya, Hossein Karbasian, Werner Homberg, Matthias Kleiner

Prod. Eng., 2007

2000

Optimal initialization of manipulation dynamics by vorticity model of robot hand preshaping. Part II: Analyses of grasp initialization and its vorticity based optimization.

Aydan M. Erkmen, Ismet Erkmen, A. Erman Tekkaya

J. Field Robotics, 2000

Optimal initialization of manipulation dynamics by vorticity model of robot hand preshaping. Part I: Vorticity model.

Aydan M. Erkmen, Ismet Erkmen, A. Erman Tekkaya

J. Field Robotics, 2000

1999

Haptic perception of shape and hollowness of deformable objects using the anthrobot-III robot hand.

Ismet Erkmen, Aydan M. Erkmen, A. Erman Tekkaya, T. Pasinlioglu

J. Field Robotics, 1999